(HELP MEEE)(TURKİSH) In a pilot reactor, sulfur dioxide
is converted to sulfur trioxide using 100% excess dry air. SO2 and
air are supplied to the reactor at 450 ° C and 65% sulfur dioxide
conversion takes place, leaving the reactor at 550 ° C.
The heat energy released as a result of the reaction is considered
to be taken with water circulating on the side of the reactor. If
the inlet temperature of the water is 30 ° C and the water is
allowed to warm up to a maximum of 20 ° C, calculate the flow rate
(m3 / h) of water that should be used to produce 200 kg of sulfur
trioxide per hour.
We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
(HELP MEEE)(TURKİSH) In a pilot reactor, sulfur dioxide is converted to sulfur trioxide using 100% excess...
SO2 is oxidised to SO3 in a small pilot-plant reactor.SO2 +0.5O2 → SO3 ; ΔHr° = -99.28 kJ/mol SO2 and 100% excess air are fed to the reactor at 450°C. The reaction proceeds to a 65% SO2 conversion, and the products emerge from the reactor at 550°C. The reactor is surrounded by a water jacket into which water at 25°C is fed. SO2 feed rate is 1922 mol/min, and the air feed rate to the reactor is 9149 mol/min. The production rate of SO3...
please help me solving this step by step... thank you :) 8.25 Sulfur dioxide is converted to sulfur trioxide by oxidation over a V20, catalyst at atmospheric pressure. In the reactor configuration shown in Figure P8.25, SO2 and O2 avalable at 300°C and 25°C, respectively, are preheated to 425°C and fed in stoichiometric ratio to the reactor. Conversion is 96% and, to keep the reactor temperature from rising too much, 10 kcal/g-mol of com bined feed is removed by external...
90% of pyrite conversion was achieved with 50% of FeS2 converted to form sulfur dioxide while the rest forming sulfur trioxide. 100 kg/hr of ore was roasted with 200% theoretical air. The solid waste stream contained the unconverted pyrite, ferric oxide, and inert. The gas stream exits the furnace is cooled from 1000°C to 545°C at a constant absolute pressure of 35.0 atm in a waste-heat boiler. Determine the composition of the gas stream, the mass ratio of the solid...