HELP ME URGENT! Your father installed a pump to draw water from a well to your...
HELP ME URGENT! Your father installed a pump to draw water from a well to your house water tank. The desired discharge is 70 L/s. He bought a pump (Pump 1) which delivers 2 kW of power to the water from a nearby hardware store. a) Evaluate whether the pump is adequate to deliver the desired flow rate to your house or not. b) Based on your evaluation, IF the pump is not sufficient to draw 70 L/s, propose a...
HELP ME URGENT! Your father installed a pump to draw water from a well to your house water tank. The desired discharge is 70 L/s. He bought a pump (Pump 1) which delivers 2 kW of power to the water from a nearby hardware store. a) Suggest the most suitable pump if you were to increase/ decrease the current discharge. Refer to Table 1 for the other options of pumps that are available in the hardware store. Explain and justify...
HELP ME URGENT! Your father installed a pump to draw water from a well to your house water tank. The desired discharge is 70 L/s. He bought a pump (Pump 1) which delivers 2 kW of power to the water from a nearby hardware store. a) Based on your evaluation, IF the pump is not sufficient to draw 70 L/s, propose a solution to solve the issue. Nozzle diameter = 10 cm Pump 1 Pipe diameter = 30 cm 20...
Your father installed a pump to draw water from a well to your house water tank. The desired discharge is 70 Ls. He bought a pump (Pump 1) which delivers 2 kW of power to the water from a nearby hardware store. a) Evaluate whether the pump is adequate to deliver the desired flow rate to your house or not. b) Based on your evaluation, IF the pump is not sufficient to draw 70 Ls, propose a solution to solve...
Read the question carefully and answer Your father installed a pump to draw water from a well to your house water tank. The desired discharge is 70 L/s. He bought a pump (Pump 1) which delivers 2 kW of power to the water from a nearby hardware store. Evaluate whether the pump is adequate to deliver the desired now rate to your house or not b) Based on your evaluation. If the pump is not sumicient to draw 70 LS,...
Q4. A pump draws water from a large reservoir and delivers it to another reservoir whose water surface is 10 m higher than the pump centreline and that the pump is 1.5 meter above the suction reservoir. The total suction and deliver pipe used is 21.1 m in length, 9 cm in diameter and has a Darcy friction factor f0.0339. The pump operates at 750 rpm and its characteristic performances are given in table below: Q (m3 s H (m)15...
A water supply system draws from a river at an elevation of 800-feet and delivers the water to a storage reservoir at elevation 820-feet. The supply pipeline is a 1000-foot long, 10-inch diameter, cast iron pipe. A single pump with the pump characteristic curve in Figure 1 is used to fill the reservoir. Determine: a) Sketch the system described in the problem statement. b) Inlet and outlet minor loss coefficients, cite your source of minor loss coefficients. c) The roughness...
1. You are designing a pumping station and have been asked to size and select a pump from 2 models. The system step is as follows: the discharge line is a 21-inch diameter PVC pipe with an assumed constant friction factor of f 0.014. The length of the piping is 2300 ft with an elevation gain of 40 ft and an exit loss (K-1.0).. The pump station is located near sea level and the temperature of the flow stream is...
you can skip task 1 (3) because its a code in
matlab.
Task 1: You were asked to check up the status of the water system. Water at 24 °C is to be pumped from a Lower reservoir with 100 m elevation to another reservoir at a higher elevation 112 m through 150-m-long pipe as shown in Figure (1). The pipe is made of steel, and the diameter ofthe pipe is equal to 30 cm water is to be pumped...
(100 points) Water at 25°C is pumped at a rate of 0.075m'/s from a reservoir 20m above a pump to a free discharge (this means discharged to atmosphere) 35m above the pump. The pressure on the intake side of the pump is 150kPa and the pressure on the discharge side of the pump is 450kPa. The pipe between the reservoir and the pump is 3 meters of 5in diameter cast iron. From the pump to the discharge the pipe is...