30. The secondary of a potential transformer is usually rated at? (a) 24 volts. (b) 32...
Q/&&&A transformer rated at primary voltage 4800 volts and a secondary voltage of 240 volte what is the turn's ratio and Primary and secondary current
1. If 480 volts is applied to the primary winding of a transformer which has 300 turns in the primary winding and 15 turns in the secondary winding, the secondary voltage will be A. 0.0417 volts. C. 56.8 volts B. 24 volts. D. 9600 volts. 2. A distribution transformer with a grain-orientented steel core is highly efficent because its A. exciting current is sufficiently high. B. flux direction is parallel to the stell-rolling direction C. permeability is increased due to...
Problem 1: A three-phase transformer has the following name plate data: Rated Power Primary voltage Secondary Voltage Excitation reactance Series Impedance 150 MVA 230 kV 32 kV 30 (pu) 0.02+0.15j (pu) The transformer is Y/A connected. Answer the following questions: a) What are the nominal (rated) primary and secondary line currents?| b) What is the nominal value of the Delta-side winding (internal) current? c) What is the secondary to primary winding turn ratio? d) The transformer is supplying 150 MVA...
ated for 240 volts primary. There are two secondary windings; #1 is 24 volts at 100 watts #2 is 120 volts at 3 amps (assume 100% efficient) pri pri out Repeat problem #4 if the transformer is 80% efficient. pri pri out
what's the taring of a transformer whose secondary voltage measures 600 volts with a secondary current of 60 amps ? a.42kva b.36kva c.10kva d.20kva
A transformer consists of 290 primary windings and 842 secondary windings. PART A: If the potential difference across the primary coil is 29.0 V , what is the voltage across the secondary coil? Express your answer in volts to three significant figures. PART B: If the potential difference across the primary coil is 29.0 V , what is the current in the secondary coil if it is connected across a 150 Ω resistor? Express your answer in amperes to three...
4. Given the power transformer circuit below: a. Given the resistor on the secondary output side is 100 ohms with a v across it of 40 volts, what is the transformer turns ratio, N? oltage b. What is the resistance '"seen" by the primary winding? c. What is the primary current, Ip? d. What is the secondary current, Is? 120 V ( boh3
Part A: A transformer with turns ratio (primary/secondary) of 18:1 is used to step down the voltage from a 120 V wall socket to be used in a battery charger. What is the voltage supplied to the recharger? Part B: The electric motor in a toy train requires a voltage of 9.0 V. Find the ratio of turns on the primary coil to the turns on the secondary coil in a transformer that will step the 120-V household voltage down...
A single-phase transformer is rated at 10 kVA, 240/100 V. When the secondary terminals are open-circuited and the primary winding is supplied at normal voltage, the input current is 2.6 A at a power factor of 0.3 lag. When the secondary terminals are short-circuited, a voltage of 18 V applied to the primary causes the full-load current to flow in the secondary, the power input to the primary being 240 W. Calculate (a) the regulation (b) the efficiency of the...
7. A transformer is rated at 75kVA, with a primary voltage of 32kV. When tested under "Full Load" condition, its copper loss is 870W and core loss is 320W. If an industrial load rated at 1500V with a pf = 0.76 is connected to the secondary, determine: a) The transformation ratio. b) Total power loss at "one-third load". c) Efficiency of the transformer at "one-third load". d) Primary and secondary currents at "one-third load".