A four-pole Y-connected, 415 V, 50 Hz, induction motor has phase
equivalent
circuit parameters of R1= 2 ohms. R2=2.2 ohms. X1=X2=4 ohms.
X(motor)=90 ohms
Under rated condition, the rotor slip is 6%.
(i) What is the rotor speed and rotor electrical frequency under
the
rated conditions;
(ii) Calculate the stator input current, power factor, and
electromagnetic
torque under these conditions;
(iii) The machine is running at rated conditions and it is to be
stopped
by switching the two stator leads. What is the slip and
inducted
torque immediately after switching the stator leads?
(iv) One of the concerns for induction machines is their high
starting
current. Explain the causes for this and the common methods
to
reduce the starting current.
A four-pole Y-connected, 415 V, 50 Hz, induction motor has phase equivalent circuit parameters of R1=...
A 415-V, Y-connected, 4-pole, 50 Hz, three-phase induction motor has the following parameters on a per-phase basis, as referred to the stator: R1 = 0.25 ohms, X1 = 0.75 ohms, R2 = 0.55 ohms, X2 = 1.2 ohms, Xm = 50 ohms. The core loss is 200 W and rotational (mechanical) losses are 200 W. The machine is running at full load at a speed of 1450 r.p.m. Using the exact equivalent circuit, calculate- The total input current, The power factor, The air-gap power developed, The...
Question: The equivalent circuit of a 440 V, 3-phase, 8 pole, and 50 Hz star-connected induction motor is shown in figure 1. The short-circuit test is conducted with a locked rotor and a line current of 80 A. The open-circuit test is conducted by supplying the stator winding at rated voltage and at the rotor is rotating freely without any mechanical load. Fig. 1 The per-phase equivalent circuit of a 3-phase induction motora) Determine the line voltage and power factor on the...
The equivalent circuit of a 440 V, 3-phase, 8 pole, and 50 Hz star-connected induction motor is shown in figure 1. The short-circuit test is conducted with a locked rotor and a line current of 80 A. The open-circuit test is conducted by supplying the stator winding at rated voltage and at the rotor is rotating freely without any mechanical load.a) Determine the line voltage and power factor on the short circuit test;b) We need to apply a low...
Please solve this question. Thank you. A two-pole, 75kW, 440 V, 50 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters, in Ω/phase referred to the stator: R1-0.075, XI 0.17, xm-72, R2-0.065 and X-0.17. Its rated slip is 4%. Assume that the mechanical losses are 1 kW and the core losses are 1.1 kW. Compute: a. The rated input current b. The rated power factor. c. The pullout torque d. The induced and load torques at rated conditions....
Q3. A single-phase, 120 V, 60 Hz, four-pole, split-phase induction motor has the following equivalent circuit parameters: Stator parameters: The Main winding (R =1.512, X=2.522), and the auxiliary winding (R=2.512, X=2.52), Rotor parameters referred to the stator side: (R=1N, X=1.592). The magnetizing reactance is equal to 4082. (a)Determine the standstill impedances of both windings. (b)Determine the starting torque and the starting current of the motor if it is started from rated voltage mains as a split phase induction motor. (c)Determine...
5. A 208-V four-pole 60-Hz Y-connected wound-rotor induction motor is rated at 30 hp. Its equivalent circuit components are R=0.100 Ry=0.070. X - 10.00 R = 250 X; -0.2100 X=0.21002 Praw=500 W P =0.5% of input at full load For a slip of 0.05, find (a) The line current (b) The induced voltage in the rotor (c) The stator power factor (d) The rotor power factor (e) The rotor frequency (f) The stator copper losses (g) The core loss (h)...
A 3 phase, 460V, 60Hz, 6-pole induction motor has the following equivalent circuit parameters per phase: R1 = 0.2 ohms R2 = 0.28 ohms X1 = X2 = 1.055 ohms Xm = 33.9 ohms The no load losses, comprising friction, windage, and iron losses equal 26W. The motor is coupled to a load and connected to a 460V supply, and the rotor speed is found to be 1156 RPM. For this motor connected to a 460V supply calculate the following:...
A 230 V, 50 Hz, three-phase, Y-connected, 6-pole induction motor has the following per-phase parameters R-0.07 Ro 00 0.08 Ω x, x, 0.3 xm 6.33 At a slip of 2%, determine the followings using approximate equivalent circuit of the motor i) The motor speed in rev/min and rad/s. ii) The rotor current. ii) The stator current. iv) The induced torque. v) The efficiency of the motor.
. A 460-V 460-V, 25-hp, 60-Hz, six-pole, Y-connected induction motor has the following impedanc ohms per phase referred to the stator circuit. Ri= 0.212 R2 = 0.282 X1 = 1.055 12 X2 = 1.055 22 XM = 33.9 W The total rotational losses are 1100 W and are assumed to be constant. The core loss is lumped with the rotational losses. For a rotor slip of 4% at the rated voltage and rated frequency, a) The input power b) Peony...
A 480 V, 60 Hz, 4-pole-pair, three-phase, delta-connected induction motor has the following parameters: R1=0.42 Ω, R2=0.23 Ω, X1=0.48 Ω, X2=0.29 Ω, Xm=29.71 Ω where: R1 is the stator resistance R2 is the rotor resistance reflected in the stator; X1 is the stator leakage inductance; X2 is the rotor leakage inductance reflected in the stator; Xm is the magnetising inductance; The rotational losses are 2450 W. The motor drives a mechanical load at a speed of...