Homework Answers
Add Answer to:
A T-beam with a simply supported span of 6m is subjected to a concentrated live load as shown in ...
A simply supported reinforced concrete beam of 8 m span is subjected to uniformly distributed load...
A simply supported reinforced concrete beam of 8 m span is subjected to uniformly distributed load as shown in Figure 3. The following data are given: The ultimate load, wu is 60 kN/m; characteristic strength of concrete, fck is 30 N/mm²; characteristic strength of reinforcement, fyk is 500 N/mm2. The effective depth, d is 650 mm. Take the link diameter, w as 10 mm, main bar diameter, o as 20 mm and concrete cover as 30 mm. Design the shear...
5. Determine the mid-span short-term deflection of a simply supported beam with the section shown in...
5. Determine the mid-span short-term deflection of a simply supported beam with the section shown in Figure Q5. Design data: Concrete strength: fcu 30 MPa. Area of tensile steel reinforcement: As 1500 mm Area of compressive steel reinforcement: A,-1500 mm2 Instantaneous static modulus of elasticity of concrete = 25GPa. Span -8.0 m Loading: Dead load 5.0 kN/m (uniformly distributed load); Live load 5.0 kN/m (uniformly distributed load) (Hint: the height of neutral axis of the mid-span section under the service...
Design a doubly R/F beam of size 300mmX700mm(overall). The beam is simply supported of span 6m...
Design a doubly R/F beam of size 300mmX700mm(overall). The beam is simply supported of span 6m and subjected to total u.d.l. of 80kN/m on entire span. Take M20 concrete grade and Fe415 steel grade.
Q1. (20 pts) A simply supported beam is subjected to a concentrated load P 10 kN...
Q1. (20 pts) A simply supported beam is subjected to a concentrated load P 10 kN and an anticlockwise couple M 10kN m acting at the quarter point, as shown in Fig. Q1. Draw the shear and moment diagrams for this beam P 10kN M 10kN m F A m 2m m Fig. Q1
all parts A simply supported concrete beam is to be designed to span 8m. The beam...
all parts
A simply supported concrete beam is to be designed to span 8m. The beam is required to resist a dead load of 40 kN/m (which includes an allowance for self-weight) and an imposed load of 20 kN/m Calculate the ultimate design load that the beam will be required to resist and hence calculate the ultimate design moment. (10 Marks] b) Choose an appropriate depth and width of the beam. [5 marks] c) Calculate an appropriate amount of reinforcing...
14.54 A simply supported rectangular beam with a span of 6 ft has a concentrated load of 4.1 kip ...
14.54 A simply supported rectangular beam with a span of 6 ft has a concentrated load of 4.1 kip at midspan. Se- lect the lightest rectangular wood beam that can safely support the loads (neglect the weight of the beam). The allowable stress in bending is 1200 psi and in shear parallel to the grain 100 psi
14.54 A simply supported rectangular beam with a span of 6 ft has a concentrated load of 4.1 kip at midspan. Se- lect...
A 26.0 ft. simply supported beam is subjected to factored uniformly distributed load of wa equal ...
A 26.0 ft. simply supported beam is subjected to factored uniformly distributed load of wa equal to 6.0 kips/t. Beam properties are as follows: b-14 in, d-24 in, 4,000 psi (normal-weight concrete) and fy -60,000 psi. Design shear reinforcement for the entire beam (you can use symmetry if applicable). Use two different spacings over the beam length to come up with economical design. Perform all necessary checks and calculations. Draw final design for shear ma reinforcement indicating distribution (i.e, lengths,...
The Beam shown will be subjected to a concentrated live load of 100kN, a uniformly distributed...
The
Beam shown will be subjected to a concentrated live load of 100kN,
a uniformly distributed live load of 50kN/m and a uniformly
distributed dead load of 20kN/m.
45.) determine the maximum reaction at B
46.) determine the maximum positive shear at C
47.) determine the maximum negative moment at B
The beam shown will be subjected to a concentrated live load of 100 KN, a uniformly distributed live load of 50 kN/m and a uniformly distributed dead load of...
A simply supported inverted T-beam has a clear span ln = 32 ft and is subjected...
A simply supported inverted T-beam has a clear span ln = 32 ft
and is subjected to its own weight and the point loads P as shown.
The point load P consists of a service dead load of 16 kips and a
service live load of 28kips. Design #3 vertical stirrups for the
beam (ignore any torsional effects). Assume d = 41.5 in., ƒc’ =
4,000 psi, and ƒy = 60,000 psi.
1. A simply supported inverted T-beam has a...
The cantilever beam shown in the figure is subjected to a concentrated load at point B....
The cantilever beam shown in the figure is subjected to a concentrated load at point B. The stresses acting at point H on the beam are to be determined. H Cross section For this analysis, use the following values: Beam and Load. a = 1.75 m b=0.30 m @= 60 degrees P = 25 KN Cross-sectional Dimensions d=250 mm bp = 125 mm ty=7 mm tw = 7 mm C= 30 mm (Note: The load P applied at Bacts in...
