The steel bolt has a diameter of 8 mm and fits through an aluminum sleeve as...
Part A The plug has a diameter of 30 mm and fits within a rigid sleeve having an inner diameter of 32 mm Both the plug and the sleeve are 50 mm long. The plug is made from a material for which E 1 MPa,v 0.4 Determine the axial pressure p that must be applied to the top of the plug to cause it to contact the sides of the sleeve Express your answer to three significant figures and include...
Chapter 5, Reserve Problem 079 (Multistep) A cylindrical bronze sleeve (2) is held in compression against a rigid machine wall by a high-strength steel bolt (1), as shown in the figure. The steel [E = 204 GPa; a = 11.7 x 10-6/°C] bolt has a diameter of 24 mm. The bronze [E = 105 GPa; a = 22.0 x 10-6/°C] sleeve has an outside diameter of 72 mm, a wall thickness of 8 mm, and a length of L =...
Problem #3: A 6.5mm diameter steel bolt is placed through an aluminum tube as shown in the figure below. The nut is turned until finger tight. The temperature of the assembly is raised 85°C. Find the force in the bolt and the aluminum tube resulting from the temperature change. For the aluminum tube use E 72 GPa, a 23x10, with OD-7.5 mm and wall thickness of.80mm, and the steel bolt E 210 GPa, a 12x10 6 (SHOW ALL OF YOUR...
1. The inner core of an optical fiber has a diameter of 0.1 mm and an index of refraction of n1 = 1.5. The outer core of the fiber has an index of refraction of n2 = 1.49. 12 = 1.49 ni = 1.5 n2 = 1.49 (a) (7 points) Coming from air, what is the largest angle relative to the aris of the fiber for which light is totally internally reflected in the fiber? (b) (6 points) I want...