Will thumbs up if completed! Please show clear work and images.
Frequency= 60Hz
Will thumbs up if completed! Please show clear work and images. Frequency= 60Hz 50 Points 1...
50 Points 1- A balanced delta connected load of 15 + j18 per phase is connected at the end of a three-phase line as shown in Figure 1. The line impedance is 1 + 12 12 per phase. The line is supplied from a three-phase source with a line-to-line voltage of 207.85 V rms. Taking the phase voltage Van as reference, determine: a) Current in phase a. b) Total complex power supplied from the source. c) Total complex powers of...
1- A balanced delta connected load of 15 + j18 12 per phase is connected at the end of a three-phase line as shown in Figure 1. The line impedance is 1 + j2 12 per phase. The line is supplied from a three-phase source with a line-to-line voltage of 207.85 V rms. Taking the phase voltage Van as reference, determine: a) Current in phase a. b) Total complex power supplied from the source. c) Total complex powers of the...
A balanced delta connected load of 15+?18 Ω per phase is connected at the end of a three-phase line as shown in Figure 1. The line impedance is 1+?2 Ω per phase. The line is supplied from a three-phase source with a line-to-line voltage of 207.85 V rms. Taking the phase voltage ??? as reference, determine: 1. Total complex powers of the line and the load. 2.A delta connected capacitor bank is connected in parallel with the load to improve...
I. A balanced three-phase positive sequence wye-connected 60Hz source voltage has line-neutral voltage of V, 1000 V. It is connected to a three- phase wye connected load whose impedance is z 50+j37.7 2 a. Find line currents ia ib, ic and line-line voltages Vab, Vbo Vac b. Find the total complex power delivered to the load. c. Find delta-connected capacitor bank needed to bring the PF to 0.95 (lagging) of system. d. Re-calculate currents la, ib, io with Case c....
I. A balanced three-phase positive sequence wye-connected 60Hz source voltage has line-neutral voltage of V, 1000 V. It is connected to a three- phase wye connected load whose impedance is z 50+j37.7 2 a. Find line currents ia ib, ic and line-line voltages Vab, Vbo Vac b. Find the total complex power delivered to the load. c. Find delta-connected capacitor bank needed to bring the PF to 0.95 (lagging) of system. d. Re-calculate currents la, ib, io with Case c....
1. (50 Points) angle phase voltage source supplies an RL load connected in parallel configuration throu given below: Load: R 500 and X j50 Ω. The voltage across the load is 20 kV. wire impedance : 2.5 +j20 Ω. Answer the following questions: (a) Represent the circuit in phasor domain. (b) Calculate the phasor current through the wire. (c) Calculate the voltage across the source. (d) Calculate the phasor current through the load resistance. (e) Calculate the complex power supplied...
Problem #1 25 points A balanced three phase 230 V (line to line), 60 Hz source supplying 800 W to a Y connected load at a power factor of O.7 lagging. Three equal capacitors connected in Y are placed in parallel with the load to improve the power factor. What must be the size of the to yield power factor to unity? What would be required capacitor size if the caps are in delta connected.? Calculate total watt supplied by...
A balanced three-phase delta-connected load is connected to a balanced three-phase delta-connected source via a transmission line. The line-line voltage for the source is 100∟0° V/phase and the impedance of load is (27 + j18) Ω/phase. The transmission line has an impedance of (1 + j4) Ω/line. a) Draw the complete schematic of the power system showing the location of wattmeters. (Two-Wattmeter system is considered for this problem). Phase “a” could be considered as a reference phase. b) What must...
10. Two loads connected in parallel draw a total of 2.4 kW at 0.8 pflagging from a 120-V rms, 60- Hz line. One load absorbs 1.5 kW at a 0.707 pf lagging. Determine: (a) the pf of the second load, INV 11. Calculate the line currents for the system shown in figure. Calculate also the total power and reactive power consumed by the load. w 12. For the balanced three-phase circuit in Fig.. Calculate the line currents, the phase voltage...
Problem 1 A balanced three-phase source supplies two loads, as shown in Fig. 1. The voltage rating of the 3-phase source is 6600230° V. Load 1 impedance is 2 =45.9+j572 per phase, Load 2 impedance is Zz=12+j252 per phase. The loads are connected to the source by a 3-phase line with the impedance of ZLine=2.7+j52 per phase. Zine Load 1 a Load 2 a la Z Z Z2 VL Zino Z2 b с 22 с Zine b Fig. 1 Balanced...