A micropipette electrode has a lumen diameter of 2 μm at its
tip. The glass wall is 0.4
μm thick and 3 mm long. The resistivity of the liquid in the tip is
10 Ωcm, and εr for the glass is
1.65.
Draw an equivalent circuit for the tip of this electrode in contact
with a saline bath (include only
the impedances associated with the tip of the electrode). Give
values for all components in the
circuit.
A micropipette electrode has a lumen diameter of 2 μm at its tip. The glass wall...
summarizr the followung info and write them in your own words and break them into different key points. 6.5 Metering Chamber: 6.5.1 The minimum size of the metering box is governed by the metering area required to obtain a representative test area for the specimen (see 7.2) and for maintenance of reasonable test accuracy. For example, for specimens incorporating air spaces or stud spaces, the metering area shall span an integral number of spaces (see 5.5). The depth of...
summatize the following info and break them into differeng key points. write them in yojr own words
apartus
6.1 Introduction—The design of a successful hot box appa- ratus is influenced by many factors. Before beginning the design of an apparatus meeting this standard, the designer shall review the discussion on the limitations and accuracy, Section 13, discussions of the energy flows in a hot box, Annex A2, the metering box wall loss flow, Annex A3, and flanking loss, Annex...