Determine the total heat loss from a shed (10’x10’x10’) being heated by a small wood stove.
The internal temperature of the shed is 70oF and the outdoor temperature is 21oF.
The shed walls are made up of 1.5 inch of plywood (0.94 per 3/4") and 1 inch of polystyrene (R=5 per 1"), while the roof made of insulated corrugated metal has a combined U value of 0.2 BTU/oF ft2 hr. There are two glass windows measuring 2’ x 3’ with a R-value of 1.0 oF ft2 hr/BTU. as well as 1 wooden door ( 80” x 36”) with an R-value of 5 oF ft2 hr/BTU.
Assume there is no heat loss through the concrete foundation.
Select one:
a. 4090.932
b. 4384.932
c. 4318.84
d. 3404.93
e. 3828.84
Determine the total heat loss from a shed (10’x10’x10’) being heated by a small wood stove. The internal temperature of the shed is 70oF and the outdoor temperature is 21oF. The shed walls are made up of 1.5 inch of plywood (0.94 per 3/4") and 1 inch of polystyrene (R=5 per 1"), while the roof made of insulated corrugated metal has a combined U value of 0.2 BTU/oF ft2 hr. There are two glass windows measuring 2’ x 3’ with a R-value of 1.0 oF ft2 hr/BTU. as well as 1 wooden door ( 80” x 36”) with an R-value of 5 oF ft2 hr/BTU. Assume there is no heat loss through the concrete foundation.
Determine the total heat loss from a shed (10’x10’x10’) being heated by a small wood stove....
summarizr the followung info and write them in your own words and break them into different key points. 6.5 Metering Chamber: 6.5.1 The minimum size of the metering box is governed by the metering area required to obtain a representative test area for the specimen (see 7.2) and for maintenance of reasonable test accuracy. For example, for specimens incorporating air spaces or stud spaces, the metering area shall span an integral number of spaces (see 5.5). The depth of...
summatize the following info and break them into differeng key points. write them in yojr own words apartus 6.1 Introduction—The design of a successful hot box appa- ratus is influenced by many factors. Before beginning the design of an apparatus meeting this standard, the designer shall review the discussion on the limitations and accuracy, Section 13, discussions of the energy flows in a hot box, Annex A2, the metering box wall loss flow, Annex A3, and flanking loss, Annex...