Homework Answers
6. Problem 3 (20 points): A Steam in a heating system flows through tubes whose outer...
6. Problem 3 (20 points): A Steam in a heating system flows through tubes whose outer diameter is 3 cm and whose walls are maintained at a temperature of 120°C. Circular aluminum alloy fins (k = 180 W/m.) of outer diameter 6 cm and constant thickness t 2 mm are attached to the tube, as shown in the figure below. The space between the fins is 3 mm, and thus there are 200 fins per meter length of the tube....
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate...
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate per unit length of the tube due to free convection. 2) Air at -10°C flows at 10 m/s over the roof plate of two 5m length rooms whose air is at Too-200C. The roof plate is 0.20-m thick concrete (k = 0.6 w/ m. K)....
Water enters a 20-mm tube at 27°C with a flow rate of 450 kg/h. The rate...
Water enters a 20-mm tube at 27°C with a flow rate of 450 kg/h. The rate of heat transfer from the tube wall to the fluid is given as q5'(W/m) - a x, where the coefficient a is 20 W/m2 and x (m) is the axial distance from the tube entrance. (a) Beginning with a properly defined differential control volume in the tube, derive an expression for the temperature distribution T m(x) of the water. Use this expression to determine...
Q5 A process fluid is flowing with a velocity of 4 m/s in a steel pipe...
Q5 A process fluid is flowing with a velocity of 4 m/s in a steel pipe having a diameter of 187 mm and a length of 1 m and maintaining the pipe surface temperature of 96.C. The fluid is entering the pipe at a temperature of 25 C and leaving with a temperature of 76C, take Prandtl number as 12. The density and viscosity of the fluid are 1210 kg/m?, 1 x10Ns/m respectively and its thermal conductivity is 5x102 w/mk....
A 70-mm diameter hot solid rod is suspended in a room in which the air and walls are at 25°C
A 70-mm diameter hot solid rod is suspended in a room in which the air and walls are at 25°C., The surface temperature of the rod and its emissivity are 200°C and 0.8, respectively. The associated coefficient of convective heat transfer from the rod surface to the air is 15 W/m2.K. If the total heat loss from the surface area of the rod is estimated to be 947 W, what is the length of the rod? Area of both sides of the...
Water flows through a 0.5 mm thick tube ( thermal conductivity of 16 W/m..C) with a...
Water flows through a 0.5 mm thick tube ( thermal conductivity of 16 W/m..C) with a inner diameter of 1.5 cm at 70°C such that the convective heat transfer coefficient is 3500 W/m² . •C. Let us consider the outside of the tube is 20oC and it loses heat by free convection with ho=7.6W/m² • •C. a. Draw the schematic diagram of the process b. Find out which one is the controlling resistance c. Calculate the overall heat-transfer coefficient per...
Steam in a heating system flows through a 1-m long tube whose outer diameter is DI...
Steam in a heating system flows through a 1-m long tube whose outer diameter is DI = 4 cm and whose walls are maintained at a temperature of T, = 120 °C. Circular fins (k = 46 W/m. °C) of outer diameter D2 = 8 cm and constant thickness t= 3 mm are attached to the tube, as shown in the figure. The space between the fins is 7 mm. Heat is transferred to the surrounding air at T =...
A) Determine the convection heat transfer coefficient for the flow of air. [W/m2·°C] B) Determine the...
A) Determine the convection
heat transfer coefficient for the flow of air.
[W/m2·°C]
B) Determine the convection heat transfer coefficient for water.
[W/m2·°C]
The velocity of the fluid is 9 m/s in an 8-cm diameter and 7-m-long tube when the tube is subjected to uniform heat flux from all surfaces. Use fluid properties at 25°C. Water or Air D 8 cm L=7 m Given: The properties of air at 25°C are: k 0.02551 W/m."C v 1.562 10-5 m2/s Pr =...
Problem : A cryogenic flui d is flowing in a 304 SS pipe. The pipe is...
Problem
:
A cryogenic flui
d is flowing in a
304 SS
pipe.
The pipe is insulated
on its outside surface
with
6
-
mm thick,
evacuated,
aluminum foil/glass mat insulation.
(“Evacuated” means a partial vacuum is drawn on the
insulation to
remove air that would otherwise fill
pores inside the insulation.)
The pipe
inside diameter
is 127 mm; it’s outside diameter is 138 mm.
The
fluid temperature is
-
173
o
C
.
T
he
air temperature
outside the...
2). A hydrocarbon fluid is to be cooled from 90 to 15 C at a rate...
2). A hydrocarbon fluid is to be cooled from 90 to 15 C at a rate of 9.72 ton per hr. pass shell and tube heat exchanger with the following specification is available A single- Number of tubes 250 1.0 m 23.5 mm 25 mm 15 W m- K-I Tube length Internal tube diameter External tube diameter Thermal conductivity of tube wall Chilled water is supplied at 4C and is normally discharged at 10 C. From experience it is assumed...
