A 250V DC shunt machine has an armature resistance of 0.5Ω and shunt field resistance of...
A 250V DC shunt machine has an armature resistance of 0.5Ω and shunt field resistance of 125Ω, when it is running as a motor, the current taken from the supply is 5A. Calculate the efficiency of the machine
i) On no- load
ii) As a motor when taking a current of 52A from the supply
iii) As a generator when delivering a current of 35A.
b) Distinguish between induction motor and synchronous motor.
Homework Answers
Add Answer to:
A 250V DC shunt machine has an armature resistance of 0.5Ω and
shunt field resistance of...
3. A 20kW, 250V, 1000rpm shunt excited dc motor has armature and field resistances of 0.2...
3. A 20kW, 250V, 1000rpm shunt excited dc motor has armature and field resistances of 0.2 ohm and 2002. When the motor takes 80A rated current at rated conditions. Draw the equivalent circuit and calculate induced torque at 1200rpm. Explain the starting current limiting methods for DC motors. (30 pts) 4. Explain the conditions for parallel operation of synchronous generators. A three phase, wye connected, synchronous generator is rated 150 MW, 0.85 lagging power factor, 12.6 kV, 60 Hz, and...
1. A shunt machine, while running as a generator, has an induced voltage of 260 V...
1. A shunt machine, while running as a generator, has an induced voltage of 260 V at 1200 rpm. Its armature and field resistances are 0.2 2 and 110 Q, respectively. If the machine is run as a shunt motor, it takes 4 A at 220 V (i) Draw the schematic diagram of the machine as a generator. (ii) Draw the schematic diagram of the machine as a motor (iii)At a certain load the motor takes 30 A at 220...
Problem 3: DC machine A shunt DC motor rated at V,'. 300 V, with field resistance...
Problem 3: DC machine A shunt DC motor rated at V,'. 300 V, with field resistance of Rf 600 0, armature 0.2 , resistance of R, 30.5 A (total current) when rated-load at n, consumes 916.8 rpm. Armature rotational loss (consisting of fan, friction and core loss (consisting of field resistance, armature a) Find Prot (rotational load), Pshaft and efficiency at rated load. - Assume that the rotational loss is constant and P,aft is now 50% in the case of...
A 240V DC shunt motor runs at 800rpm at no load. Determine the resistance to be...
A 240V DC shunt motor runs at 800rpm at no load. Determine the resistance to be placed in series with the field so that the motor runs at 950rpm when taking an armature current of 20A. The field resistance is 1600 and armature resistance is 0.40. Assume that the pole flux is proportional to the field current Additional Rf=
A 240V DC shunt motor runs at 800rpm at no load. Determine the resistance to be placed in series with the...
A 230 V shunt direct-current machine on no-load has a speed of 900 rpm and a supply current of 2.5 A. The machine parameters are: • Field resistance: 230 Ω • Armature resistance: 0.3 Ω • Voltage drop/...
A 230 V shunt direct-current machine on no-load has a speed of 900 rpm and a supply current of 2.5 A. The machine parameters are: • Field resistance: 230 Ω • Armature resistance: 0.3 Ω • Voltage drop/brush: 1.0 V (current independent) a) Calculate the electromagnetic torque, speed, the output power and the overall efficiency when the supply current is 35 A, assuming that the friction and wind-age torque is constant. (16 points) b) The machine operates now as generator...
A 220 V DC shunt motor has an armature resistance, Re-0.1 S2, a field resistance, Ry=100...
A 220 V DC shunt motor has an armature resistance, Re-0.1 S2, a field resistance, Ry=100 12, and negligible rotational losses. Under certain load conditions, the shunt motor runs at 1600 rpm while drawing a total current, I = 100 A. Determine: a. the output power of the motor; b. the output torque in N-m; and, c. the efficiency Without making any changes to the applied voltage or the field, the motor operates with a new M mechanical load that...
1. A 300 V compound motor has armature resistance 0.18 Ω, series field resistance 0.3 Ω...
1. A 300 V compound motor has armature resistance 0.18 Ω, series field resistance 0.3 Ω and shunt field resistance 100 Ω. The rotational losses are 200 W. On full load the line current is 25 A and the motor runs at 1800 rpm. Determine: (i) the developed mechanical power (ii) the output power (iii) the output torque (iv) the efficiency at full load 2. A 120 V series motor has 0.2 Ω field resistance. On full load, the line...
A d.c shunt motor has armature and field resistance of 0.2 Ω and 110 Ω respectively....
