a closed horizontal cylindrical tank 1.5m in diameter and 4 m long and filled with a...
a closed horizontal cylindrical tank 1.5m in diameter and 4 m long and filled with a gasoline, of specific gravity 0.2 and accelerated horizontally at 3m/s2, find the total force acting on the front wall and rear wall
Homework Answers
Add Answer to:
a closed horizontal cylindrical tank 1.5m in diameter and 4 m
long and filled with a...
An open tank 10m long by 1.5m wide by 1.5m deep is filled with oil (s...
An open tank 10m long by 1.5m wide by 1.5m deep is filled with oil (s = 0.80) to a depth of 1.20m. It is accelerated uniformly from rest to 15 m /sec. What is the shortest time in which the tank maybe accelerated without spilling any oil?
A closed tank is filled with water and has a 4-ft-diameter hemispherical dome as shown in...
A closed tank is filled with water and has a 4-ft-diameter
hemispherical dome as shown in the figure below. A U-tube manometer
is connected to the tank. Determine the vertical force of the water
on the dome if the differential manometer reading is 7 ft and the
air pressure at the upper end of the manometer is 13.6 psi.
Setting up the manometer equation, I found the pressure in the
closed tank to be 2894.4 lb/ft^2, but when doing the...
2. A cylindrical tank weighs 75 N when empty. When filled with water the total weight...
2. A cylindrical tank weighs 75 N when empty. When filled with water the total weight is 1600 N. Determine the height of the tank if the diameter is 50 cm. 3. The mass of the golf ball is 46 g and its mean diameter is 42 mm. Determine the density and specific gravity of the material used for golf ball.
The figure shows a cylindrical tank of 80 em in diameter which is fully filled with water. In order to increase the flow from the tank to the exit pipe on the left, an additional pressure is appl...
The figure shows a cylindrical tank of 80 em in diameter which is fully filled with water. In order to increase the flow from the tank to the exit pipe on the left, an additional pressure is applied to the water surface by an air compressor to supply air to the upper air chamber of the tank. The external walls of the tank are exposed to the atmospheric conditions of the area. You are required to determine the hydrostatic conditions...
A closed tank is filled with water and has a 4-ft-diameter hemispherical dome as shown in...
A closed tank is filled with water and has a 4-ft-diameter
hemispherical dome as shown in Fig. P2.129. A U-tube manometer is
connected to the tank. Determine the vertical force of the water on
the dome if the differential manometer reading is 7 ft and the air
pressure at the upper end of the manometer is 13.4 psi.
QUESTION 4 A cylindrical tank 3 m in diameter with the with axis vertical, has an...
QUESTION 4 A cylindrical tank 3 m in diameter with the with axis vertical, has an inflow line of 0.1 m inside diameter and an outflow line 0.2 m inside diameter. Water is flowing in the inflow line at velocity of 2 m/s and leaving by the outflow line at a velocity of 1 m/s. Is the level in the tank rising or falling? How fast? [10]
1. A 4-ft diameter open cylindrical tank, 6 ft high, is filled with water. The tank...
1. A 4-ft diameter open cylindrical tank, 6 ft high, is filled with water. The tank is tilted to a position such that its water surface will cut the diameter of the base. Calculate the volume of water left in the tank. a. 16 cu. ft c. 13 cu. ft b. 18 cu.ft d. 14 cu. ft Americana A Crans-
A cylindrical gate (3/4 cylinder) 1 ? in diameter and 2 ? long separates 3 compartments...
A cylindrical gate (3/4 cylinder) 1 ? in diameter and 2 ? long
separates 3 compartments containing 3 different fluids.
Determine:
a) The resulting horizontal force (??).
b) The resulting vertical force (??).
子 DR =1 DR = 1.2 时 3m DR=0.8
A cylindrical container, 1 meter long and 1 meter in radius, is placed on horizontally on its side and filled halfway wi...
