A characteristic of a digital electronic system is Accuracy of calculations are affected by ambient temperature...
A characteristic of a digital electronic system is
- Accuracy of calculations are affected by ambient temperature variations
- A current can be used to directly represent a temperature
- Measurements have an infinite resolution
- It is easy to connect an LCD to display a reading or status
Homework Answers
For a digital electronic system accuracy is not affected by ambient temperature directly. It may affect analogue electronic system.
Current will not be directly converted to temperature. It will require some extra interface with the help of some analogue electronic device.
For analogue electronic devices resolution is practically very high and ideally may be infinite.
So option d.is correct that is
It is easy to connect an LCD to display a reading or status
Add Answer to:
A characteristic of a digital electronic system is
Accuracy of calculations are affected by ambient temperature...
A characteristic of a digital system is Accuracy of calculations are affected by ambient temperature variations A current can be used to directly represent a temperature Measurements have an infinite...
A characteristic of a digital system is Accuracy of calculations are affected by ambient temperature variations A current can be used to directly represent a temperature Measurements have an infinite resolution It is easy to connect an LCD to display a reading.
Design a way of using the pushbutton to trigger an interrupt to your system. Your system,...
Design a way of using the pushbutton to trigger an interrupt to your system. Your system, upon receiving this interrupt, responds by reading and displaying the temperature in Fahrenheit degrees on the LCD display in the format of xxx.x. The system must resume displaying the digital clock. Build your circuit and include all the required information about your hardware design in your lab report. 4. Based on the hardware you designed, choose an interrupt/timer tool from mbed to update the...
Laboratory 2: Transistor circuit characteristics A. Objectives: 1. To study the basic characteris...
Laboratory 2: Transistor circuit characteristics A. Objectives: 1. To study the basic characteristics of a transistor circuit. 2. To study the bias circuit of a transistor circuit. B. Apparatus: 1. DC Power supply 2. Experimental boards and corresponding components 3. Electronic calculator (prepared by students) 4. Digital camera (prepared by students for photo taking of the experimental results) 5. Laptop computer with the software PicoScope 6 and Microsoft Word installed. 6. PicoScope PC Oscilloscope and its accessories. 7. Digital multi-meter....
please help with no 3,4,5 and 6 Thanks 1. What is standard error? Measure of statistical...
please help with no 3,4,5 and 6
Thanks
1. What is standard error? Measure of statistical accuracy of an estimate, equal to the standard deviation of the theorental distribution of a large populanon of such estimates 2. What calculation is used to describe the variation in measurements. 3. In experiment 3.2. You will be measuring out 40ml of volume. How many times will you measure 40 ml? 4. What is the difference for each time you measure out 40ml? In...
Please need serious and professional help! Hello! I am working on an "object oriented analysis and...
Please need serious and professional help!
Hello! I am working on an "object oriented analysis and design"
Project. I would really need your sincere help in creating a vision
document for this project.
The Things That I require in the "vision document"
is:
1. Product Overview
[This section provides a high level view of the product
capabilities, interfaces to other applications, and system
configurations. This section usually consists of three subsections,
as follows:
• Product
perspective
• Product
functions
• ...
Notes for lab dc02-Resistors and the Color Code will skip are Part 2 e, g: Part 4; Exercises 2, 4,5,6 an...
Notes for lab dc02-Resistors and the Color Code will skip are Part 2 e, g: Part 4; Exercises 2, 4,5,6 and 3. It is important to answer the exercises correctly in each labl you should include the appropriate prefix for the unit in the Numerical Value We will not be Volt using the Volt-Ohm meter (VOM) for this lab, so skip the parts that ask for VOM measurements. The parts we You do need to complete Exercises1 Note that in...
summatize the following info and break them into differeng key points. write them in yojr own...
summatize the following info and break them into differeng key points. write them in yojr own words
apartus
6.1 Introduction—The design of a successful hot box appa- ratus is influenced by many factors. Before beginning the design of an apparatus meeting this standard, the designer shall review the discussion on the limitations and accuracy, Section 13, discussions of the energy flows in a hot box, Annex A2, the metering box wall loss flow, Annex A3, and flanking loss, Annex...
summarizr the followung info and write them in your own words and break them into different...
summarizr the followung info and write them in your own words and break them into different key points. 6.5 Metering Chamber: 6.5.1 The minimum size of the metering box is governed by the metering area required to obtain a representative test area for the specimen (see 7.2) and for maintenance of reasonable test accuracy. For example, for specimens incorporating air spaces or stud spaces, the metering area shall span an integral number of spaces (see 5.5). The depth of...
