Homework Answers
Add Answer to:
A shunt connected DC motor has independent control over armature and field c The motor ratings...
A 220 V DC shunt motor has an armature resistance, Re-0.1 S2, a field resistance, Ry=100...
A 220 V DC shunt motor has an armature resistance, Re-0.1 S2, a field resistance, Ry=100 12, and negligible rotational losses. Under certain load conditions, the shunt motor runs at 1600 rpm while drawing a total current, I = 100 A. Determine: a. the output power of the motor; b. the output torque in N-m; and, c. the efficiency Without making any changes to the applied voltage or the field, the motor operates with a new M mechanical load that...
Problem 3: DC machine A shunt DC motor rated at V,'. 300 V, with field resistance...
Problem 3: DC machine A shunt DC motor rated at V,'. 300 V, with field resistance of Rf 600 0, armature 0.2 , resistance of R, 30.5 A (total current) when rated-load at n, consumes 916.8 rpm. Armature rotational loss (consisting of fan, friction and core loss (consisting of field resistance, armature a) Find Prot (rotational load), Pshaft and efficiency at rated load. - Assume that the rotational loss is constant and P,aft is now 50% in the case of...
3. A 20kW, 250V, 1000rpm shunt excited dc motor has armature and field resistances of 0.2...
3. A 20kW, 250V, 1000rpm shunt excited dc motor has armature and field resistances of 0.2 ohm and 2002. When the motor takes 80A rated current at rated conditions. Draw the equivalent circuit and calculate induced torque at 1200rpm. Explain the starting current limiting methods for DC motors. (30 pts) 4. Explain the conditions for parallel operation of synchronous generators. A three phase, wye connected, synchronous generator is rated 150 MW, 0.85 lagging power factor, 12.6 kV, 60 Hz, and...
A 250-V shunt-connected DC motor runs at 1500 rpm when it is not connected to any...
A 250-V shunt-connected DC motor runs at 1500 rpm when it is not connected to any external load. When the motor is connected to an external load, it draws a line current of 40A. The motor has an armature resistance of 1 ? and a field circuit resistance of 100 ?. Assume that the rotational loss torque is 2 Nm and is independent of the speed (a) Find the line current of the motor when there is no external load....
A DC Motor 24 of 25 > Part A A shunt-wound DC motor with the field...
A DC Motor 24 of 25 > Part A A shunt-wound DC motor with the field coils and rotor connected in parallel (see the figure) (Figure 1)operates from a 135 V DC power line. The resistance of the field windings, Rf, is 203 2. The resistance of the rotor, R is 5.60 ? , when the motor is running, the rotor develops an emf E. The motor draws a current of 4.90 A from the line. Friction losses amount to...
1. A 300 V compound motor has armature resistance 0.18 Ω, series field resistance 0.3 Ω...
1. A 300 V compound motor has armature resistance 0.18 Ω, series field resistance 0.3 Ω and shunt field resistance 100 Ω. The rotational losses are 200 W. On full load the line current is 25 A and the motor runs at 1800 rpm. Determine: (i) the developed mechanical power (ii) the output power (iii) the output torque (iv) the efficiency at full load 2. A 120 V series motor has 0.2 Ω field resistance. On full load, the line...
A shunt motor has an armature resistance of 0.25 W. The motor takes 125 A from...
A shunt motor has an armature resistance of 0.25 W. The motor takes 125 A from a 400 V supply and runs at 1000 rpm. If the total torque developed remains unchanged, calculate the speed and armature current if the magnetic field is reduced to 80% of the initial value.
A) The input current to a 220 V, short-shunt compound motor at no load is 6 A. The shunt- field c...
a) The input current to a 220 V, short-shunt compound motor at no load is 6 A. The shunt- field circuit resistance is 220 Ω; the armature resistance is 0.112, and the series-field resistance is 0.1 Ω, what is the stray power loss ? (b) Assume the input rating of the motor in Part (a) to be 66 A at 220 V with a no-load speed of 1000 rpm. If the stray power loss varies as the counter-electromotive force and...
A shunt-wound DC motor with the field coils and rotor connected in parallel (see the figure)...
A shunt-wound DC motor with the field coils and rotor connected
in parallel (see the figure) (Figure 1) operates from a 130 V DC
power line. The resistance of the field windings, Rf, is
234 ? . The resistance of the rotor, Rr, is 4.10 ? . When
the motor is running, the rotor develops an emf E. The motor draws
a current of 4.82 A from the line. Friction losses amount to 47.0 W
.
A d.c shunt motor has armature and field resistance of 0.2 Ω and 110 Ω respectively....
