Suppose a disk drive in your system has a rotation speed of 7,200 rpm. and seek...
Suppose a disk drive in your system has a rotation speed of 7,200 rpm. and seek times of 0.75 ms track-to-track, or 22 ms full ‘stroke’ (inner edge to outer edge).
(a) What is the average latency to access this drive?
(b) If the sustained read rate is 36 Mbits/sec, how much more time after the average latency (you calculated above) will it take to read 750 Kbytes (assuming all those bytes are in sequential sectors on the same track)? How long to write that same amount of data if the sustained write speed is 24 Mbits/sec?
Homework Answers
![Answer: given opm = 2200 10.05 seek time 22 ms foll stroke formula for average latency. spindle speed [60] x 0.5 X1000 (09172](http://img.homeworklib.com/questions/77efaa70-821b-11ec-92de-83b85b4a1a23.png?x-oss-process=image/resize,w_560)
Add Answer to:
Suppose a disk drive in your system has a rotation speed of
7,200 rpm. and seek...
A hard disk has average seek time of 70 ms, rotation speed of 4150 rpm, and...
A hard disk has average seek time of 70 ms, rotation speed of 4150 rpm, and 333 byte sectors with 55 sectors per track. We need to read a file consisting 130 sectors. Answer the following? Total average access time can be expressed as T a = T s+1/(2r)+b/rN ̈ What is the total file size to be transferred? ̈ What is the total time for the transfer if data is organized sequentially? ̈ What is the total time for...
Consider a single-platter disk with the following parameters: rotation speed: 7200 rpm; number of...
Consider a single-platter disk with the following parameters: rotation speed: 7200 rpm; number of tracks on one side of platter: 30,000; number of sectors per track: 600; seek time: one ms for every hundred tracks traversed. Let the disk receive a request to access a random sector on a random track and assume the disk head starts at track 0. a. What is the average seek time? b. What is the average rotational latency? c. What is the transfer time...
2) b. A disk drive has a speed of 12000 RPM, an average seek time of...
2) b. A disk drive has a speed of 12000 RPM, an average seek time of 5 ms, and a transfer rate of 140 MB/sec. How much time does it take to perform 50 random reads of 10 KB? (In other words, the 50 reads are from random spots on the drive, but each individual read is performed sequentially.) Give your answer in units of seconds. c. Given the same information as in b) above, what is the I/O rate...
A program must write 4 sectors onto a disk. Each sector is 0.5KB. The disk drive...
A program must write 4 sectors onto a disk. Each sector is 0.5KB. The disk drive rotates at 10,000 rpm. The average seek time is 6 ms and the disk controller overhead is 1 ms. The transfer rate is 1 MB/sec. The current location of the R/W head is not known. What is the time to write this data if a. Sectors are on the same track and are contiguous b. Sectors are on the adjacent cylinders. The sectors can...
Question 12 Consider a magnetic disk drive with 10 double sided platters, 512(=2^9) tracks per surface,...
Question 12 Consider a magnetic disk drive with 10 double sided platters, 512(=2^9) tracks per surface, and 1024 (=2^10) sectors per track. Sector size is 2KBytes (=2^10 Bytes ). Assume the average seek time 0.02 ms, the seek time from a track to its adjacent track can be ignored. The drive rotates at 5400 rpm. Successive tracks in a cylinder can be read without head movement. Furthermore, disks can be handled independently, so multiple tracks in a cylinder can be...
A) How long does it take to read 1,056,000 contiguous bytes from a disk with these...
A) How long does it take to read 1,056,000 contiguous bytes from a disk with these specs: Block (sector) size: 512 bytes Sectors per track: 180 IODCU overhead: 1.6 ms Seek time: 11 ms Rotation speed: 12,500 RPM B) A disk has 250 (512 byte) blocks per track and a data transfer rate of 22.4 Megabytes per second. What is the disk's rotational speed in revolutions per minute (RPM)?
Assume a rather old disk drive is configured as follows. The total storage is divided among...
