The rigid bar ABC is hinged at A and supported by steel rod at B. If...

Question

Question

The rigid bar ABC is hinged at A and supported by steel rod at B. If P = 5 kips is acting at C, determine the deflection at C

Answer 1

Answer #1

STEP I: GIVEN STEEL L-464, A=0.50 in? E-29x10psi 2ft 3ft P= 5 kips STEP I: TO FIND DEFLECTION AT C(De) = ? STEP TIL: EQUILIBR

Answer 2

Similar Homework Help Questions

1- A rigid rod ABC is hinged at A, and supported by a steel wire at...

1- A rigid rod ABC is hinged at A, and supported by a steel wire at B, and a brass wire at C. The rod ABC can rotate around the hinge at A. A force L = 13(k) is applied at the mid point of the part BC of the rigid rod. The temperature of both wires connected at B, and C is reduced by 40 °C. Both wires have a length L = 4 m and a cross-sectional area...
The 0.5-in.-diameter rod CE and the 0.75 -in.-diameter rod DF are attached to the rigid bar...

The 0.5-in.-diameter rod CE and the 0.75 -in.-diameter rod DF are attached to the rigid bar ABCD as shown. Knowing that the rods are made of aluminium and using E = 10.6 X 10 psi, determine (a) the force in each rod caused by the loading shown, (b) the corresponding deflection of point A. 12 in., 8 in. 18 in. B C D 10 kips 24 in. 30 in. E F
An axial load P is applied to the 1.35-in.-diameter steel rod AB as shown. For P-S.7...

An axial load P is applied to the 1.35-in.-diameter steel rod AB as shown. For P-S.7 kips and e -- in., determine the deflection at the midpoint C of the rod. Use E - 29 x 10 psi. 17 1.35 in diameter 3.9 ft C in. ma

Rigid bar BCD is supported by a pin at C and aluminum rod (1)

Rigid bar BCD is supported by a pin at C and aluminum rod (1). A concentrated load P is applied to the lower end of the aluminum rod (2) which is attached to the rigid bar at D. The cross sectional area of each rod is A»0.20 in2 and the elastic modulus of the aluminum material is E=9200 ksi. The coefficient of thermal expansion 12.5 x 10-6/°F. After the load P is applied and the structure has been CoOLED by...
The rigid bar ABC is supported by two links, AD and BE, of un mm rectangular...

The rigid bar ABC is supported by two links, AD and BE, of un mm rectangular cross section and made of a steel that is assumed to be elastic with E 200GPa. Knowing that a-0.8m, determine (a) the average normal stress in each link, (b) the deflection of points A and B iforn 40x10-11-T SAN
Question 6 5 points Save Answer The bar ABC is supported by a pin at A...

Question 6 5 points Save Answer The bar ABC is supported by a pin at A and a steel wire at B. The 36-lb horizontal force is applied at C. The cross-sectional area of the wire is 0.0025 in2 and the E of steel is 29 x 106. What is the axial load in Ibs acting in wire BD? Use two decimal places. с 36 16 4 ft 5 ft DI B 6 ft

Beam ABC is supported by the axial rod BD. Bar BD has a width of 40...

Beam ABC is supported by the axial rod BD. Bar BD has a width of 40 mm and a thickness of 10 mm and a modulus of elasticity of 70 GPa. When the vertical load P is applied at point C, a strain gauge bonded to the bar measures an increase of 1250 um/m. Determine: a. the normal stress in bar BD ANS: OBD = 87.5 b. the magnitude of load P ANS: P = 20.4 kN c. the deflection...
Problem 9.003 A rigid steel bar is supported by three rods, as shown in the figure....

Problem 9.003 A rigid steel bar is supported by three rods, as shown in the figure. There is no strain in the rods before the load P is applied. After load P is applied, the normal strain in rods (1) is 450 μm/m. Assume initial rod lengths of L1-2250 mm and L2-1700 mm. Determine (a) the normal strain in rod (2) (b) the normal strain in rod (2) if there is a 1-mm gap in the connections between the rigid...
A load P is supported by a structure consisting of rigid bar BDF and three identical...

A load P is supported by a structure consisting of rigid bar BDF and three identical 17-mm-diameter steel [E199 GPa] rods, as shown in the figure. Use a 3.3 m, b2.0 m, and L 51 kN, determine 3.9 m. For a load of P (a) the tension force produced in each rod. (b) the downward vertical deflection of the rigid bar at B 2) (a) Fi KN KN kN (b) vg-

Problem 1 (20 points) The rigid bar AB is pinned at A and supported by two...

Problem 1 (20 points) The rigid bar AB is pinned at A and supported by two aluminum rods (E = 10 x 103ksi) with diameter d = 1.2 in and the length shown for each on the figure. If the rigid bar is initially vertical, determine (a) the reaction exerted at A and (b) the average normal stress in each rod when the 40-kip force is applied. 40 kip 2 ft d = 12 in La 2 ft- (a) reaction...