heat flows in to the water
heat flowed will increase the temperature
heat required to raise the temperature = Q
=m*sW*dT
Q = 0.225*4190*(28- 21.7 kJ <-----answer
option C <----answeer
4. As you sit on the porch. your 0.225 kg of cold water warms from 5...
Cold water with properties as shown in Table 4 flows at rate of 4 kg/s is heated from 28 oC to 54 oC in a shell-and-tube heat exchanger as shown in Figure 4.The cold water inters the tubes through thin-walled tubes, each tube has diameter of 19 mm, and the average velocity inside each tube is 0.355 m /s. The shell side, one pass is used with hot water as the heating fluid 1.8 kg/s entering the exchanger at 93...
You pour 210 g hot coffee at 78.7 degree C and some cold cream at 7.50 degree C to a 115-g cup that is initially at a temperature of 22.0 degree C. The cup, coffee, and cream reach an equilibrium temperature of 63.0 degree C. The material of the cup has a specific heat of 0.2604 kcal/(kg middot degree C) and the specific heat of both the coffee and cream is 1.00 kcal/(kg middot C). If no heat is lost...
3. Water has the specific heat 4.186 kJ/kg. °C, a boiling point of 100°C, and a heat of vaporization of 2260 kJ/kg. A sealed beaker contains 100 g of water that's initially at 20°C. If the water absorbs 100 kJ of heat, what will its final temperature be? (A) 100°C (B) 119°C (C) 143°C (D) 183°C (E) 239°C 4. On a cold winter day (5°C), the founda- tion block for a statue is filled with 2.0 m of concrete. By...
A person decides to loose weight by eating only cold food. A 1 kg piece of apple pie yields 1500 kJ of energy when eaten. It its specific heat is 1.7 kJ/kg °C, how much less energy is its energy component at 25°C than at 100°C? Please show work.
Part II - Show your work (19 Marks] 16 Cold water (Cp = 4180 J/kg. "C) leading to a shower enters a thin-walled double-pipe counter flow heat exchanger at 15°C at a rate of 0.25 kg/s and is heated to 45°C by hot water (Cp = 4190 J/kg. "C) that enters at 100°C at a rate of 3 kg/s. If the overall heat transfer coefficient is 950 W/m2. C, determine the rate of heat transfer and the heat transfer surface...
Hot water flows thorough a parallel flow heat exchanger at a rate of 10 kg/min and is cooled by a cold water stream of flow rate 25 kg/min. The inlet temperatures of hot and cold water streams are 70 oC and 25 oC, respectively. The outlet temperature of the hot water is expected to be 50 oC. The individual convective heat transfer coefficient on both sides of the heat transfer area is 600 W/m2 .K. Take the specific heat for...
Please show work Problem-5. Warming 1 kg of water requires 4.186 kJ of energy per degree Celsius. About how many hours would it take to warm 1 L of water from 20° C to 40° C if you immerse in the water a 100 12 resistor connected across two 9.0-V batteries aligned in series?
l kg of water for a party, and only have 5 minutes to do it. Relying on nothing es, a dixicup, duct tape and a piece of string, you manage to build a refrigerator but your keen physical abiliti unit which can do the job. The temperature inside the refrigeration unit is 273 K, and the temperature outside is 350 K. Since you area brilliant UIUC student, assume that your refrigerator has the maximum possible efficiency. The Latent Heat o...
4) A container has 7.0 kg of water in it. If 263.0 k] of heat is added to the system and it does 94.0 kJ of 4) work on its surroundings, how much does its temperature change? (The specific heat of water is 4184 J/kg K.) A) 5.8 K B) 0.16 K C) 0.0058 K D) 170 K
5 kg of water substance at 1 bar, 400 K, contained in a piston-cylinder apparatus, is compressed to 10 bar, with heat transfer to a reservoir maintained at 350 K; the temperature of the water substance remains constant at 400 K. If the initial and final specific entropies of the water substance are: 7.502 kJ/kg-K and 1.600 kJ/kg-K respectively; (a)How much heat is removed? (b)What is the entropy change of the water substance? (c)What is the entropy change of the...