A torque of magnitude 7-9.5 kNm is applied to the end of a tonk containing compressed...
A torque of magnitude T = 10 kN·m is applied to the end of a tank containing compressed air under a pressure of 8 MPa. Knowing that the tank has a 180-mm inner diameter and a 12-mm wall thickness, determine the maximum normal stress and the maximum shearing stress in the tank. (Round the final answers to one decimal place.) The maximum normal stress in the tank is MPa. The maximum shearing stress in the tank is MPa.
Problem 4. A torque of magnitude T = 10 kN·m is applied to the end of a tank containing compressed air under a pressure of 8 MPa. Knowing that the tank has an average diameter of 192-mm and a wall thickness of 12-mm, determine the principal stresses and the maximum shearing stress at some pointed located on the inner surface of the tank. (Note: assume σ, = 0)
Question 2 10 pts A torque of magnitude T 12.0 kN.m is applied to the end of a tank containing compressed air under pressure of 8 MPa. Knowing that the tank has a 176 mm inner diameter and a 13 mm wall thickness, draw a Mohr's circle for the stress state and determine the maximum normal stress in the tank. 15 pts Question 3 mm Esc 10 pts Question 5 A Taking into account only the effect of normal stress,...
air under a pressure to 16 MPa. The tank has a 180 mm inner diameter and a 12 mm wall thickness (40 points) A torque of magnitude T-24kN-m is applied to the end of a tank containing 3. Part A. For a point on the outer surface of the tank, determine: a. the maximum normal stress b. the maximum shearing stress Part B. As a result of several tensile tests, it has been found that the tensile yield strength for...
P B A pressurized cylindrical air tank is subjected to a force P at a collar B. The tank has an inner diameter (d = 160 mm) with wall thickness (1 = 6 mm). The gage pressure inside the tank is p = 5 MPa and the applied force is P = 9.5 kN. (a) Determine the maximum tensile stress o [MPa), maximum compressive stress oc [MPa] and maximum shear stress imax [MPa) at point a. (b) Repeat part (a)...
P Problem 3 (30 pts): Combined Loading A pressurized cylindrical air tank is subjected to a force P at a collar B. The tank has an inner diameter (d= 160 mm) with wall thickness (t = 6 mm). The gage pressure inside the tank is p = 5 MPa and the applied force is P=9.5 kN. B 450 mm (a) Determine the maximum tensile stress 0 [MPa], maximum compressive stress oc [MPa] and maximum shear stress Tmax [MPa] at point...
P B Problem 3 (30 pts): Combined Loading A pressurized cylindrical air tank is subjected to a force Pat a collar B. The tank has an inner diameter (d = 160 mm) with wall thickness (t = 6 mm). The gage pressure inside the tank is p = 5 MPa and the applied force is P=9.5 kN. (a) Determine the maximum tensile stress o [MPa], maximum compressive stress oc [MPa] and maximum shear stress Tmax [MPa] at point a. (b)...
75 mm 30 mm D A torque of magnitude T is applied to shaft AB of the gear train shown. Knowing that the allowable shearing stress is Talow in each of the three solid shafts, determine the required diameter of (a) shaft AB. (b) shaft CD. C) shaft EF. T B 60 mm 25 mm T= 122 N'm TAllow 61 MPa Determine the torque in shaft CD in Nºm- [Select) Determine the torque in shaft EF in Nm = [Select)...
Question 6.102 A spherical pressure vessel of ... TRANSF PROBLEMS 6.100 Determine the normal stress in a basketball of 12-in. diameter and 0.1-in. wall thickness which has been inflated to a gage pressure of 15 psi. 6.101 A spherical gas container made of steel is 20 ft in diameter and has a uniform wall thickness of 16 in. Knowing that the internal pressure is 75 psi, deter mine the maximum normal stress and the maximum shearing stress in the con...
A cylindrical tank holding oxygen at 4000 kPa pressure has an outside diameter of 500 mm and a wall thickness of 10 mm. It has been determined that a critical point on the tank is subjected to the tensile stress of 464 MPa in x-direction, compressive stress of 340 MPa in y-direction and shearing stress of 600 MPa. By using Mohr’s Circle; Sketch the plane stresses element for the critical point. Determine the principal stresses and their locations. Determine the...