Homework Answers
Solution :-
Given in the question,
Temperature(T1) = 20°c +273.15 = 293.15
P2= 38atm
V 2= 1/8
P1V1/T1 = P2V2/T2
=> 1 x 1/(293.15) = 38 x (1/8)/T2
=> T2 = (38/8) x 293.15 = 1392.4625 K = 1392.4625 - 273.15 = 1119.3125 C
Add Answer to:
Constants PartA In an internal combustion engine, air at atmospheric pressure and a temperature of about...
In an internal combustion engine, air at atmospheric pressure and temperature of 20⁰ C is compressed...
In an internal combustion engine, air at atmospheric pressure and temperature of 20⁰ C is compressed to 1/10 of its original volume. Calculate the final temperature when the pressure reaches 40 atmospheres.
INTERNAL COMBUSTION ENGINES Practice Problems ME 436 A 3 cylinder, 2.7 liter SI engine operates on...
INTERNAL COMBUSTION ENGINES Practice Problems ME 436 A 3 cylinder, 2.7 liter SI engine operates on a 4 stroke cycle at 3300 RPM with a compression ratio of 8.6:1. At the start of the compression stroke, the temperature is 47°C and the pressure is 82kPa. Assume 3% residual gases. The mechanical efficiency is 81%, combustion efficiency is 96%, and the air-fuel ratio is 16.3, and the fuel heating value is 43,000 kJ/kg. The combustion process starts at TDC and is...
6. A four-cylinder, four-stroke internal combustion engine operates at 3200 RPM. The processes within each cylinder...
6. A four-cylinder, four-stroke internal combustion engine operates at 3200 RPM. The processes within each cylinder are modeled as an air-standard Otto cycle with a pressure of 14.7 lbf/in2, a temperature of 85 °F, and a volume of 0.025 ft at the beginning of compression. The compression ratio is 12, and maximum pressure in the cycle is 1150 lbf/in.2 Determine, using a cold air-standard analysis with k 1.4, the power developed by the engine, in horsepower, and the mean effective...
Problem 1 (65 pts): The cylinder of a Diesel engine is initially filled with air at 100 kPa and 2...
Problem 1 (65 pts): The cylinder of a Diesel engine is initially filled with air at 100 kPa and 298 K (piston is at BDC). The air is then compressed isentropically with a compression ratio of 20. Fuel, n-dodecane, is then introduced and combusted with the air, which produces work output (i.e. pushes the piston back to BDC). At the end of the power stroke, the temperature of the combustion products is 1020 K. The amount of heat lost to...
A gasoline engine operates on the air standard Otto cycle. The air intake to the engine...
A gasoline engine operates on the air standard Otto cycle. The air intake to the engine is at 300K and 95kPa (State 1). The air is compressed in the engine to an unknown pressure. Heat is then added during combustion at an amount of 1100 kJ/kg. At the end of the heat addition process, the temperature reaches 2200K. Compute the following: (a) the temperature at the end of the compression process, (b) the volumetric compression ratio of this engine, (c)...
A fuel-air mixture with a fuel-to-air equivalence ratio of 0.6 enters an engine cylinder at 400...
A fuel-air mixture with a fuel-to-air equivalence ratio of 0.6 enters an engine cylinder at 400 K where it is then compressed. After compression the mixture is at 750 K. Calculate the power needed for this compression process if the air mass flow rate is 100 kg/hr. Also calculate the compression ratio for this process. Textbook : John B. Heywood - Internal Combustion Engine Fundamentals 2nd Edition
İdi ner An ideal diesel engine The state of air at the beginning of the e maximum temperature in the eycle air) (us...
İdi ner An ideal diesel engine The state of air at the beginning of the e maximum temperature in the eycle air) (using variable specific hea a) Draw the P- has a compression ratio of 20 and uses air as the com 2200K and the cutoff ratio is 1.2. is is 100 kPa and 27C he t) (25marks) V diagram of the diesel cyele termine the internal energies at the beginning and the end of the com pression, end of...
The displacement volume of an internal combustion engine is 2.17 liters. The processes within each cylinder...
The displacement volume of an internal combustion engine is 2.17 liters. The processes within each cylinder of the engine are modeled as an air-standard Diesel cycle with a cutoff ratio of 2.5. The state of the air at the beginning of compression is fixed by p1 = 1.6 bar, T1 = 325 K and V1 = 2.36 liters. If the cycle is executed 2100 times per min, determine: a) the compression ratio, b) the net work per cycle, in kJ,...
