Water is needed to supply a canal system, which may require up to 30m3 s -1...
Water is needed to supply a canal system, which may require up to 30m3 s -1 the channel is 2 metres wide calculate the depth of flow at maximum given that the Manning n value of this stretch of the channel is 0.02.
Slope= 0.1
Homework Answers
Add Answer to:
Water is needed to supply a canal system, which may require up
to 30m3 s -1...
Water flows at 11 m3/s in a rectangular channel of width 5 m. The slope of...
Water flows at 11 m3/s in a rectangular channel of width 5 m. The slope of the channel is 0.001 and the Manning roughness coefficient is equal to 0.035. If the depth of flow at a selected section is 2 m, calculate the upstream depth at 500 m from the selected section using the standard step method
7. Given the water surface (M2) profile, channel slope is MILD. Drawdown of the water surface occ...
7. Given the water surface (M2) profile, channel slope is MILD. Drawdown of the water surface occurs with approach to the free overfall For a 90-degree v-notch channel geometry, bed slope 0.0001, a Manning-n of 0.01 and a flow of 0.425 m'/s find (a) the Froude number and flow regime and (b) Critical depth near the free overfall (c) How far upstream does the flow become uniform (d) What is the water depth at this upstream location? M2 NDL DL...
Q2) A canal of trapezoidal section has bed width of 8 m and bed slope of...
Q2) A canal of trapezoidal section has bed width of 8 m and bed slope of 1 in 4000. If the depth of flow is 2.4 m and side slopes of the chamel are 1 horizontal to 3 vertical, determine the average flow velocity and the discharge carried by the channel. Also compute the average shear stress at the channel boundary. Take value of Chezy's constant = 55. Q3) 6.11. A power canal of trapezoidal section has to be excavated...
Water flows in a 100 ft wide rectangular channel at flow rate = 300 ft3/sec
Water flows in a 100 ft wide rectangular channel at flow rate = 300 ft3/sec. Manning's n = 0.015 and the bottom slope = 0.002. Calculate/answer the following: a. the uniform (normal) flow depth assuming the channel is wide and shallow. b. the critical flow depth. c. the flow depth upstream of a hydraulic jump with downstream depth = normal depth. d. the type of channel slope at the given normal depth: mild, critical, or steep (select one). f. the basis for your answer in...
In a rectangular channel, water flows at a flow rate of 15 m3 / s. The...
In a rectangular channel, water flows at a flow rate of 15 m3 / s. The width of the canal is 4.0 m and the water depth is 2.5 m. Without causing the water in the blast to swell: a) If the channel is narrowed without raising the channel base, what is the minimum value that the base width can take? b) Find the maximum threshold height that can be placed on the base without changing the channel width. c)...
A rectangular river channel 5.0m wide carries water at a depth of 1.2m. The slope of...
A rectangular river channel 5.0m wide carries water at a depth of 1.2m. The slope of the channel is 1 in 400. The channel has a bed covered with stones. Using the n value of 0.03(s/m1/3) calculate the discharge in the channel using Manning’s equation
Water flows down a rectangular channel that has a width of 2.2 m, a Manning's n...
Water flows down a rectangular channel that has a width of 2.2 m, a Manning's n of 0.019 and a slope of 1 in 200. Calculate the discharge in the channel when the depth of flow is 0.5 m, 1.0 m, 2.0 m, and 4.0 m. Plot a graph of depth against discharge and comment on its shape, [10 marks] A wide channel has a Manning's number = 0.021, a longitudinal bed slope of 1:250 and conveys 0.XX m3/s/m of...
2. (10 pts) A municipality is designing an open storm drain channel in the form of an in verted t...
2. (10 pts) A municipality is designing an open storm drain channel in the form of an in verted trapezoid. It has a width of L at its base, is symmetric about the vertical, and its sides are at an angle θ to the horizontal (Fig. 2). Assuming the Manning formula, i.e grating for pedestrians where O-v3o./n is fired for this prob- lem (because material and slope are already known), determine Q as a function of Co, L, 0, and...
Question 10 please my teachers please Question 9. A rectangular river channel 5.0m wide carries water...
Question 10 please my teachers please
Question 9. A rectangular river channel 5.0m wide carries water at a depth of 1.2m. The slope of the channel is 1 in 400. The channel has a bed covered with stones. Using the n value of 0.03(s/m 1/3) calculate the discharge in the channel using Manning's equation. (10 marks) Question 10. With reference to a cross section of a particular site, discuss the fundamental principles of groundwater movement and show the influence of...
A 4-m high dam with a slope of 8:1 ?V) has been proposed to ensure steady...
