Question 6 Air at the inlet of an ideal (reversible-adiabatic) compressor is at 100 kPa and...
Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and 300 K to an exit pressure of 900 kPa. if the volume flow rate = 1 m/sec Determine: the compressor power (kW) for isentropic compression with k = 1.4 Choose... the compressor power (kW) for polytropic compression with n = 1.3 Choose.. the compressor power (kW) for ideal two stage compression with intercooling with a polytropic exponent of 1.3 Choose... the compressor power (kW)...
Air is compressed by an adiabatic compressor from P2=100 kPa to P2=500 kPa. T2=380 K and T2=650 K. Air is an ideal gas with variable specific heats. Determine a) The exit temperature of the air for the isentropic case. Each of the above temperatures and pressures are given as actual. b) The efficiency of the compressor.
Air is compressed by an adiabatic compressor from 95 kPa and 27°C to 600 kPa and 277°C. Assuming variable specific heats and neglecting the changes in kinetic and potential energies, determine (a) the isentropic efficiency of the compressor and (b) the exit temperature of air if the process were reversible. b) Texit
Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and 300 K to an exit pressure of 900 kPa. Determine the compressor work per unit mass for (a) isentropic compression with k 1.4, (b) a compressor with 85% isentropic efficiency, (c) two-stage compression (100 kPa to 300 kPa, and 300 kPa to 900 kPa) with intercooling with an isentropic efficiency of 85% for both compressors. (50 points) 2.
Air enters a compressor operating at steady state at a pressure of 100 kPa, a temperature of 290 K, and with a mass flow rate of 0.72 kg/s. At the exit, the pressure is 700 kPa and the temperature is 450 K. Heat transfer from the compressor to its surroundings occurs at a rate of 3 kW. Kinetic and potential energy changes can be ignored. Determine the power input to the compressor, in kW. Assume that the air is an...
Air enters a compressor at 152 kPa and 290 K and exits at a temperature of 507.4 K. Determine the power (kW) for the compressor if the inlet volumetric flow rate is 0.139 m/s and the heat transfer through the shell of the compressor to the surroundings is 1.31 kW. Use the ideal gas tables (variable specific heats).
A compressor is takes in air at an inlet pressure of P1 = 80 kPa and an inlet temperature of T1 = 20oC and exhausts it at an outlet pressure of P2 =800 kPa and an outlet temperature of T1 = 200oC. Air flows through the compressor at a mass flow rate of m = 1 kg/s. Assume that the compressor is adiabatic. Find the power required to run the compressor. (Your answer will be in kW.)
6. Refrigerant-134a enters an adiabatic compressor as saturated vapor at 100 kPa at a rate of 0.7 m3/min and exits at 1 MPa pressure. If the isentropic efficiency of the compressor is 87%, determine (a) the temperature of the refrigerant at the exit of the compressor, (b) the power input (in kW), and (c) the rate of entropy generation during this process.
Q3: Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and 27 C to an exit pressure of 900 kPa. Determine the compressor work with the mass flow rate of 0.12 kg/s;(R-0,287 kJ/kgK) 0 a) Polytropic compression with n-1.3, b) Ideal two stage compression with intercooling with a polytropic exponent of 1 .3. Hava särekli akh, tersinir bir kompresörde 100 kPa basinç ve 27 C sicakliktan, 900 kPa basinca sikaşturidmaktadur. Akgkarun kätle debisinin 0.12...
Air is compressed steadily by a reversible compressor from 100 kPa and 300 K to 900 kPa by a 10-kW motor. Assume air is both ideal and has constant specific heat capacity values determined at room temperature from Table A-2 at room temperature (300 K). a) Determine the mass flow rate through the compressor if the process is isentropic. ( find and identify the work per unit mass) b) polytropic with n = 1.2 c) isothermal d) ideal two-stage polytropic...