An automatic production machine requires a com contact with a cam that rotates at a speeds up to ...
An automatic production machine requires a com contact with a cam that rotates at a speeds up to 1800 rpm. When installed, the spring force is to vary between 150 and 600 N while the spring height varies over a rang available supply of 4.5 mm diameter shot peened wire to be used. Clash allowance (difference in spring length between maximum load and spring solid positions) is to be 2.5 pression coil spring to keep a follower in Determine appropriate values for D, N, Ls and Lo. Determine the likelihood of the spring's buckling and the likelihood of encountering spring surge. Determine the approximate factor of safety during normal operation. 1. 2. 3. Write a project report to document your work. Design notes: 1. 2. 3. Material: music wire A228; Design factor ns 1; Use Sines fatigue criterion.
An automatic production machine requires a com contact with a cam that rotates at a speeds up to 1800 rpm. When installed, the spring force is to vary between 150 and 600 N while the spring height varies over a rang available supply of 4.5 mm diameter shot peened wire to be used. Clash allowance (difference in spring length between maximum load and spring solid positions) is to be 2.5 pression coil spring to keep a follower in Determine appropriate values for D, N, Ls and Lo. Determine the likelihood of the spring's buckling and the likelihood of encountering spring surge. Determine the approximate factor of safety during normal operation. 1. 2. 3. Write a project report to document your work. Design notes: 1. 2. 3. Material: music wire A228; Design factor ns 1; Use Sines fatigue criterion.