6. Problem 3 (20 points): A Steam in a heating system flows through tubes whose outer diameter is 3 cm and whose walls are maintained at a temperature of 120°C. Circular aluminum alloy fins (k = 180 W/m.) of outer diameter 6 cm and constant thickness t 2 mm are attached to the tube, as shown in the figure below. The space between the fins is 3 mm, and thus there are 200 fins per meter length of the tube....
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate per unit length of the tube due to free convection. 2) Air at -10°C flows at 10 m/s over the roof plate of two 5m length rooms whose air is at Too-200C. The roof plate is 0.20-m thick concrete (k = 0.6 w/ m. K)....
Water enters a 20-mm tube at 27°C with a flow rate of 450 kg/h. The rate of heat transfer from the tube wall to the fluid is given as q5'(W/m) - a x, where the coefficient a is 20 W/m2 and x (m) is the axial distance from the tube entrance. (a) Beginning with a properly defined differential control volume in the tube, derive an expression for the temperature distribution T m(x) of the water. Use this expression to determine...
Q5 A process fluid is flowing with a velocity of 4 m/s in a steel pipe having a diameter of 187 mm and a length of 1 m and maintaining the pipe surface temperature of 96.C. The fluid is entering the pipe at a temperature of 25 C and leaving with a temperature of 76C, take Prandtl number as 12. The density and viscosity of the fluid are 1210 kg/m?, 1 x10Ns/m respectively and its thermal conductivity is 5x102 w/mk....
Water flows through a 0.5 mm thick tube ( thermal conductivity of 16 W/m..C) with a inner diameter of 1.5 cm at 70°C such that the convective heat transfer coefficient is 3500 W/m² . •C. Let us consider the outside of the tube is 20oC and it loses heat by free convection with ho=7.6W/m² • •C. a. Draw the schematic diagram of the process b. Find out which one is the controlling resistance c. Calculate the overall heat-transfer coefficient per...
A) Determine the convection
heat transfer coefficient for the flow of air.
[W/m2·°C]
B) Determine the convection heat transfer coefficient for water.
[W/m2·°C]
The velocity of the fluid is 9 m/s in an 8-cm diameter and 7-m-long tube when the tube is subjected to uniform heat flux from all surfaces. Use fluid properties at 25°C. Water or Air D 8 cm L=7 m Given: The properties of air at 25°C are: k 0.02551 W/m."C v 1.562 10-5 m2/s Pr =...
Problem
:
A cryogenic flui
d is flowing in a
304 SS
pipe.
The pipe is insulated
on its outside surface
with
6
-
mm thick,
evacuated,
aluminum foil/glass mat insulation.
(“Evacuated” means a partial vacuum is drawn on the
insulation to
remove air that would otherwise fill
pores inside the insulation.)
The pipe
inside diameter
is 127 mm; it’s outside diameter is 138 mm.
The
fluid temperature is
-
173
o
C
.
T
he
air temperature
outside the...
2). A hydrocarbon fluid is to be cooled from 90 to 15 C at a rate of 9.72 ton per hr. pass shell and tube heat exchanger with the following specification is available A single- Number of tubes 250 1.0 m 23.5 mm 25 mm 15 W m- K-I Tube length Internal tube diameter External tube diameter Thermal conductivity of tube wall Chilled water is supplied at 4C and is normally discharged at 10 C. From experience it is assumed...
Most questions answered within 3 hours.
-
R2.84: There are 2 defective products in a production lot of 10.
An inspector randomly selected...
asked 45 minutes ago -
Consider the following equilibrium system: COCl2(g) CO(g) +
Cl2(g) A 10.00 L evacuated flask is filled...
asked 1 hour ago -
1) What are the two distinct steps that one needs to perform
when developing a data...
asked 1 hour ago -
2) Write a C++ program that uses a class called “Degree” to
obtain the trigonometric
values...
asked 2 hours ago -
1. In eukaryotic cells the genomes of
&
asked 2 hours ago -
The standard enthalpy of propanol (C3H7OH) is -303.0 kJ/mol.
Compute both of the
gross and net...
asked 2 hours ago -
Why PWM using H-bridge for control motor speed is more power
effiecient than the linear amplifier...
asked 2 hours ago -
In 1999, Carly Fiorina famously said,"I hope that we are at a
point that everyone is...
asked 2 hours ago -
Individuals in a species of moth vary in wing color from white to
black, but all...
asked 2 hours ago -
The following standards for variable manufacturing overhead have
been established for a company that makes only...
asked 3 hours ago -
The United States government wanted to determine what proportion
of Americans approve of the current president,...
asked 3 hours ago -
2-N stone is dropped from the top of a cliff. The stone hits the
ground 3...
asked 3 hours ago