A sequential circuit has one input (X) and one output (Z). Draw a Mealy state graph...
Design a Mealy sequential circuit with one input X and one output Y that recognizes the sequence 1101 anywhere on the input sequence X. When the circuit recognizes the sequence it asserts its output Z high. Design the circuit with T flip flops.
Construct a state table for a sequential circuit that has a single input x and a single output z. The output z is one if and only if the received input sequence has an odd number of 1’s.
2. Design a Mealy sequential circuit with one input and one output 2 such that the output is unless the input is O following a sequence of exactly two O inpots followed by a l input. (5 strfes) sample input x: 0010010001001110010 Z: 0001 001000000000001 Derive the stute diagram and inplemert with JK FF. Draw the cinwit Use a straight binary assignmewt as in the previous problem 2. Design a Mealy sequential circuit with one input and one output 2...
9. (10%) A Mealy sequential circuit has five states; one input x, and one output y. Its state diagram is shown in the following figure. (a) (5%) Design the circuit with D flip-flops by treating the unused states as don't-care conditions. (b) (5%) Following (a), analyze the circuit obtained from the design to determine the effect of the unused states. 0/0 001 0/0 1/0 011 0/0 100 0/0 010 0/0 1/1 000
A sequential circuit has one input (X), and two outputs (S and V). X represents a 4-bit binary number N, which is input least significant bit first. S represents a 4-bit binary number equal to N+2, which is output least significant bit first. At the time the fourth input occurs, V=1 if N+2 is too large to be represented by 4 bits; otherwise V=0. The value of S should be the proper value, not a don’t care, in both cases....
1. Given the state diagram shown below for a two-state synchronous sequential Mealy circuit with input. and output z, realize the circuit using D flip-flops. Your answer must include the state transition,excita- tion, and output tables, the excitation equation(s), and a labeled circuit diagram 1/0 2. Given the state diagram in Problem 1, realize the circuit using JK flip-flops. Your answer must include the state transition, excitation, and output tables, the excitation equation(s), and a labeled circuit diagram. 3. Given...
Write a Verilog program to describe a sequential circuit that has input X and output Z. Z goes to 1 whenever the last four X inputs (in four clock cycles) are 1001 or 0110. Use a switch (SW1) on the DE1 board for X and a red LED for Z. Use a push button as the clock input. Use both the Moore and Mealy models to describe the circuit.
A sequential circuit with two D Flip-Flops and one input X and one output Y is specifed by the following input equations: Y = A'+B DA = X + B DB = XA' (a) Draw the logic diagram of the circuit (b) Derive the state table. (c) Derive the state diagram. (b) Is this a Mealy or a Moore machine?
1. A sequential circuit has one JK flip-flop A, one input x, and one output y. The flip-flop input equation and circuit output equation are: (a) Draw the logic diagram of the circuit (b) Tabulate the state table of the circuit (P. S., Input, N. S., Output). (c) Draw the state diagram. (d) Derive the state equation A(t+ 1). (e) Starting from state A 0 in the state diagram, determine the state transitions and output sequence that will be generated...
A sequential circuit has two D flip-flops, A and B, one input x and one output y. The flip-flop input functions and the output function are the folllowing: DA = Ax` + Bx DB= A`x + Bx` y = Ax + Bx a) Write the state table of the circuit b) Draw the state diagram of the circuit (note that the output changes when the input changes)