A hollow tube with a rectangular cross-section has external dimensions of 0.5 in by 1 in and a wa...
(BEKP 2453) PART B ANSWER ONE QUESTION ONLY OCESTION 4 A point charge of 14 uC is located at (2. 5. 9). If V = 12 kV at (12,-5, 4), point A is at 3, 2, 6), and point B is at (1, 5, 7) calculate the potential difference VAB caused by the point charge. (8 marks) A hollow cylindrical cable made of brass (o-1.5 x 10' S/m) has a radius of 2 cm and thickness of 0.3 cm. A...
Problem (1) A long solid metal conducting cylinder with radius a is coaxial with a long, hollow, metal conducting tube of greater radius b. The inner cylinder of radius a is positively charged with a positive charge per unit length of magnitude λ (C/m , and there is an equal negative charge per unit length on the outer cylinder of radius b. The region between the two cylinders is filled with an insulating material of dielectric constant K Please use...
Consider a cylindrical capacitor like that shown in Fig. 24.6. Let d = rb − ra be the spacing between the inner and outer conductors. (a) Let the radii of the two conductors be only slightly different, so that d << ra. Show that the result derived in Example 24.4 (Section 24.1) for the capacitance of a cylindrical capacitor then reduces to Eq. (24.2), the equation for the capacitance of a parallel-plate capacitor, with A being the surface area of...
summatize the following info and break them into differeng key points. write them in yojr own words apartus 6.1 Introduction—The design of a successful hot box appa- ratus is influenced by many factors. Before beginning the design of an apparatus meeting this standard, the designer shall review the discussion on the limitations and accuracy, Section 13, discussions of the energy flows in a hot box, Annex A2, the metering box wall loss flow, Annex A3, and flanking loss, Annex...
summarizr the followung info and write them in your own words and break them into different key points. 6.5 Metering Chamber: 6.5.1 The minimum size of the metering box is governed by the metering area required to obtain a representative test area for the specimen (see 7.2) and for maintenance of reasonable test accuracy. For example, for specimens incorporating air spaces or stud spaces, the metering area shall span an integral number of spaces (see 5.5). The depth of...