QUESTION 5 In a Y-connected, 3-phase, 4-wire p.p.s load, a current of 45.9L -36 A is...
8.25 A three-phase balanced \(Y\) -connected load with series impedances of \((8+j 24) \Omega\) per phase and mutual impedance between any two phases of \(j 4 \Omega\) is supplied by a three-phase unbalanced source with line-to-neutral voltages of \(V_{a n}=200 \angle 25^{\circ}, V_{b n}=100 \angle-155^{\circ}\), \(V_{c n}=80 \angle 100^{\circ} \mathrm{V}\). The load and source neutrals are both solidly grounded. Determine: (a) the load sequence impedance matrix, (b) the symmetrical components of the line-toneutral voltages, (c) the symmetrical components of the...
A 3-phase 4 wire symmetrical (balanced) Y-connected source with line voltage 340V (take the phase of VanVan to be 0 degrees) feeds an unbalanced three phase load formed by the impedances ZY1=14+j(14)Ω, ZY2=7+j(11)Ω and ZY3=20+j(−14)Ω connected in a Y (a.k.a. “star”, or a “tee”) configuration. Find the line currents, neutral current (current in the fourth “return” wire), and active power in each phase. (20 points) A 3-phase 4 wire symmetrical (balanced) Yconnected source with line voltage 340V (take the phase...
2.11. A 4157-V rms, three-phase supply is applied to a balanced Y-connected three-phase load consisting of three identical impedances of 48236.87°2. Taking the phase to neutral voltage Van as reference, calculate (a) The phasor currents in each line. (b) The total active and reactive power supplied to the load.
connected 3-phase load consisting of three identical impedances Z= 48ے36.870 W. 3-Phase System Using MATLAB/Simulink Analysis of Y-Y connected balanced 3-phase circuit using Matlab A 2400-V rms balanced 3-phase 60-Hz supply is applied to a balanced Y-connected 3-phase load consisting of three identical impedances Z- 4836.870 W. The circuit diagram is shown in Fig. 3. Taking the phase to neutral voltage Van as reference. Calculate 1) The phase &line voltage Van, Vab 2) The phase current for any phase- line...
Question 25 A balanced 3-phase Y-connected power supplies an office building through a four-wire distribution. The circuit operates at 60 Hz. The voltage at the source is such that ? is taken in reference value and its value is 380 V in rms value and phase sequence ABC (positive). All the distribution line conductors are of the same material and have equal cross-sections. Considering the length of the line and the characteristics of the electrical cables, the impedances neutral conductors...
2) The reactive power of the balanced Y-Y connected three phase system depicted below is to be compensated by adding shunt capacitors. The network frequency is known as 50 Hz. The load resistances are R 330ΣΩ and the load inductances are L H. The phasor of the voltage for R phase is given as V 220/2 Volts. a) Find the followings before connecting the power factor compensation capacitors: i) The effective values of the line currents IR, Is, IT, ii)...
Question 2: Three phase circuit. (100p) A wye connected generator supplies a delta connected balanced load through short feeder. seree the load line to neutral voltage as reference voltage phase angle zero. 02.1 Q2.2 Q2.3 Q2.4 Draw the equivalent circuit. 10p Calculate the load line-to-neutral voltages and line-to-line voltages. 20p Calculate the delta load currents and feeder currents. 20p Calculate the supply wye connected generator line-to-neutral voltages. Is the obtained values are acceptable? Calculate the generator real and reactive power...
ELE2601/101/3/2019 QUESTION 4 A 400 V three-phase, 50 Hz system, ABC sequence supplies the following loads: A star-connected load with the following phase impedances: A delta-connected load of equal phase impedances: Use VAB as reference and determine the following quantities: 4.1 The magnitude and angle of the currents drawn by the star-connected load (IAN; lBN; ICN). 4.1.1 The magnitude and angle of the phase (IAB; lBc; ICa) and line (lA; ls; Ic) currents drawn by the delta-connected load. 4.1.2 (12)...
A three-phase generator connected in star generates a phase voltage of Vθ = 220 Vrms and supplies a three-phase load also connected in star. The three phases of the generator are connected to the three loads shown Remember that the return of the current of each charge is through the Neutral. a) Calculate the phase, line, load and neutral currents b) Calculate the phase, line and load voltages c) Calculate the powers of Apparent (S), Real (P) and Reactive (Q)...
UISIZULU Problem 4 A three phase, 5 kW, wye-connected load operate onnected load operates at 0.8 power factor lagging with a terminal voltage of 100 V (line to line). The cables connecting e bles connecting each phase of the load to the wye-connected supply has an impedance of (0.25 +0.25) 12. Compute the following: a) Reactive power drawn by the load. b) Real and reactive power losses in the system. me current and line voltage at the source terminals and...