Two circular rods, one steel and the other copper, are both 0.780 m long and 1.50...
Two circular rods, one steel and the other copper, are both 0.780 m long and 1.50 cm in diameter. Each is subjected to a force with magnitude 4500 N that compresses the rod.
What is the difference in the length of the two rods when compressed?
Homework Answers
Please rate me positive.. I hope it was helpful.. your rating is important..
Add Answer to:
Two circular rods, one steel and the other copper, are both
0.780 m long and 1.50...
Two metal rods of equal length-one aluminum, the other stainless steel-are connected in parallel with a...
Two metal rods of equal length-one aluminum, the other stainless steel-are connected in parallel with a temperature of 22.0 ∘ C at one end and 130 ∘ C at the other end. Both rods have a circular cross section with a diameter of 2.50 cm. Part A : Determine the length the rods must have if the combined rate of heat flow through them is to be 30.0 J per second.Please express answer in meters. Part B: If the length...
Two rods, one made of brass and the other made of copper, are joined end to...
Two rods, one made of brass and the other made of copper, are joined end to end. The length of the brass section is 0.160 m and the length of the copper section is 0.640 m. Each segment has cross-sectional area 0.00680 m². The free end of the brass segment is in boiling water and the free end of the copper segment is in an ice and water mixture, in both cases under normal atmospheric pressure. The sides of the...
A copper rod and a steel rod are heated. At 0 ◦C the copper rod has...
A copper rod and a steel rod are heated. At 0 ◦C the copper rod has a length of LC, the steel one has a length of LS. When the rods are being heated or cooled, a difference of 5.73 cm is maintained between their lengths. If αC = 1.7 × 10−5 ( ◦C)−1 and αS = 1.2 × 10−5 ( ◦C)−1 , 1) Find the value of Lc. 2) Find the value of Ls. Answer in units of cm.
Two parallel rods are each 0.39 m in length. They are attached at their centers to...
Two parallel rods are each 0.39 m in length. They are attached at their centers to a spring that is initially neither stretched nor compressed. The spring has a spring constant of 220 N/m. When 1200 A of current is in each rod in the same direction, the spring is observed to be compressed by 2.7 cm. Treat the rods as long, straight wires and find the separation between them when the current is present. Number i Units The x,...
Dimensions in mm 180- --120---100 100 Problem 1: Two cylindrical rods, one of steel (Ex =...
Dimensions in mm 180- --120---100 100 Problem 1: Two cylindrical rods, one of steel (Ex = 200 GPa) and the other of brass (Eb = 105 GPa), are joined at C and restrained by rigid supports at A and E. For the loading shown, determine: (a) the reactions at A and E, (b) the deflection of point C. cl DE Brass Steel B. 760 KN 40KN 40-mm diam. 30-mm diam. Problem 2: A 15-mm-diameter rod made of an experimental plastic...
Two parallel rods are each 0.38 m in length. They are attached at their centers to...
Two parallel rods are each 0.38 m in length. They are attached at their centers to a spring that is initially neither stretched nor compressed. The spring has a spring constant of 200 N/m. When 960 A of current is in each rod in the same direction, the spring is observed to be compressed by 2.5 cm. Treat the rods as long, straight wires and find the separation between them when the current is present.
Two parallel rods are each 0.59 m in length. They are attached at their centers to...
Two parallel rods are each 0.59 m in length. They are attached at their centers to a spring that is initially neither stretched nor compressed. The spring has a spring constant of 190 N/m. When 1300 A of current is in each rod in the same direction, the spring is observed to be compressed by 1.7 cm. Treat the rods as long, straight wires and find the separation between them when the current is present. Number Units the tolerance is...
Exercise 17.56 Two rods, one made of brass and the other made of copper, are joined...
Exercise 17.56 Two rods, one made of brass and the other made of copper, are joined end to end. The length of the brass section is 0.200 m and the length of the copper section is 0.800 m. Each segment has cross-sectional area 0.00700 m2 The free end of the brass segment is in boiling water and the free end of the copper segment is in an ice-water mixture, in both cases under normal atmospheric pressure. The sides of the...
Chapter 21, Problem 83 Two parallel rods are each 0.52 m in length. They are attached...
