A force of 6024 N is applied outwardly to each end of a 6-m long rod...
A force of 6024 N is applied outwardly to each end of a 6-m long rod with a radius of 42 mm and a Young's modulus of 125 x 108 N/m2. What is the elongation of the rod (in mm)?
Homework Answers
Add Answer to:
A force of 6024 N is applied outwardly to each end of a 6-m long
rod...
A shearing force of 1250 N is applied to a brass rod with a length of...
A shearing force of 1250 N is applied to a brass rod with a length of 25.0 m and radius r = 1.27 cm. The shear modulus of brass is 35.0 x 109 N/m2. As a result the rod is sheared through a distance in mm of:
A metal rod that is 4.0 m long and 0.05 m2 in cross-sectional area is found to stretch 0.01 m under a tension of 50...
A metal rod that is 4.0 m long and 0.05 m2 in cross-sectional area is found to stretch 0.01 m under a tension of 5000 N. What is Young's modulus (in N/m2) for this metal? Tensile stress_FI/A Tensile strainAll Filo A Al 4 x 106 1 x 107 4 x 108 1x 108 4 x 10
My Notes A rod has a 1.3 m long section that is cast iron and a...
My Notes A rod has a 1.3 m long section that is cast iron and a 2.6 m long section that is aluminum as shown in the diagram below 020 cm Rod 1 13m The diameter of the cylindrical rod is 0.40 cm. Yt subjected to a force of 7.3 x 103 N -100 x 1010 N/m2 and Y u 7x 1010 N/m2. How much elongation (in cm) is produced in the rod when it is cm
My Notes A...
Displacement analysis:A tapered rod is suspended from the ceiling. A 2KN tensile force is applied to the free end....
Displacement analysis:A tapered rod is suspended from the ceiling. A 2KN tensile force is applied to the free end. The rod is made of Alloy Steel .Calculate the theoretical value of elongation using the formula in chapter 4 Draw the part in SolidWorks. Choose "mm" as your unit. Constrain all sketches and save it as elongation.SLDPRT. See file "ElongationAnalysis PartDimensions" for member dimensions. Follow instruction of "Elongation Analysis" to perform simulation on this part. Save the displacement plot as a...
A rod has a 1.3 m long section that is cast iron and a 2.6 m...
A rod has a 1.3 m long section that is cast iron and a 2.6 m long section that is aluminum as shown in the diagram below. 0.20 cm Rod 1 Rod 2 1.3 m 2.6 m = 100 x 1010 N/m2 and Y. The diameter of the cylindrical rod is 0.40 cm. Y cast iron 8.1 x 103 N? = 7 * 1010 N/m2. How much elongation (in cm) is produced in the rod when it is subjected to...
A copper (Young's modulus 1.1 x 1011 N/m2) cylinder and a brass (Young's modulus 9.0 x...
A copper (Young's modulus 1.1 x 1011 N/m2) cylinder and a brass (Young's modulus 9.0 x 1010 N/m2) cylinder are stacked end to end, as in the drawing. Each cylinder has a radius of 0.38 cm. A compressive force of F = 8600 N is applied to the right end of the brass cylinder. Find the amount by which the length of the stack decreases.
A diamond rod and a tungsten rod have the same length and diameter and are subjected...
A diamond rod and a tungsten rod have the same length and diameter and are subjected to the same force. If the diamond rod stretches by 2.30 times 10^-6 m, by what amount will the tungsten rod stretch? Young's modulus for diamond = 1.22 times 10^12 N/m^2; for tungsten = 3.60 times 10^11 N/m^2. A spider of mass 7.0 times 10^-4 kg hangs from a 75.4-cm-long thread whose diameter is 2.0 times 10^-3 mm. Young's modulus of thread is 3....
1. A tensile force of 100 kN is applied on a 0.02 m diameter 2 m...
1. A tensile force of 100 kN is applied on a 0.02 m diameter 2 m length rod. After applying the load, the diameter of the rod decreases to 0.01998 m and the length increases to 2.01 m. What is the Poisson's Ratio of this material? 2. A tensile force of 100 kN is applied on a 0.02 m diameter 2 m length rod. After applying the load, the diameter of the rod decreases to 0.01998 m and the length...
A graphene rod and a brass rod have the same length and diameter and are subjected...
A graphene rod and a brass rod have the same length and diameter and are subjected to the same force. If the graphene rod stretches by 2.60X 10^-6 m, by what amount will the brass rod stretch? Young's modulus for graphene = 1.00x 10^12 N/m2; for brass = 9.00X 10^10 N/m2.
Q1. A circular rod of 12 mm diameter was tested for tension. The total elongation on...