Title: Partners Health Care Systems (PHS): Transforming Health Care Services Delivery through Information Management According to...
Title: Partners Health Care Systems (PHS): Transforming Health Care Services Delivery through Information Management According to government sources, U.S. expenditures on health care in 2009 reached nearly $2.4 trillion dollars ($2.7 trillion by the end of 2010).[1] Despite this vaunting national level of expenditure on medical treatment, death rates due to preventable errors in the delivery of health services rose to approximately 98,000 deaths in 2009.[2] To address the dual challenges of cost control and quality improvement, some have argued...
Risk management in Information Security today Everyday information security professionals are bombarded with marketing messages around...
Risk management in Information Security today Everyday information security professionals are bombarded with marketing messages around risk and threat management, fostering an environment in which objectives seem clear: manage risk, manage threat, stop attacks, identify attackers. These objectives aren't wrong, but they are fundamentally misleading.In this session we'll examine the state of the information security industry in order to understand how the current climate fails to address the true needs of the business. We'll use those lessons as a foundation...
Laboratory 2: Transistor circuit characteristics A. Objectives: 1. To study the basic characteristics of a transistor circuit. 2. To study the bias circuit of a transistor circuit. B. Apparatus: 1. DC Power supply 2. Experimental boards and corresponding components 3. Electronic calculator (prepared by students) 4. Digital camera (prepared by students for photo taking of the experimental results) 5. Laptop computer with the software PicoScope 6 and Microsoft Word installed. 6. PicoScope PC Oscilloscope and its accessories. 7. Digital multi-meter....
please help with no 3,4,5 and 6
Thanks
1. What is standard error? Measure of statistical accuracy of an estimate, equal to the standard deviation of the theorental distribution of a large populanon of such estimates 2. What calculation is used to describe the variation in measurements. 3. In experiment 3.2. You will be measuring out 40ml of volume. How many times will you measure 40 ml? 4. What is the difference for each time you measure out 40ml? In...
Please need serious and professional help!
Hello! I am working on an "object oriented analysis and design"
Project. I would really need your sincere help in creating a vision
document for this project.
The Things That I require in the "vision document"
is:
1. Product Overview
[This section provides a high level view of the product
capabilities, interfaces to other applications, and system
configurations. This section usually consists of three subsections,
as follows:
• Product
perspective
• Product
functions
• ...
Notes for lab dc02-Resistors and the Color Code will skip are Part 2 e, g: Part 4; Exercises 2, 4,5,6 and 3. It is important to answer the exercises correctly in each labl you should include the appropriate prefix for the unit in the Numerical Value We will not be Volt using the Volt-Ohm meter (VOM) for this lab, so skip the parts that ask for VOM measurements. The parts we You do need to complete Exercises1 Note that in...
summatize the following info and break them into differeng key points. write them in yojr own words
apartus
6.1 Introduction—The design of a successful hot box appa- ratus is influenced by many factors. Before beginning the design of an apparatus meeting this standard, the designer shall review the discussion on the limitations and accuracy, Section 13, discussions of the energy flows in a hot box, Annex A2, the metering box wall loss flow, Annex A3, and flanking loss, Annex...
Most questions answered within 3 hours.
-
Cranium, Inc., purchases term papers from an overseas supplier
under a continuous review system. The average...
asked 14 minutes ago -
1- What is the freezing point of pure water (in degrees
Celsius)?
2-
he molar mass...
asked 1 hour ago -
Determine the direction of the force that will act on the charge
in each of the...
asked 1 hour ago -
You purchase your daily coffee at the Chemist’s Coffeehouse and
have a choice of two cups:...
asked 3 hours ago -
Which of the following pairs of chemicals could be used to make
a buffer solution?
A.)...
asked 3 hours ago -
Problem 16-51 Sales
Activity Variance (LO 16-3)Odessa, Inc., reports the following
information concerning operations for the...
asked 4 hours ago -
Pictured on the right are thee point charges Q1 = 18.4 μC, Q2 =
-30.6 μC,...
asked 4 hours ago -
A graduate student is conducting research in psychology and
needs to obtain the IQ scores of...
asked 4 hours ago -
R2.84: There are 2 defective products in a production lot of 10.
An inspector randomly selected...
asked 6 hours ago -
Consider the following equilibrium system: COCl2(g) CO(g) +
Cl2(g) A 10.00 L evacuated flask is filled...
asked 6 hours ago -
1) What are the two distinct steps that one needs to perform
when developing a data...
asked 6 hours ago -
2) Write a C++ program that uses a class called “Degree” to
obtain the trigonometric
values...
asked 7 hours ago