3. The quality of a two-phase liquid-vapor mixture of H20 at 408°C with a specific volume...
If you are given the pressure and specific volume of a two-phase, liquid-vapor mixture, describe the process of how you could determine the specific internal energy.
3.12 w A tank contains a two-phase liquid-vapor mixture of Refrigerant 22 at 10 bar. The mass of saturated liquid in the tank is 25 kg and the quality is 60%. Determine the volume of the tank, in mº, and the fraction of the total volume occupied by saturated vapor.
A vessel with a volume of 0.008 m3 contains a liquid-vapor mixture of refrigerant 134a at 200 kPa and a quality of 20%. Determine: a) the mass of vapor present in kg, and b) the fraction of the total volume occupied by the liquid.
what is the phase of each? Choose one among liquid,
liquid+vapor, vapor, and don't know
1. What is the phase of each? Choose one among liquid, liquid+vapor, vapor, and don't know (1) Water. T=50 °C, v=13 m3/kg (2) Water. T=100°C, v=1 m3/kg (3) Water. p=3 bar, u=500kJ/kg (4) Ammonia, p=0.9 bar, T=-30 °C ( 2. Evaluate the property at each state. If you cannot fix the state, write "don't know". (1) Specific internal energy of Water at 120 °C, 1.985...
A liquid-vapor mixture of refrigerant-134a is at -10°C with a quality of 40 percent. Determine the value of the Gibbs function, in kJ/kg. when the two phases are in equilibrium. R-134a -10°C 0.4 kJ/kg kJ/kg
At 100 ?C the vapor pressures of hexane and octane are 1836 and 354 torr, respectively. A certain liquid mixture of these two compounds has a vapor pressure of 666torr at 100 ?C. Find the mole fractions in the liquid mixture and in the vapor phase. Assume an ideal solution.
Water is contained in a closed, rigid tank, initially a two-phase liquid-vapor mixture at200°Fwith a quality of 0.3. Heat transfer occurs until the water reaches240°F. Determine the initial and final pressures, each in lbf/in.2Locate the initial and final states onsketches of thep-vandT-vdiagrams
Ignore anything
handwritten
Problem 2 (50 points) A closed rigid tank contains of a two-phase liquid-vapor mixture of water, with a mass of 1 kg quality of x,-0.75, and a pressure of pi = 40 kPa (State 1 ). The system is heated in a constant- volume process till the pressure reaches p2-100 kPa (State 2) Sa) Determine the temperature, T, in "C, specific volume, Pi in m'/kg, and specific internal energy, ul, in kJ/kg at state 1; (12.5 points)...
A rigid tank having a volume of 0.1 m3 initially contains water as a two-phase liquid-vapor mixture at 1 bar and a quality of 1%. The water is heated in two stages: Stage 1: Constant-volume heating until the pressure is 20 bar. (treat as closed system) Stage 2: Continued heating while saturated water vapor is slowly withdrawn from the tank at a constant pressure of 20 bar. (Note: Use transient analysis with all the water leaving having a quality of...
1. A saturated water liquid-vapor mixture with a total mass of 1.3 kg is contained in a piston-cylinder assembly, with the piston initially placed so that the volume of the mix- ture is 1.5 m. The initial temperature of the mixture is 30°C. The piston is then pushed inward until the volume is halved, and the container is heated until the pressure is 400 kPa. Determine Sherleader 306 V Tup V 400 kPa (a) the quality of the mixture for...