Q1. A circular rod of 12 mm diameter was tested for tension. The total elongation on a 300 mm length was 0.22 mm under a tensile load of 17 KN. Find the value of E. (2.5 Marks) Answer: Q2. A prismatic bar has a cross section of 25 mm x 50 mm and a length of 2m under an axial force of 90 KN. The measured elongation of the bar is 1.5 mm. Compute the tensile stress and strain in...
A shearing force of 1250 N is applied to a brass rod with a length of 25.0 m and radius r = 1.27 cm. The shear modulus of brass is 35.0 x 109 N/m2. As a result the rod is sheared through a distance in mm of:
A metal rod that is 4.0 m long and 0.05 m2 in cross-sectional area is found to stretch 0.01 m under a tension of 5000 N. What is Young's modulus (in N/m2) for this metal? Tensile stress_FI/A Tensile strainAll Filo A Al 4 x 106 1 x 107 4 x 108 1x 108 4 x 10
My Notes A rod has a 1.3 m long section that is cast iron and a 2.6 m long section that is aluminum as shown in the diagram below 020 cm Rod 1 13m The diameter of the cylindrical rod is 0.40 cm. Yt subjected to a force of 7.3 x 103 N -100 x 1010 N/m2 and Y u 7x 1010 N/m2. How much elongation (in cm) is produced in the rod when it is cm
My Notes A...
Displacement analysis:A tapered rod is suspended from the ceiling. A 2KN tensile force is applied to the free end. The rod is made of Alloy Steel .Calculate the theoretical value of elongation using the formula in chapter 4 Draw the part in SolidWorks. Choose "mm" as your unit. Constrain all sketches and save it as elongation.SLDPRT. See file "ElongationAnalysis PartDimensions" for member dimensions. Follow instruction of "Elongation Analysis" to perform simulation on this part. Save the displacement plot as a...
A rod has a 1.3 m long section that is cast iron and a 2.6 m long section that is aluminum as shown in the diagram below. 0.20 cm Rod 1 Rod 2 1.3 m 2.6 m = 100 x 1010 N/m2 and Y. The diameter of the cylindrical rod is 0.40 cm. Y cast iron 8.1 x 103 N? = 7 * 1010 N/m2. How much elongation (in cm) is produced in the rod when it is subjected to...
A diamond rod and a tungsten rod have the same length and diameter and are subjected to the same force. If the diamond rod stretches by 2.30 times 10^-6 m, by what amount will the tungsten rod stretch? Young's modulus for diamond = 1.22 times 10^12 N/m^2; for tungsten = 3.60 times 10^11 N/m^2. A spider of mass 7.0 times 10^-4 kg hangs from a 75.4-cm-long thread whose diameter is 2.0 times 10^-3 mm. Young's modulus of thread is 3....
1. A tensile force of 100 kN is applied on a 0.02 m diameter 2 m length rod. After applying the load, the diameter of the rod decreases to 0.01998 m and the length increases to 2.01 m. What is the Poisson's Ratio of this material? 2. A tensile force of 100 kN is applied on a 0.02 m diameter 2 m length rod. After applying the load, the diameter of the rod decreases to 0.01998 m and the length...
Q1. A circular rod of 12 mm diameter was tested for tension. The total elongation on a 300 mm length was 0.22 mm under a tensile load of 17 KN. Find the value of E. (2.5 Marks) Answer: Q2. A prismatic bar has a cross section of 25 mm x 50 mm and a length of 2m under an axial force of 90 KN. The measured elongation of the bar is 1.5 mm. Compute the tensile stress and strain in...
Most questions answered within 3 hours.
-
a student was diagnosed with myopia (nearshightedness). He can
comfortably read a newspaper when it is...
asked 12 minutes ago -
What is the significance of the constraints in a physical model?
What part do distinct constraints...
asked 31 minutes ago -
Consider a 3m x 3m window in a house. The thermal conductivity
is reported to be...
asked 48 minutes ago -
Why has California been the favorite destination of large number
of secondary migrants?
asked 1 hour ago -
Do not neglect the old for the new. The existing business must
not lose priority simply...
asked 4 hours ago -
Kylie is a single mom with two dependent children,
Tanner, age 7 and Olivia, age 11....
asked 5 hours ago -
Phosphorous + bromine = phosphorous tribromide. If 35.0 g of
bromine are reacted and 27.9 grams...
asked 7 hours ago -
Derive the long wavelength limit of the Planck energy density
distribution
asked 6 hours ago -
Calculate the pH of each of the following solutions.
0.50 M HBr
3.1×10−4 M KOH
4.2×10−5...
asked 10 hours ago -
For the year ended December 31, Depot Max’s cost of merchandise
sold was $85,600. Inventory at the...
asked 10 hours ago -
Week 10 - Professional Memo Assignment
Professional Memo Assignment
Your mission for this week, should you...
asked 10 hours ago -
Write a Python program that stores the data for each
player on the team, and it...
asked 10 hours ago