A cylindrical container, 1 meter long and 1 meter in radius, is placed on horizontally on its side and filled halfway with water. a) Calculate the horizontal component of the force acting on the cylindrical side-walls? b) Calculate the force acting on each round end? Then we are given the integral solutions of integral h *sqrt(1-h^2)dh = -1/3(1-h^2)^3/2 and integral sin(x)cos(x)dx = -1/2*cos^2 (x) to help out with the problem.
A circular gate with diameter 4 m lies in a vertical plate of a tank filed...
A circular gate with diameter 4 m lies in a vertical plate of a tank filed with oil of specific gravity 0.8. The oil surface is 8 m above the top of the gate. Find the force exerted by the oil on the gate and the position of the center of pressure.
A closed tank is filled with water and has a 4-ft-diameter
hemispherical dome as shown in the figure below. A U-tube manometer
is connected to the tank. Determine the vertical force of the water
on the dome if the differential manometer reading is 7 ft and the
air pressure at the upper end of the manometer is 13.6 psi.
Setting up the manometer equation, I found the pressure in the
closed tank to be 2894.4 lb/ft^2, but when doing the...
The figure shows a cylindrical tank of 80 em in diameter which is fully filled with water. In order to increase the flow from the tank to the exit pipe on the left, an additional pressure is applied to the water surface by an air compressor to supply air to the upper air chamber of the tank. The external walls of the tank are exposed to the atmospheric conditions of the area. You are required to determine the hydrostatic conditions...
A closed tank is filled with water and has a 4-ft-diameter
hemispherical dome as shown in Fig. P2.129. A U-tube manometer is
connected to the tank. Determine the vertical force of the water on
the dome if the differential manometer reading is 7 ft and the air
pressure at the upper end of the manometer is 13.4 psi.
QUESTION 4 A cylindrical tank 3 m in diameter with the with axis vertical, has an inflow line of 0.1 m inside diameter and an outflow line 0.2 m inside diameter. Water is flowing in the inflow line at velocity of 2 m/s and leaving by the outflow line at a velocity of 1 m/s. Is the level in the tank rising or falling? How fast? [10]
1. A 4-ft diameter open cylindrical tank, 6 ft high, is filled with water. The tank is tilted to a position such that its water surface will cut the diameter of the base. Calculate the volume of water left in the tank. a. 16 cu. ft c. 13 cu. ft b. 18 cu.ft d. 14 cu. ft Americana A Crans-
A cylindrical gate (3/4 cylinder) 1 ? in diameter and 2 ? long
separates 3 compartments containing 3 different fluids.
Determine:
a) The resulting horizontal force (??).
b) The resulting vertical force (??).
子 DR =1 DR = 1.2 时 3m DR=0.8
Most questions answered within 3 hours.
-
The correct answer will be upvoted with positive feedback,
giving me incorrect answers will result in...
asked 7 minutes ago -
Question:
Evaluation: Answer both (a) and (b): (a) Looking at
Table 6.1 in our text, explain...
asked 16 minutes ago -
What is the maximum number of edges that a graph on 7 vertices can
have if...
asked 37 minutes ago -
Question 05
(a) i) What are the three type of general defects in welding?
ii) Explain...
asked 22 minutes ago -
If the wage rate increases from $12 to $16 and, as a result, the
quantity demanded...
asked 27 minutes ago -
the slime layer external to the prokaryotic cell wall is called
the ?
asked 36 minutes ago -
Cheyenne Company must decide whether to make or buy some of its
components. The costs of...
asked 38 minutes ago -
What is the entropy change for mixing 1 liter of a monoatomic
ideal gas (call it...
asked 36 minutes ago -
A company that has 150 employees chooses a committee of 11 to
represent employee retirement issues....
asked 58 minutes ago -
the
force between two 2.11 x 10^-4 C charges that are 2.11 meters apart
is ______N?
asked 1 hour ago -
A truck of mass m slows from speed v0 to speed v in a
time t....
asked 59 minutes ago -
A 60kg box rests on a floor with a coefficient of kinetic
friction of 0.600 and...
asked 56 minutes ago