Chapter 21, Problem 83 Two parallel rods are each 0.52 m in length. They are attached at their centers to a spring that is initially neither stretched nor compressed. The spring has a spring constant of 220 N/m. When 1100 A of current is in each rod in the same direction, the spring is observed to be compressed by 2.4 cm. Treat the rods as long, straight wires and find the separation between them when the current is present. Number...
A brass rod with a length of 1.50 m and a cross-sectional area of 2.50 cm2...
A brass rod with a length of 1.50 m and a cross-sectional area of 2.50 cm2 is fastened end to end to a nickel rod with length L and cross-sectional area 0.880 cm2 . The compound rod is subjected to equal and opposite pulls of magnitude 3.46×104 N at its ends. a.Find the length L of the nickel rod if the elongations of the two rods are equal. b.What is the stress in the brass rod? c.What is the stress...
Two parallel rods are each 0.39 m in length. They are attached at their centers to a spring that is initially neither stretched nor compressed. The spring has a spring constant of 220 N/m. When 1200 A of current is in each rod in the same direction, the spring is observed to be compressed by 2.7 cm. Treat the rods as long, straight wires and find the separation between them when the current is present. Number i Units The x,...
Dimensions in mm 180- --120---100 100 Problem 1: Two cylindrical rods, one of steel (Ex = 200 GPa) and the other of brass (Eb = 105 GPa), are joined at C and restrained by rigid supports at A and E. For the loading shown, determine: (a) the reactions at A and E, (b) the deflection of point C. cl DE Brass Steel B. 760 KN 40KN 40-mm diam. 30-mm diam. Problem 2: A 15-mm-diameter rod made of an experimental plastic...
Two parallel rods are each 0.59 m in length. They are attached at their centers to a spring that is initially neither stretched nor compressed. The spring has a spring constant of 190 N/m. When 1300 A of current is in each rod in the same direction, the spring is observed to be compressed by 1.7 cm. Treat the rods as long, straight wires and find the separation between them when the current is present. Number Units the tolerance is...
Exercise 17.56 Two rods, one made of brass and the other made of copper, are joined end to end. The length of the brass section is 0.200 m and the length of the copper section is 0.800 m. Each segment has cross-sectional area 0.00700 m2 The free end of the brass segment is in boiling water and the free end of the copper segment is in an ice-water mixture, in both cases under normal atmospheric pressure. The sides of the...
Chapter 21, Problem 83 Two parallel rods are each 0.52 m in length. They are attached at their centers to a spring that is initially neither stretched nor compressed. The spring has a spring constant of 220 N/m. When 1100 A of current is in each rod in the same direction, the spring is observed to be compressed by 2.4 cm. Treat the rods as long, straight wires and find the separation between them when the current is present. Number...
Most questions answered within 3 hours.
-
Hydrobromic acid
dissolves solid iron according to the followiaung reaction:
Fe(s)+2HBr(aq)→
FeBr2(aq)+ H2(g)
Part A. What...
asked 1 hour ago -
Verify the following vector identity in SPHERICAL
COORDINATES.
div(curl(A)) = 0
asked 3 hours ago -
The work function (Φ) for a metal is 7.50×10-19 J.
What is the longest wavelength (nm)...
asked 3 hours ago -
1. Would the following procedural changes cause the
calculated mass percent Ni2+ ion in Ni(NH3)nCl2 to...
asked 5 hours ago -
1. Why does the voltage of the capacitor vary with frequency?
where does this missing voltage...
asked 6 hours ago -
p p please write each step out clearly
3. A manager of a company is considering...
asked 5 hours ago -
On October 1, Ebony Ernst organized Ernst Consulting; on October
3, the owner contributed $83,540 in...
asked 6 hours ago -
A.)As an electron moves through a region of space, its speed
decreases from 9.60 × 106...
asked 6 hours ago -
In java with the netbeans program do:
Through object programming
Create a class "ContadorP", which is...
asked 6 hours ago -
Pattern Corporation acquired all of Science
Company's outstanding stock on January 1, 2016 for $600,000 cash....
asked 6 hours ago -
Here are all accounts Tyler Co. maintains.
Tax expenses $4,750
Common stocks $48,840
SG&A expenses $2,500...
asked 7 hours ago -
Lis
out the types and equation of wind profile and the respective
variables in the fds...
asked 7 hours ago