Assume a rather old disk drive is configured as follows. The total storage is divided among 32 surfaces. There are 2048 tracks per sector. There are 512 sectors per track. There are 512 Bytes per sector. The interleaving factor is 4. The disk turns at 7200 rpm. The average startup time for the read/write arm is 15 ms and the average time to move the arm is 0.2 ms per track. Now assume that there is 8 MB file on...
??? 4) A disk has a rotation time of 6 ms and a controller overhead of 1 ms. It takes 106 ms to ac record 2,304,000...
???
4) A disk has a rotation time of 6 ms and a controller overhead of 1 ms. It takes 106 ms to ac record 2,304,000 bytes long from the disk. The data transfer time for this record is 90 ms. a) What is the seek time for this disk? b) How many tracks does the record occupy? c) How big is a track on this disk in bytes? d) What is the disk's bandwidth in megabytes per second? e)...
A given disk drive has the following parameters: Average seek time of 7 ms Rotates at...
A given disk drive has the following parameters: Average seek time of 7 ms Rotates at 6000 RPM Transfers data at 100 MB/s What is the average amount of time it takes to read one sector (512 bytes) of data? Your answer should be in seconds to three digits of precision (e.g., X.XXX s).
5. A disk has 1024 sectors/track with 4096 bits/sector and a rotation rate of 7200 RPM....
5. A disk has 1024 sectors/track with 4096 bits/sector and a rotation rate of 7200 RPM. What is the sustained transfer rate of the disk over one track?
A program must write 4 sectors onto a disk. Each sector is 0.5KB. The disk drive rotates at 10,000 rpm. The average seek time is 6 ms and the disk controller overhead is 1 ms. The transfer rate is 1 MB/sec. The current location of the R/W head is not known. What is the time to write this data if a. Sectors are on the same track and are contiguous b. Sectors are on the adjacent cylinders. The sectors can...
???
4) A disk has a rotation time of 6 ms and a controller overhead of 1 ms. It takes 106 ms to ac record 2,304,000 bytes long from the disk. The data transfer time for this record is 90 ms. a) What is the seek time for this disk? b) How many tracks does the record occupy? c) How big is a track on this disk in bytes? d) What is the disk's bandwidth in megabytes per second? e)...
5. A disk has 1024 sectors/track with 4096 bits/sector and a rotation rate of 7200 RPM. What is the sustained transfer rate of the disk over one track?
Most questions answered within 3 hours.
-
Calculate the pH of a 5.7 M solution of aniline (C6H5NH2; Kb =
3.8 x 10^-10)
asked 1 hour ago -
LSL R3, R3, R12
Memory
Address
Orig.
Data
Updated
Data
Register
Orig.
Data
Updated
Data
0x84F0...
asked 1 hour ago -
Air at 100 kPa and density of 1.2 kg/m3 flows upward through a
5-cm diameter inclined...
asked 1 hour ago -
Define the following concepts in your own words: (a) stiffness,
(b) strength, (c) strain,
(d) ductility,...
asked 2 hours ago -
In C++
In this homework, you will be tasked with creating functions to
manipulate strings that...
asked 2 hours ago -
An isolated colony represents a pure culture. one rare occasions
, however , a colony can...
asked 3 hours ago -
*****DO NOT ANSWER THIS QUESTION IF YOU DON'T
KNOW*******Rights and Duties of Auditors; Minimum 4000
words...
asked 4 hours ago -
The probability that Janie is wearing sunglasses is 1/4. The
probability that she is wearing sunglasses...
asked 4 hours ago -
Do you believe social media is more of a help or a hindrance in
controlling crises...
asked 4 hours ago -
Two long, parallel wires separated by 2.85 cm carry currents in
opposite directions. The current in...
asked 4 hours ago -
Question # 1. Develop a list of rehabilitation journals
that publish articles concerning career counseling for...
asked 4 hours ago -
Bryant Company has a factory machine with a book value of
$85,100 and a remaining useful...
asked 4 hours ago