A 4-m high dam with a slope of 8:1 ?V) has been proposed to ensure steady water levels in a rectangular channel with a width of 5 m, a bottom slope of 0.2%, a Manning's n of 0.02, and discharge rate of 10 m3/s as shown below. proposed aim So-0.002 1. (15 points) Sketch out the gradually varied flow profiles for the water surface around the proposed dam by hand a. Determine the critical depth for the channel b. Estimate...
Water flows at 11 m3/s in a rectangular channel of width 5 m. The slope of the channel is 0.001 and the Manning roughness coefficient is equal to 0.035. If the depth of flow at a selected section is 2 m, calculate the upstream depth at 500 m from the selected section using the standard step method
7. Given the water surface (M2) profile, channel slope is MILD. Drawdown of the water surface occurs with approach to the free overfall For a 90-degree v-notch channel geometry, bed slope 0.0001, a Manning-n of 0.01 and a flow of 0.425 m'/s find (a) the Froude number and flow regime and (b) Critical depth near the free overfall (c) How far upstream does the flow become uniform (d) What is the water depth at this upstream location? M2 NDL DL...
Q2) A canal of trapezoidal section has bed width of 8 m and bed slope of 1 in 4000. If the depth of flow is 2.4 m and side slopes of the chamel are 1 horizontal to 3 vertical, determine the average flow velocity and the discharge carried by the channel. Also compute the average shear stress at the channel boundary. Take value of Chezy's constant = 55. Q3) 6.11. A power canal of trapezoidal section has to be excavated...
Water flows down a rectangular channel that has a width of 2.2 m, a Manning's n of 0.019 and a slope of 1 in 200. Calculate the discharge in the channel when the depth of flow is 0.5 m, 1.0 m, 2.0 m, and 4.0 m. Plot a graph of depth against discharge and comment on its shape, [10 marks] A wide channel has a Manning's number = 0.021, a longitudinal bed slope of 1:250 and conveys 0.XX m3/s/m of...
2. (10 pts) A municipality is designing an open storm drain channel in the form of an in verted trapezoid. It has a width of L at its base, is symmetric about the vertical, and its sides are at an angle θ to the horizontal (Fig. 2). Assuming the Manning formula, i.e grating for pedestrians where O-v3o./n is fired for this prob- lem (because material and slope are already known), determine Q as a function of Co, L, 0, and...
Question 10 please my teachers please
Question 9. A rectangular river channel 5.0m wide carries water at a depth of 1.2m. The slope of the channel is 1 in 400. The channel has a bed covered with stones. Using the n value of 0.03(s/m 1/3) calculate the discharge in the channel using Manning's equation. (10 marks) Question 10. With reference to a cross section of a particular site, discuss the fundamental principles of groundwater movement and show the influence of...
A 4-m high dam with a slope of 8:1 ?V) has been proposed to ensure steady water levels in a rectangular channel with a width of 5 m, a bottom slope of 0.2%, a Manning's n of 0.02, and discharge rate of 10 m3/s as shown below. proposed aim So-0.002 1. (15 points) Sketch out the gradually varied flow profiles for the water surface around the proposed dam by hand a. Determine the critical depth for the channel b. Estimate...
Most questions answered within 3 hours.
-
Questions of this part analyze the students’ understanding in
analyzing the given scenario and practical skills...
asked 53 seconds ago -
#C++
Write a function, named sortByCourseNumber, that takes a
reference to a vector of string (like...
asked 1 minute ago -
A
cylunder of titanium (length = 5.00cm, diameter = 1.20 cm) has a
mass of 25.5...
asked 1 hour ago -
1) Answer Each question with 1-2 Sentences:
a) How can we use the continuity and change...
asked 1 hour ago -
5. What is the decimal equivalent of the largest binary
integer that can be obtained with...
asked 1 hour ago -
Why is the magnitude of the Type Ia supernova always the same
(-19.6)?
asked 1 hour ago -
5. You are a quality control engineer and you are
asked to analyze the lifetime (in hours)...
asked 2 hours ago -
How many ways can 2 people be chosen and arranged in a straight
line if there...
asked 3 hours ago -
(Problem 1d). Leandro has 16 hours per day that he can allocate
to work or leisure....
asked 4 hours ago -
Morganton Company
makes one product and it provided the following information to help
prepare the master...
asked 4 hours ago -
2Al + 3Cl2 --> 2AlCl3
If one mole Al is reacted w two moles Cl2, how...
asked 5 hours ago -
1. You will see some trends in the movement of each currency vs.
the US Dollar....
asked 5 hours ago