QUESTION 3 Air at atmospheric pressure flows with an inlet velocity of 1 m/s across a...
please answer this as soon as possible 1) Air at 15.6°C and 1 atm abs flows across a bank tube consisting of total 10 tubes of 30-mm outside diameter in a staggered manner consisting of 3 transverse rows in the direction of flow and 4 rows normal to the flow as exactly shown in the below picture. The velocity of the air as approaching the bank of the tubes is 5 m/s. The tube surfaces are maintained at 50°C. The...
Air at 1 atm and 10°C flows across a bank of tubes 15 rows high and 5 rows deep at a velocity of 17 m/s entering the in-line array. The tubes have a 1.25 inch outer diameter and all tube surfaces of the tubes are all maintained at 220°C. The tube bank is arranged in-line such that the spacing in both the flow normal and parallel directions are each 1.875 inches. Find the total heat transferred per unit length for...
An aligned tube bank is constructed of 2.5-cm-diameter tubes with 15 rows of tubes with 7 tubes in each row. The tubes are maintained at 90°C, and atmospheric air is blown across them at 20°C and u00-12 m/s. The arrangement has S 3.75 cm and SL = 5.0 cm. Calculate (a) the heat transfer from the tube bank per meter of length, and (b) the air- side pressure dropkP An aligned tube bank is constructed of 2.5-cm-diameter tubes with 15...
1 points QUESTION 13 Air is to be heated by passing it over a bank of 3-m-long tubes inside which steam is condensing at 100 C. Air approaches the tube bank in the normal drection at 20 C and 1 atm with a mean velocity of 5.2 m/s. The outer diameter of the tubes is 1.6 cm, and the tubes are arranged staggered with longitudinal and transverse pitches of SL ST 4 cm. There are 20 ows in the flow...
Qi. A flat plate of width 1 m and length 0.2m is maintained at a temperature of 32°C. Ambient fluid at 22"C fBlows across the top of the plate in parallel flow. Determine the average heat transfer coefficient, the convection heat transfer rate from the top of the plate, and the drag force on the plate for the following: (a) The Buid is water flowing at a velocity of 0.5 m/s. o) Water is flowing at a velocity of 2.5...
Case Study 2 Convection) – 30 Marks Consider an air duct heater consists of electrical heating elements with an aligned arrangement and the longitudinal (5) and transverse pitches (S.) of 5 = 5, = 22 mm. There are 3 rows of elements in the flow direction (N = 3) and 3 elements in each row (N = 3). The atmospheric air at a velocity of V = 10 m/s, and a temperature of. = 15°C enter the duct and flow...
Problem 7.075 An air-cooled steam condenser is operated with air in cross flow over a square, in-line array of 400 tubes (NL = NT = 20), with an outside tube diameter of 20 mm and longitudinal and transverse pitches of SL = 60 mm and ST-42 mm, respectively. Saturated steam at a pressure of 2.455 bars enters the tubes, and a uniform tube outer surface temperature of Ts - 390 K may be assumed to be maintained as condensation occurs...
T,= 75 °C T= 25°C V = 10 m/s Air 3. (25 pts) Atmospheric air at 25 °C flows across a long pipe at a uniform velocity of 10 m/s. The pipe has an external diameter of 120 mm and its surface temperature is maintained at 75 °C. Determine the rate of heat transfer per unit length of the pipe and the drag force exerted per unit length of the pipe. Hint: You can use the information on the next...
Tube bank uses an aligned arrangement of 10-mmdiameter tubes with ST-Si-20 mm. There are 10 rows of tubes with 50 tubes in each row. Consider an application for which cold water flows through the tubes, maintaining the outer surface temperature at 27°C, while flue gases at 427°C and a velocity of 5 m/s are in cross flow over the tubes. The properties of the flue gas may be approximated as those of atmospheric air at 427°C. Using Zukauskas correlation determine...
Air at atmospheric pressure and temperature of 565 C flows with velocity of 0915 m/sec along a flat plate which is kept at a uniform temperature of 121.1 C. Determine the local heat transfer coefficient hk) at a distance of 0,61 meter from the leading edge of the plate and the total heat transfer coefficient hm over the length of x 0 to x= 0.61m peer feet of plate width. Air at average temperature has Pr 0.62, k-0.0313 W/m. C...