Select an angular contact ball bearing to carry a radial load of 356 lbat a shaft speed of 1800 rpm for 5500 hours. An application factor of 1.2 is appropriate. Use a reliability of 96%.
We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
A ball bearing on a shaft has a variable loading as shown in the table below. What is the minimum C10 rating required for the bearing to last 10,000 hours for Ls Life? One Cycle Phase 2 6 1500 2000 1.8 Phase 1 4 1000 Phase 3 Minutes in Phase Speed (RPM) Bearing Load (N)3000 Application Factor 800 5000 1.5 1.2 A ball bearing on a shaft has a variable loading as shown in the table below. What is the...
Figure P14.28 shows two bearings supporting a 1000-rpm shaft and gear. The bearing on the left carries a 5-kN radial load and 1-KN thrust load. The loading is borderline between "light" and "moderate" impact. The required life is 5000 hours with only 2% probability of failure. Select a 200 series radial-contact ball bearing for the left bearing. Shaft Bearing Gear FIGURE P14.28
Problem #2 (50 point): A certain application requires a ball bearing with the inner ring rotating, with a design life of 40000 hr at a speed of 350 rev/min. The radial load is 2.15 kN and an application factor of 1.3 is appropriate. The reliability goal is 0.90. Find the multiple of rating life required, Xo, and the catalog rating Cio with which to enter a bearing table. Choose a 02-series deep-groove ball bearing from Table 11-2, and estimate the...
Q-1 The shaft shown in figure below, supported by and turns in the bearings A and B. The dimensions of the shaft are a = 120 mm and b = 30 mm. The forces on the bevel (conical) gear attached to the shaft are Wt = 4500 N, Wr = 2500 N, and Wa = 1000 N. The gear forces act at a radius R = 100 mm from the shaft axis. Determine the loads applied to the bearings (FrA...
An angular contact ball bearing with outer ring stationary is loaded with a 2,8 kN axial load and a 6,4 kN radial load. The inner ring 13. rotates at 480 revimin. Application factor is 1. Desired life is 20 kh under 90% reliability (C10=62 KN CO=36 kN). Evaluate the equivalent radial load factor (e) A) 0 273 B) 0.263 C) 0,275 D) 0.265 E) 0.277
A Read aloud Draw Erase Figure P14.28 shows two bearings supporting a 1000-rpm shaft and gear. The bearing on the left carries a 5-kN radial load and 1-KN thrust load. The loading is borderline between "light" and “moderate" impact. The required life is 5000 hours with only 2% probability of failure. Select a 200 series radial-contact ball bearing for the left bearing. Gear Shaft Bearing bo 10:22 PM 3 O Type here to search
A 02-series angular contact ball bearing with a 10-mm bore is loaded with a 0.3604 kN axial load and 100 kN radial load. The inner ring rotates at 8000 rev/min and working 2000-hour service. For Rd = 93% and af = 1. (a) Determine the equivalent radial load that will be experienced by the bearing. (b) Consider a rating rated life of 10^6 revolutions find C10 load experienced by bearing and calculate the factor of safety in carrying the load...
A ball bearing carries the following loads: Fr= 5000 N & Ft= 1000 N. The design requires 5000 hours of service at 1000 rpm and a reliability of 98%. Select a 300 series radial contact ball bearing.
5. Bearing life prediction. (20 points) A 02-series Score: with a 50 mm bore (sce Tables 11-1 and 11-2 for specifications) is loaded with a 2.6 kN radial load and a 4.17 KN axial load. The inner ring rotates at 1450 rev/min. The application es single-row angular contact b factor is a,1.3. C1) Determine the equivalent radial load that will be experienced by this particular bearing. (2) Determine the predicted life (in hours) that this bearing could be _expectedtogvein this...
If we desire that a AFBMA system ball bearing can take a radial load F 5 kN with a design Li life of 15000 hours at a speed of 3600 rpm. The application factor is ar-I.2. If the bearing maker's catalog ratingss are based on a L life of/ million revolutions. The three Weibull parameters are x, -0.02, (0-x,)- 4.439, and b-1483 The minimum required catalog (for / millionrevolutions) loaa rating C0 should be equal to )(A) A s V....