solution: resolving power = 3737
resolving power (RP) is a dimensionless ratio defined as the mobility drift time (td) divided by the width of the peak (Δtd): RP = td / Δtd
mobility drift time (td) = 283.980
width of the peak (Δtd) = 0.076
putting above value in the resolving power equation
RP = 283.980 / 0.076 = 3737
Calculate the resolving power for m/z = 283.980 if the width of half height is 0.076...
Calculate the resolving power of a mass spectrometer that gave a mass spectrum with a peak centered at m/z 1141 with a width at the half-height of 0.70 m/z units. resolving power Would you expect this spectrometer to be able to distinguish two peaks found at m/700 and m/2 7017 no yes Would you expect this spectrometer to be able to distinguish two peaks found at m/2 6000 and m/: 6001? yes no
z When multiple radio telescopes are used for interferometry, resolving power is most improved by increasing (a) the distance between telescopes; (b) the number of telescopes in a given area; (c) the diameter of each telescope; (d) the electrical power supplied to each telescope.
QUESTIONS 1. What is resolution "resolving power"? II. um. What does this 2. The resolving power of the compound light microscope is value mean? 3. Define parfocal, and explain the significance of understanding this concept when using the compound light microscope? 4. What is the total magnification of a compound light microscope? 38 MICROSCOPY and instrumentation Part II: MICROSCOPY: Lab Activity 1
(1) Prompt the user to input a wall's height and width. Calculate and output the wall's area. (Submit for 2 points). Enter wall height (feet): 12 Enter wall width (feet): 15 Wall area: 180 square feet (2) Extend to also calculate and output the amount of paint in gallons needed to paint the wall. Assume a gallon of paint covers 350 square feet. Store this value using a const double variable. (Submit for 2 points, so 4 points total). Enter...
a room has a width of 10cm and height of 5cm. calculate the following area in cm area in m
Calculate the surface-to-volume ratio of the following cubes: Cube 1: length, width, and height: 5 mm Cube 2: length, width, and height: 3 mm a. What were the surface-to-volume ratios for Cubes 1 and 2? (2 points) b. Which cube would be more efficient as a cell? (1 point)
2. a. Discuss the practical importance of the antenna beam width b. For an Omni-directional antenna the measurements show the Half Power Beam Width (HPBW) in vertical and horizontal planes are 30° and 20° respectively, antenna has loss resistance of 25Ω and efficiency η-0.8,Find: i. Antenna's gain in dB, and ii. Radiation resistance.
2. a. Discuss the practical importance of the antenna beam width b. For an Omni-directional antenna the measurements show the Half Power Beam Width (HPBW) in vertical...
A wall in a building has a width of 15 m and a height of 3 m. It is made of several layers — a layer of motionless air with an R value of 0.12 K m2/ W, a 12.4 mm thick layer of gypsum board with a thermal conductivity of 0.17 W/m K, a layer of brick with an R value of 1.7 K m2/ W, and another layer of motionless air with an R value of 0.12 K...
in python please (1) Prompt the user to input a wall's height and width. Calculate and output the wall's area (integer). (Submit for 2 points). Enter wall height (feet): 12 Enter wall width (feet): 15 Wall area: 180 square feet (2) Extend to also calculate and output the amount of paint in gallons needed to paint the wall (floating point). Assume a gallon of paint covers 350 square feet. Store this value in a variable. Output the amount of paint...
A tunnel of length L = 130 m, height H = 7.3 m, and width 5.5 m (with a flat roof) is to be constructed at distance d = 47 m beneath the ground. (See the figure.) The tunnel roof is to be supported entirely by square steel columns, each with a cross-sectional area of 893 cm2. The mass of 1.0 cm3 of the ground material is 2.1 g. (a) What is the total weight of the ground material the...