A d.c shunt motor has armature and field resistance of 0.2 Ω and 110 Ω respectively. The motor is running at 1200 rpm and drawing 15 A from 110 V supply. If the field resistance is decreased by 10%, calculate the new steady state armature current and speed of the motor. Assume the load torque to be constant
A 220 V DC shunt motor has an armature resistance, Re-0.1 S2, a field resistance, Ry=100 12, and negligible rotational losses. Under certain load conditions, the shunt motor runs at 1600 rpm while drawing a total current, I = 100 A. Determine: a. the output power of the motor; b. the output torque in N-m; and, c. the efficiency Without making any changes to the applied voltage or the field, the motor operates with a new M mechanical load that...
Problem 3: DC machine A shunt DC motor rated at V,'. 300 V, with field resistance of Rf 600 0, armature 0.2 , resistance of R, 30.5 A (total current) when rated-load at n, consumes 916.8 rpm. Armature rotational loss (consisting of fan, friction and core loss (consisting of field resistance, armature a) Find Prot (rotational load), Pshaft and efficiency at rated load. - Assume that the rotational loss is constant and P,aft is now 50% in the case of...
3. A 20kW, 250V, 1000rpm shunt excited dc motor has armature and field resistances of 0.2 ohm and 2002. When the motor takes 80A rated current at rated conditions. Draw the equivalent circuit and calculate induced torque at 1200rpm. Explain the starting current limiting methods for DC motors. (30 pts) 4. Explain the conditions for parallel operation of synchronous generators. A three phase, wye connected, synchronous generator is rated 150 MW, 0.85 lagging power factor, 12.6 kV, 60 Hz, and...
A 250-V shunt-connected DC motor runs at 1500 rpm when it is not connected to any external load. When the motor is connected to an external load, it draws a line current of 40A. The motor has an armature resistance of 1 ? and a field circuit resistance of 100 ?. Assume that the rotational loss torque is 2 Nm and is independent of the speed (a) Find the line current of the motor when there is no external load....
A DC Motor 24 of 25 > Part A A shunt-wound DC motor with the field coils and rotor connected in parallel (see the figure) (Figure 1)operates from a 135 V DC power line. The resistance of the field windings, Rf, is 203 2. The resistance of the rotor, R is 5.60 ? , when the motor is running, the rotor develops an emf E. The motor draws a current of 4.90 A from the line. Friction losses amount to...
a) The input current to a 220 V, short-shunt compound motor at no load is 6 A. The shunt- field circuit resistance is 220 Ω; the armature resistance is 0.112, and the series-field resistance is 0.1 Ω, what is the stray power loss ? (b) Assume the input rating of the motor in Part (a) to be 66 A at 220 V with a no-load speed of 1000 rpm. If the stray power loss varies as the counter-electromotive force and...
A shunt-wound DC motor with the field coils and rotor connected
in parallel (see the figure) (Figure 1) operates from a 130 V DC
power line. The resistance of the field windings, Rf, is
234 ? . The resistance of the rotor, Rr, is 4.10 ? . When
the motor is running, the rotor develops an emf E. The motor draws
a current of 4.82 A from the line. Friction losses amount to 47.0 W
.
Most questions answered within 3 hours.
-
the following reaction occurs in a balloon containing
N2O2 gas
N2O4(g)=2NO2(g)
will the volume of the...
asked 28 minutes ago -
answer the questions throughout this program
public class Day implements Comparable {
Private Boolean atWork;...
asked 36 minutes ago -
This is C++ code for parking fee management program
#include <iostream>
#include <iomanip>
using namespace std;...
asked 46 minutes ago -
The free energy change for the following reaction at 25 °C, when
[Sn2+] = 1.17 M...
asked 2 hours ago -
An MNE is this kind of industry when competition in one country
is essentially independent of...
asked 4 hours ago -
. For this set of questions, determine what
proportion of a normal distribution is located betweeneach...
asked 4 hours ago -
A college student is employed as a door-to-door newspaper
salesman. Historical data suggests that the student...
asked 5 hours ago -
MATLAB HW 11 problem using Switch Case and Input commands
Write a script file that calculates...
asked 5 hours ago -
Considering gravitational time dilation, calculate the time that
passes in Earth’s surface while 1 hour passes...
asked 5 hours ago -
Minitab Problem: Take the Lake Hume June rainfall data and find
use the processes outlined in...
asked 6 hours ago -
X Company is trying to decide whether to continue using old
equipment to make Product A...
asked 6 hours ago -
IN PYTHON ONLY !! Program 2: Re-work
program #5 (WeeklyHours) from the previous assignment such that...
asked 7 hours ago