A cylindrical vessel with a volume if 20,000 L and a diameter of 2m is oriented vertically and partially filled with a hydrocarbon with a specific gravity of 0.85. The pressure in the vapor space above the liquid in a tank is 4psig, A water manometer, open to the atmosphere, attached to the bottom of the tank is 20.25 ft. Determine the volume of liquid in the tank?
A cylindrical vessel with a volume if 20,000 L and a diameter of 2m is oriented...
DO NOT post from solutions manual
3) The diameter of a cylindrical water tank is Do and its height is H. The tank is filled with water, which is open to the atmosphere. An orifice of diameter D with a smooth entrance (i.e., negligible losses) is open at the bottom. Develop a relation for the time required for the tank (a) to empty halfway and (b) to empty completely
1. A 4-ft diameter open cylindrical tank, 6 ft high, is filled with water. The tank is tilted to a position such that its water surface will cut the diameter of the base. Calculate the volume of water left in the tank. a. 16 cu. ft c. 13 cu. ft b. 18 cu.ft d. 14 cu. ft Americana A Crans-
7 Water is flowing into the top of an open cylindrical tank (diameter D) at a volume flow rate of e and out of a hole in the bottom at a rate of O The tank is made of wood that is very porous and the water is leaking out through the wall uniformly at a rate of q per unit of wetted surface area. The initial depth of water in the tank is 2,. Derive an equation for the...
A fluid of constant density (p) at 40 °F (T) is flowing into an initially empty cylindrical tank of radius 10 ft. The cylindrical vešsel is jacketed and heated with saturated steam (T) at 212 °F.The steam jacket does not cover either the top or bottom of the tank. The heat capacity of liquid (Cp liquid is near to that of water. The vessel is well stirred and the heat resistance of the jacket is negligible as are the heat...
Due Date: Group: Process Instrumentation -Lab 4 Exercise 7. psi An open atmospheric vessel containing an unknown mixture, A direct level measurement determined the level h 30.9 ft. Bottom tank pressure P. gauge reads 11.7 psig. The density of the material is unknown. Known: • specific weight of water is 62.43 lbs/ft. • External pressure is 1 atm • P=SGxh a is the material water? Yes No b. Explain why and show work that validates your answer: c. Determine the...
question #1 pls
assume stick is vertically inserted Consider a horizontally-positioned right circular cylindrical oil tank of radius r and length h as in the figure. The tanks are used for storage in various locations and are drained and filled periodically. Inventory is taken by placing a long dipstick with quarter-inch marks vertically in the tank, and then measuring the liquid level w. 1 1). If all variables r, h, and w are in inches, use calculus to find a...
1. Atall cylindrical tank, held above ground on stilts, is partially filled with water. (See top figure). The tank has a diameter, D. At time equal to zero, a hole of diameter d is poked in the bottom of the tank, where d<< D. Let z-0 correspond to the bottom of the tank. The initial fluid height is za. Had Use Bernoulli equation to assess the velocity of the fluid as it leaves the bottom of the tank as a...
need help with these 3
questions im stuck!
A closed tank having a volume of 62 L is filled with 0.1 kg of a gas. A pressure gauge attached to the tank reads 270 kPa when the gas temperature is 20°C. Assuming ideal gas behaviour, the gas in the tank is most likely: cross out Select one: O a. Air; O b. Carbon dioxide; c. Oxygen; cross out cross out d. None of the above cross out An open (to...