To achieve good combustion, air (oxygen) must be present and thoroughly mixed with fuel (waste) to produce CO2 and H2O. During combustion, 79% of inert Nitrogen interferes with combustion process. Thus a good combustion do require excess air beyond stoichiometric amount of air (oxygen). Excess air is also used for incinerator temperature control since it absorbs heat from the combustion reaction! 1900 lbs/hr of a waste mixture of 35% Benzene, 60% Toluene and 5% water is incinerated with 35% excess air. Determine (a) the heat release, and (b) % by volume of each component in the flue gas.
Show work
To achieve good combustion, air (oxygen) must be present and thoroughly mixed with fuel (waste) to...
You are in charge of a combustion furnace. The furnace is fed an air stream and a methane stream which is combusted to produce heat that is used to boil water and produce steam for your plant. The combustion of fuels using an air stream which contains nitrogen generally produces significant amounts of NO, compounds which are an air pollutant, so the exhaust gases must generally be removed through various processes. In this case, your furnace exhaust is passed through...
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8) and 15% butene (C4H8) by volume. It is to be fed to the combustion chamber in 10% excess air at 25ºC, where it is completely burnt to carbon dioxide and water. The flue gases produced are to be used to generate 5 bar steam from water at 90ºC. net calorific value (MJm-3) at 25oC Butane (C4H10) = 111.7MJm-3, Butene (C4H8) = 105.2 MJm-3. Propane (C3H8) = 85.8 MJm-3. air...
Methane gas is burned with 30 percent excess air. This fuel enters a steady- flow combustor at 0.8 atm and 25oC and is mixed with the air. The products of combustion leave this reactor at 0.8 atm and 1600 K. Determine the equilibrium composition of the products of combustion and the amount of heat released by this combustion in kJ/kmol methane. Use data from the tables CH 25°C CO2, H3O chamber NO. O2 N2 1600 K 30% excess air 25°C...
10. Write a one-page summary of the attached paper? INTRODUCTION Many problems can develop in activated sludge operation that adversely affect effluent quality with origins in the engineering, hydraulic and microbiological components of the process. The real "heart" of the activated sludge system is the development and maintenance of a mixed microbial culture (activated sludge) that treats wastewater and which can be managed. One definition of a wastewater treatment plant operator is a "bug farmer", one who controls the aeration...