a film with n = 1.64 is deposited on glass. what is the thinnest film that...
A thin film with n = 1.2 is deposited on glass (n = 1.5) What is the thinnest film that will produce a strong reflection for orange light with a wavelength of 600 nm? Please show all work
What is the thinnest film of a coating with n = 1.38 on glass (n=1.52) for which destructive interference of the red component (640 nm) of an incident white light beam in air can take place by reflection?
What is the thinnest film of MgF2 (n = 1.39)on glass that produces a strong reflection for light with a wavelength of 490 nm?
A thin film of MgF2 (n = 1.38) coats a piece of glass. Constructive interference is observed for the reflection of light with wavelengths of 470 nm and 705 nm . Part A What is the thinnest film for which this can occur? Express your answer with the appropriate units.
I dont understand thin film interference. Thanks in advance n-1.00 n-1.33 n=1 50 3. A thin film of thickness t and index of refraction 1.33 coats a glass with index of refraction 1.50 as shown above. Which of the following thicknesses t will not reflect light with wavelength 640 nm in air? (A) 160 nm (8) 240 nm (C) 360 nm (D) 480 nm 4. Lenses in fine quality cameras are coated to reduce the reflection from the lenses. If...
A very thin oil film (n=1.25) floats on water (n=1.33). What is the thinnest film that produces a strong reflection for green light with a wavelength of 500 nm?
A thin film with n = 1.6 coats a piece of glass. Destructive interference is observed for the reflection of light with wavelengths of 450 nm and 675 nm. What is the thinnest film for which this can occur? Express your answer in nm.
A transparent film (n=1.3) is deposited on a glass lens (n=1.5) to form a reflective coating. What is the minimum thickness that would maximize reflection of light with a wavelength of 500.0 nm in air? and the answer 96 nm is incorrect
The default setting is a thin film of glass(n = 1.5) with air (n = 1)on both sides.The starting wavelength is 652 nm and the starting thickness is 544 nm. Use these starting values for this next set of questions. 1. Is there a phase shift on the front (left) interface? On the back (right) interface in the simulation?Justify why there is/isn’t a phase shift at each interface. 2. How does the wavelength in the film (glass) compare to the...
A thin film of acetone (n = 1.25) coats a thick glass plate (n = 1.50). White light is incident normal to the film. In the reflections, fully destructive interference occurs at 510 nm and fully constructive interference at 574 nm. Calculate the thickness of the acetone film.