A d.c shunt motor has armature and field resistance of 0.2 Ω and 110 Ω respectively. The motor is running at 1200 rpm and drawing 15 A from 110 V supply. If the field resistance is decreased by 10%, calculate the new steady state armature current and speed of the motor. Assume the load torque to be constant
A d.c shunt motor has armature and field resistance of 0.2 Ω and 110 Ω respectively....
A d.c shunt motor has armature and field resistance of 0.2 Ω and 110 Ω respectively. The motor is running at 1200 rpm and drawing 15 A from 110 V supply. If the field resistance is decreased by 10%, calculate the new steady state armature current and speed of the motor. Assume the load torque to be constant.
A DC 220V shunt motor draws a no load current of 3.5A.Its armature and shunt resistances...
A DC 220V shunt motor draws a no load current of 3.5A.Its armature and shunt resistances are: 0.25 and 440 ohms. At full load it draws a current of 65.5 A . Find the efficiency of machine at full load. pleas SHOW ALL WORK... i really need to learn it THANKS
3. A 20kW, 250V, 1000rpm shunt excited dc motor has armature and field resistances of 0.2 ohm and 2002. When the motor takes 80A rated current at rated conditions. Draw the equivalent circuit and calculate induced torque at 1200rpm. Explain the starting current limiting methods for DC motors. (30 pts) 4. Explain the conditions for parallel operation of synchronous generators. A three phase, wye connected, synchronous generator is rated 150 MW, 0.85 lagging power factor, 12.6 kV, 60 Hz, and...
1. A shunt machine, while running as a generator, has an induced voltage of 260 V at 1200 rpm. Its armature and field resistances are 0.2 2 and 110 Q, respectively. If the machine is run as a shunt motor, it takes 4 A at 220 V (i) Draw the schematic diagram of the machine as a generator. (ii) Draw the schematic diagram of the machine as a motor (iii)At a certain load the motor takes 30 A at 220...
Problem 3: DC machine A shunt DC motor rated at V,'. 300 V, with field resistance of Rf 600 0, armature 0.2 , resistance of R, 30.5 A (total current) when rated-load at n, consumes 916.8 rpm. Armature rotational loss (consisting of fan, friction and core loss (consisting of field resistance, armature a) Find Prot (rotational load), Pshaft and efficiency at rated load. - Assume that the rotational loss is constant and P,aft is now 50% in the case of...
A 240V DC shunt motor runs at 800rpm at no load. Determine the resistance to be placed in series with the field so that the motor runs at 950rpm when taking an armature current of 20A. The field resistance is 1600 and armature resistance is 0.40. Assume that the pole flux is proportional to the field current Additional Rf=
A 240V DC shunt motor runs at 800rpm at no load. Determine the resistance to be placed in series with the...
A 220 V DC shunt motor has an armature resistance, Re-0.1 S2, a field resistance, Ry=100 12, and negligible rotational losses. Under certain load conditions, the shunt motor runs at 1600 rpm while drawing a total current, I = 100 A. Determine: a. the output power of the motor; b. the output torque in N-m; and, c. the efficiency Without making any changes to the applied voltage or the field, the motor operates with a new M mechanical load that...
Most questions answered within 3 hours.
-
If the K b of a weak base is 6.3 × 10 − 6 , what...
asked 13 seconds ago -
Which of the following is the minimum amount of moles of NaOH
that must be added...
asked 3 minutes ago -
Stories about organizational ________ provide important clues
about cultural values and norms.
a. myths
b. heroes...
asked 5 minutes ago -
Explain the criteria used in selecting a target market
BUS220 Retail Management, thank you!
asked 7 minutes ago -
Convert/Calculate the following:
Determine the identity of an elemental gas if 4.55 L weighing
35.4g, under...
asked 10 minutes ago -
Consider the equilibrium C(s)+ CO2(g) ⇌2 CO(g)
A 2.0 L flask contains a mixture of 0.10...
asked 9 minutes ago -
MATLAB
Part 1 – randFloatValue.m This function accepts two numbers,
lower and upper, and returns a...
asked 15 minutes ago -
You have been asked to hide prizes around your house for your
3-year old nephew. His...
asked 16 minutes ago -
Ammonia will decompose into nitrogen and hydrogen at high
temperature. An industrial chemist studying this reaction...
asked 23 minutes ago -
10. Complete the table below
only using hexadecimal numbers:
AL CODE
EBX
EAX
[EAX]
mov eax,...
asked 41 minutes ago -
trust is best established through the combination of ------and
------- .
1. magnanimity and justice
2....
asked 55 minutes ago -
Blood pressure is normally taken on the upper arm at the level
of the heart. Suppose,...
asked 54 minutes ago