Hi,
Hope you are doing well.
__________________________________________________________________________
PART (a):
Given that:
Distance/radius from center of rotation to the point, for blade 1,
Distance/radius from center of rotation to the point, for blade 2,
Angular speed,
Therefore, Linear speed is given by:
__________________________________________________________________________
PART (b):
Given that, Time taken is 11.2 s
__________________________________________________________________________
PART (c):
Translational distances covered is given by:
__________________________________________________________________________
PART (c):
Centripetal acceleration is given by:
__________________________________________________________________________
Hope this helped for your studies. Keep learning. Have a good day.
Feel free to clear any doubts at the comment section.
Please don't forget to give a thumps
up.
Thank you. :)
The blades on modern wind turbines are typically 20 to 40 meters in length. Two different...
Multiple-Concept Example 7 explores the approach taken in problems such as this one. The blades of a ceiling fan have a radius of 0.376 m and are rotating about a fixed axis with an angular velocity of +1.19 rad/s. When the switch on the fan is turned to a higher speed, the blades acquire an angular acceleration of +2.96 rad/s2. After 0.488 s have elapsed since the switch was reset, what is (a) the total acceleration (in m/s2) of a...
Review Icon Modern wind turbines are larger than they appear, and despite their apparently lazy motion, the speed of the blades tips can be quite high-many times higher than the wind speed. A turbine has blades 51 m long that spin at 14 rpm (Figure 1) Part A At the tip of a blade, what is the speed? Express your answer with the appropriate units. Figure 1 of 1 H Value Units Submit Request Answer At the tip of a...
Please let it be legible, thanks in advance! Hw 1 P 7 Modern wind turbines are larger than they appear, and despite their apparently lazy motion, the speed of the blades tips can be quite high-many times higher than the wind speed. A turbine has blades 51 m long that spin at 14 rpm (Figure 1) Part A At the tip of a blade, what is the speed? Express your answer with the appropriate units. Figure 1 of 1 НА...
A windmill has three blades that can extend or retract depending on the wind speed. Each blade can be approximated by a rod with a mass of 270 kg that is fixed at one end. The moment of inertia of each blade is 1/3 ML2, where L is the length of the blade. Each blade is 9.0 m long. Calculate the total moment of inertia of the windmill. The wind causes the windmill to rotate with a constant speed in...
A helicopter has two blades (see figure), each of which has a mass of 250 kg and can be approximated as a thin rod of length 6.7 m. The blades are rotating at an angular speed of 53 rad/s. (a) What is the total moment of inertia of the two blades about the axis of rotation? (a) Determine the rotational kinetic energy of the spinning blades.
A helicopter has two blades (see figure), each of which has a mass of 240 kg and can be approximated as a thin rod of length 6.7 m. The blades are rotating at an angular speed of 43 rad/s. (a) What is the total moment of inertia of the two blades about the axis of rotation? (a) Determine the rotational kinetic energy of the spinning blades.
A model of a helicopter rotor has four blades, each of length 3.1 m from the central shaft to the blade tip. The model is rotated in a wind tunnel at a rotational speed of 520 rev/min. Part A What is the linear speed of the blade tip? Express your answer in meters per second. Part B What is the radial acceleration of the blade tip expressed as a multiple of the acceleration of gravity, g? Express your answer as...
A helicopter blade has an angular speed of 40.8 rad/s and an angular acceleration of 8.17 rad/s2. What are the tangential and normal components of acceleration in m/s Length of each blade is 6.7 m. O an-54.74 m/s2 and a 1115.3 m/s2 O a 54.74 m/s2 and an- 11153 m/s2 O at 54.74 m/s2 and an 273.36 m/s2 O at 74.54 m/s2 and an 111.53 m/s2
An electric ceiling fan is rotating about a fixed axis with an initial angular velocity magnitude of 0.300 rev/s . The magnitude of the angular acceleration is 0.883 rev/s2 . Both the the angular velocity and angular accleration are directed counterclockwise. The electric ceiling fan blades form a circle of diameter 0.790 m . Compute the fan's angular velocity magnitude after time 0.192 s has passed. Through how many revolutions has the blade turned in the time interval 0.192 s...
An electric ceiling fan is rotating about a fixed axis with an initial angular velocity magnitude of 0.270 rev/s . The magnitude of the angular acceleration is 0.905 rev/s2 . Both the the angular velocity and angular accleration are directed counterclockwise. The electric ceiling fan blades form a circle of diameter 0.780 m Part A Compute the fan's angular velocity magnitude after time 0.200 s has passed. Part B Through how many revolutions has the blade turned in the time...