a catalytic reaction of gas phase A-R is carried out
in a PFR containing 0.01 kg of solid catalyst, feed rate, Fao =
1500mol / hour. the reactor is operated at 3.2 atm and 117 C.
kinetics data are shown in the following table
determine :
a. reaction order
b.weight of catalyst required of conversion is 35%
a catalytic reaction of gas phase A-R is carried out in a PFR containing 0.01 kg...
a catalytic reaction of gas phase A-R is carried out in a PFR containing 0.01 kg of solid catalyst, feed rate, Fao = 1500mol / hour. the reactor is operated at 3.2 atm and 117 C. kinetics data are shown in the following table determine : a. reaction order b.weight of catalyst required of conversion is 35% uToper 3 2 Run 0,040 0,038 0,060 0,080 0,100 0,084 CAins mol/liter 0,055 0,070 Caut mol/liter uToper 3 2 Run 0,040 0,038 0,060...
An isothermal (170 °C) isobaric (6 atm) catalytic gas-phase reaction is carried out in a fluidized CSTR: Assume that the reaction is elementary. The feed (benzene and hydrogen) is stoichiometric with θ。= 50-. The rate constant defined wrt benzene is 53 mol / (kgcat * min * atm) at 300 K with activation energy of 80 kJ/mol. What catalyst weight is required to reach 80% conversion? Hint: Use ideal gas law to relate pressure to concentrations (note the units of...
2) ZA → B is a gas-phase elementary reaction carried out in a PFR. Conversion of A = 80%. The feed is pure A. What is conversion when the molar feed rate is cut in half?
Question 1: Design of isothermal reactors 30 Marks The irreversible, gas-phase reaction A+B D is to be carried out in an isotherma °C) plug-flow reactor (PFR) at 5.0 atm. The mole fractions of the feed streams are A 0 B 0.50, and inerts 0.30. The activation energy for the above reaction is 80 000 cal/mol. the pressure drop due to fluid friction in the reactor is so small that it can be ignored, perform the following tasks: 2T a s...
2. The irreversible gas phase reaction A B is carried out isothermally in a fluidized catalytic CSTR. The reaction rate is first orderw.r.t.the partial pressure of A (-rA KA PA). With arn entering pressure 20 atm, an negligible pressure drop in CSTR, and 50 kg of catalyst, a conversion of 50% was realized for pure A feed. |-Fluidized hal oooo -catalyst o ojo | |,'-/ pellets Now, a PBR is connected to the downstream of this CSTR with a same...
Problem 5. The gas-phase elementar isomerization A B is carried out at 20 atm in a fluidized CSTR (below) containing 100 kg of catalyst where 50% conversion is achieved. Po:20 atm FAo 100kg . P-20 atm X 0.5 Someone proposed to replace the CSTR with a packed bed reactor (PBR, below), the entering pressure was 20 atm and the exit pressure was found to be 5 atm Po-20 atm FAo (100kg) (1) What would be the conversionif No pres ro...
energy il Camor P5-30 Pressure Drop. The gas phase reaction A+B C+D is carried out isothermally at 227 C in a packed-bed reactor with 100 kg of catalyst. The reaction is first order in A and first order in B. The entering pres- sure was 20 atm and the exit pressure is 1 atm. The feed is equal molar in A onigA and B and the flow is in the turbulent regime with FA0 10 mol/min and CAO= 0.25 mol/dm3....
(3) The gas phase reaction 2A +B- C is carried out in an isothermal PFR without pressure drop. At the entrance, the feed contains 1/2 molar fraction of A, 1/3 molar fraction of B and 1/6 molar fraction of inert chemical I. The entrance temperature is 500K and the entrance pressure is 16.4 atm. If the conversion of A at the exit is 0.8, what is the conversion of B?
The second order gas phase irreversible reaction: 2.4-B is carried out in an isothermal batch reactor containing 40 kg of catalyst and with an initial volume of 60-liter. The reactor is initially filled with equal molar quantities of A and inert I at 300 K and 2.5 atm. Calculate the time needed for the concentration of product (B) to be 0.02 mole/liter if: a) the reaction takes in a constant pressure batch reactor (3 points) b) the reaction takes place...
The gas-phase reaction with a mixture of 75% A and 25% inert is carried out isothermally at 227°C and 20 atm in a PFR. AB+C If the reaction is second order, Calculate the volume (dm3 to 2 decimal place) at X - 0.74. -ra = kCa2, k = 0.7 min-1, Fao = 5; mol/min