A simply supported reinforced concrete beam of 8 m span is subjected to uniformly distributed load as shown in Figure 3. The following data are given: The ultimate load, wu is 60 kN/m; characteristic strength of concrete, fck is 30 N/mm²; characteristic strength of reinforcement, fyk is 500 N/mm2. The effective depth, d is 650 mm. Take the link diameter, w as 10 mm, main bar diameter, o as 20 mm and concrete cover as 30 mm. Design the shear...
5. Determine the mid-span short-term deflection of a simply supported beam with the section shown in Figure Q5. Design data: Concrete strength: fcu 30 MPa. Area of tensile steel reinforcement: As 1500 mm Area of compressive steel reinforcement: A,-1500 mm2 Instantaneous static modulus of elasticity of concrete = 25GPa. Span -8.0 m Loading: Dead load 5.0 kN/m (uniformly distributed load); Live load 5.0 kN/m (uniformly distributed load) (Hint: the height of neutral axis of the mid-span section under the service...
Q1. (20 pts) A simply supported beam is subjected to a concentrated load P 10 kN and an anticlockwise couple M 10kN m acting at the quarter point, as shown in Fig. Q1. Draw the shear and moment diagrams for this beam P 10kN M 10kN m F A m 2m m Fig. Q1
all parts
A simply supported concrete beam is to be designed to span 8m. The beam is required to resist a dead load of 40 kN/m (which includes an allowance for self-weight) and an imposed load of 20 kN/m Calculate the ultimate design load that the beam will be required to resist and hence calculate the ultimate design moment. (10 Marks] b) Choose an appropriate depth and width of the beam. [5 marks] c) Calculate an appropriate amount of reinforcing...
14.54 A simply supported rectangular beam with a span of 6 ft has a concentrated load of 4.1 kip at midspan. Se- lect the lightest rectangular wood beam that can safely support the loads (neglect the weight of the beam). The allowable stress in bending is 1200 psi and in shear parallel to the grain 100 psi
14.54 A simply supported rectangular beam with a span of 6 ft has a concentrated load of 4.1 kip at midspan. Se- lect...
A 26.0 ft. simply supported beam is subjected to factored uniformly distributed load of wa equal to 6.0 kips/t. Beam properties are as follows: b-14 in, d-24 in, 4,000 psi (normal-weight concrete) and fy -60,000 psi. Design shear reinforcement for the entire beam (you can use symmetry if applicable). Use two different spacings over the beam length to come up with economical design. Perform all necessary checks and calculations. Draw final design for shear ma reinforcement indicating distribution (i.e, lengths,...
The
Beam shown will be subjected to a concentrated live load of 100kN,
a uniformly distributed live load of 50kN/m and a uniformly
distributed dead load of 20kN/m.
45.) determine the maximum reaction at B
46.) determine the maximum positive shear at C
47.) determine the maximum negative moment at B
The beam shown will be subjected to a concentrated live load of 100 KN, a uniformly distributed live load of 50 kN/m and a uniformly distributed dead load of...
A simply supported inverted T-beam has a clear span ln = 32 ft
and is subjected to its own weight and the point loads P as shown.
The point load P consists of a service dead load of 16 kips and a
service live load of 28kips. Design #3 vertical stirrups for the
beam (ignore any torsional effects). Assume d = 41.5 in., ƒc’ =
4,000 psi, and ƒy = 60,000 psi.
1. A simply supported inverted T-beam has a...
The cantilever beam shown in the figure is subjected to a concentrated load at point B. The stresses acting at point H on the beam are to be determined. H Cross section For this analysis, use the following values: Beam and Load. a = 1.75 m b=0.30 m @= 60 degrees P = 25 KN Cross-sectional Dimensions d=250 mm bp = 125 mm ty=7 mm tw = 7 mm C= 30 mm (Note: The load P applied at Bacts in...
Most questions answered within 3 hours.
-
Write a program to solve the Josephus problem, with the following
modification:
Sample Input:
./a.out n...
asked 1 hour ago -
At the start of a CD it is spinning at a rate of 525 rpm
(revolutions...
asked 2 hours ago -
4. Without doing any calculations, predict whether the observed
∆T would increase, decrease or remain the...
asked 3 hours ago -
Based on the range, which of the following sets of scores has
the greatest variability? 3,...
asked 4 hours ago -
Ripples in a pond travel at a velocity of 3 m/s with one peak
passing a...
asked 4 hours ago -
A man stands on the roof of a building of height 13.0 mm and
throws a...
asked 4 hours ago -
The extent to which assets are financed by borrowed funds and
other liabilities is indicated by:...
asked 5 hours ago -
Explain in detail
Germany is the fifth largest economy
explain what goods and services Germany specializes...
asked 6 hours ago -
The density of platinum is 21.45 g/mL. If a cube of platinum
with a mass of...
asked 6 hours ago -
Accounts Receivable
Sales
A/R Posting
Extended Sales Invoice
Packing Slip
Compare invoice to packing slip 2...
asked 6 hours ago -
Michaella, age 23, is a full-time law student and is claimed by
her parents as a...
asked 6 hours ago -
Why are polymers not typically casted into products?
asked 6 hours ago