A 277 V (rms) supply delivers 50 A to a single phase generator. The motor windings cause the current to lag behind the voltage by ?/6 rad. Calculate the power factor, active power, and reactive power.
A 277 V (rms) supply delivers 50 A to a single phase generator. The motor windings...
I just need answers to f,g,and h connected motor is connected to Vi-L 120 3T/6 V-rms, 50 Hz three e resistance and inductance of each phase is 8-Ω and 0.04 H, respectively. The PS. A three-phase phase source. The wire between a source and the motor has 0.1-Ω of resistance and 1 mH inductance. nd the phase voltage. (2 pts.) a single-phase diagram of the system with its values. (5 pts.) c) Find the line current (magnitude and phase) for...
2.3 (20 points) A separately-excited de motor is mechanically coupled to a three-phase, 4-pole, 30-kVA, 460-V, round-rotor synchronous generator. The de motor is connected to a constant 230-V de supply The ac generator is connected to a 460 V, fixed-voltage, fixed-frequency, three-phase supply. The synchronous reactance of the synchronous generator is 513 Ω/phase. The armature resistance of the de motor is 30 m2. The 4-pole de machine is rated 30 kW at 230 V. All unspecified losses are to be...
The three-phase average power of a synchronous motor is 23kW. The three-phase line supplying the motor has a line voltage rating of 208 V (rms). The line current is 75A per phase. Determine the power factor and the reactive power absorbed by the motor/
A balanced Y-connected voltage source with a phase voltage ? = 277∠0°? delivers to a balanced delta connected load with impedance ?ௗ௧ = 45 − ?18Ω that is in parallel with a Yconnected load with impedance ? = 30 + ?15Ω. (a) Calculate the current at the source (b) Calculate the source real and reactive power
2.11. A 4157-V rms, three-phase supply is applied to a balanced Y-connected three-phase load consisting of three identical impedances of 48236.87°2. Taking the phase to neutral voltage Van as reference, calculate (a) The phasor currents in each line. (b) The total active and reactive power supplied to the load.
please take note the question is extend a) A single phase 240V 50Hz supply is supplying a power to a load which consist of 500 resistance and 0.3H inductance through a cable which has an effective impedance of 1+j2 0. The equivalent circuit of the single-phase system is shown in Figure Q1(a). Zcable=1+j2 I Load 5092 240V 50Hz Supply V Load 0.3H Figure Q1(a): A single phase system. i. ii. Determine the load current, low and the load voltage Vood...
if a 480 v supply delivers 50 A with a power factor of 0.8 find the real power, reactive power, apparent power draw the power triangle
Problem 7 (Chapter 5: Three-Phase Synchronous Motors) A 440 V, 124 HP, 4 poles, 50 Hz, 0.9 leading Power Factor, A-connected synchronous motor has an armature resistance of 0.05 12, and a synchronous reactance of 1.5 12. This motor is operating at its rated conditions with an efficiency of 92 %. 1. Calculate the electrical input power. 2. Find the RMS phase and line currents. 3. What is the reactive power consumed by or supplied by this motor? 4. Calculate...
If a 120 V (rms) AC power supply is connected to a 200 W motor. a)Calculate and explain whether or not the rms current of the circuit will be the same if the system is connected to a 14.0Ω resistor. (I need a clear explanation in b)) b)Calculate and explain whether or not the rms voltage drop across the motor is the same when there is no resistor, but the internal resistance of the wires of the circuit is 14.0Ω.
a) define complex power in terms of the supply current i and v b) draw separately the current and power phasor relations for the case of a load consisting of a series connection of a resistor and an inductor across the voltage supply c) A single phase load connected to a 230V, 50Hz source draws is rated 1.84kVA at a phase angle of 40,lagging, determine the current drawn from the supply and load power factor, calculate the active and reactive...