7a) Consider a room in a house that has composite walls with an Rtt-1.5 m2K/W. The...
A house has a composite wall of wood (exterior) (k = 0.12 W m-1 K -1 , 20 mm thick), fibreglass insulation (k = 0.045 W m-1 K -1 , 70 mm thick) and plasterboard (interior) (k = 0.25 W m-1 K -1 , 10 mm thick). Determine the total heat loss through the wall when the inside temperature is 20 °C, the outside temperature is -10 °C, the inside heat transfer coefficient is 15 W m-2 K -1, and...
Consider a house that has a 10-m x 20-m base and a 4-m-high wall. All four walls of the house have an R-value of 2.31m2°C/W. The two 10-m x 4-m walls have no windows. The third wall has five windows made of 0.5-cm-thick glass (k = 0.78 W/m-K), 1.2m x 1.8min size. The fourth wall has the same size and number of windows, but they are double paned with a 1.5-cm-thick stagnant air space (k = 0.026 W/m-K) enclosed between...
summarizr the followung info and write them in your own words and break them into different key points. 6.5 Metering Chamber: 6.5.1 The minimum size of the metering box is governed by the metering area required to obtain a representative test area for the specimen (see 7.2) and for maintenance of reasonable test accuracy. For example, for specimens incorporating air spaces or stud spaces, the metering area shall span an integral number of spaces (see 5.5). The depth of...
summatize the following info and break them into differeng key points. write them in yojr own words apartus 6.1 Introduction—The design of a successful hot box appa- ratus is influenced by many factors. Before beginning the design of an apparatus meeting this standard, the designer shall review the discussion on the limitations and accuracy, Section 13, discussions of the energy flows in a hot box, Annex A2, the metering box wall loss flow, Annex A3, and flanking loss, Annex...