In the course of pumping up a bicycle tire, a liter of air at atmospheric pressure...
In the course of pumping up a bicycle tire, a liter of air at atmospheric pressure is compressed ISOTHERMALLY to a pressure of 7 atm. (Air is mostly diatomic and oxygen). (a) if the temperature is initially 300 K, what is the temperature after compression? (b) what is the final volume of this air after compression? (c) how much work is done in compressing the air?
During a compression stroke of a cylinder in a diesel engine, the air pressure in the...
During a compression stroke of a cylinder in a diesel engine, the air pressure in the cylinder increases from 1.0×105N/m2 to 60 ×105N/m2, and the temperature increases from 26 ∘C to 544 ∘C. A.) Determine the compression ratio for this engine. Should be written as V2/V1
INTERNAL COMBUSTION ENGINES Practice Problems ME 436 A 3 cylinder, 2.7 liter SI engine operates on a 4 stroke cycle at 3300 RPM with a compression ratio of 8.6:1. At the start of the compression stroke, the temperature is 47°C and the pressure is 82kPa. Assume 3% residual gases. The mechanical efficiency is 81%, combustion efficiency is 96%, and the air-fuel ratio is 16.3, and the fuel heating value is 43,000 kJ/kg. The combustion process starts at TDC and is...
6. A four-cylinder, four-stroke internal combustion engine operates at 3200 RPM. The processes within each cylinder are modeled as an air-standard Otto cycle with a pressure of 14.7 lbf/in2, a temperature of 85 °F, and a volume of 0.025 ft at the beginning of compression. The compression ratio is 12, and maximum pressure in the cycle is 1150 lbf/in.2 Determine, using a cold air-standard analysis with k 1.4, the power developed by the engine, in horsepower, and the mean effective...
Problem 1 (65 pts): The cylinder of a Diesel engine is initially filled with air at 100 kPa and 298 K (piston is at BDC). The air is then compressed isentropically with a compression ratio of 20. Fuel, n-dodecane, is then introduced and combusted with the air, which produces work output (i.e. pushes the piston back to BDC). At the end of the power stroke, the temperature of the combustion products is 1020 K. The amount of heat lost to...
A gasoline engine operates on the air standard Otto cycle. The air intake to the engine is at 300K and 95kPa (State 1). The air is compressed in the engine to an unknown pressure. Heat is then added during combustion at an amount of 1100 kJ/kg. At the end of the heat addition process, the temperature reaches 2200K. Compute the following: (a) the temperature at the end of the compression process, (b) the volumetric compression ratio of this engine, (c)...
İdi ner An ideal diesel engine The state of air at the beginning of the e maximum temperature in the eycle air) (using variable specific hea a) Draw the P- has a compression ratio of 20 and uses air as the com 2200K and the cutoff ratio is 1.2. is is 100 kPa and 27C he t) (25marks) V diagram of the diesel cyele termine the internal energies at the beginning and the end of the com pression, end of...
Most questions answered within 3 hours.
-
Which of the following describes a private network?
1. A wide area network (WAN) linking sites...
asked 14 minutes ago -
The purpose of this
lab: Wireshark Intro Lab
is to get students
familiar with the use of...
asked 22 minutes ago -
Question 3
A 50 percent deduction is allowed for amounts paid or incurred for
dues and...
asked 21 minutes ago -
Assuming that the wave speed varies little when sound waves are
traveling through a material that...
asked 36 minutes ago -
The rise of online shopping and Amazon, in particular, has
created major dilemmas for large food/CPG...
asked 35 minutes ago -
Is oxygen difluoride polar or nonpolar?
nonpolar
polar
ionic
none of the above
asked 46 minutes ago -
Starting from rest, a car accelerates at a constant rate of 2.6
m/s2 for a time...
asked 43 minutes ago -
A pharmaceutical company wants to answer the question whether
time for a drug in pill form...
asked 45 minutes ago -
) Assume that in the market for widgets, demand is highly
elastic compared to supply. If...
asked 56 minutes ago -
Why is a personal interview the most important step in the sales
selection process? What are...
asked 1 hour ago -
In Python rOverlap (x1, y1, w1, h1, x2, y2, w2, h2) A rectangle
is axis-aligned if...
asked 1 hour ago -
If we observe in a protein solution that DNA is causing a
mixture 260/280 ratio ~0.9,...
asked 1 hour ago