Homework Answers
Add Answer to:
Pipes in the figure shown.Givenp Find the flow rate distribution in the CASTIRON: the following d...
4. Figure 2 shows two reservoirs which are connected by three pipes of different diameters. The...
4. Figure 2 shows two reservoirs which are connected by three pipes of different diameters. The length and diameter of each pipe are given in Table 1. The flow rate in the pipeline is 55 Ls. The entrance and exit from the pipes are sharp and the change between the pipelines in the cross sections is sudden. Assume the friction factor, /for the pipes as 0.01. (a) Analyse all the head losses which occur, giving an expression for each. (7...
A pipe caring water with volumetric flow rate 0.6 m3/s branches into five pipes. The first...
A pipe caring water with volumetric flow rate 0.6 m3/s branches into five pipes. The first pipe is (diameter=33Cm and velocity=1.3m/s), the second pipe is (diameter=32Cm), the third pipe is (diameter=26Cm and velocity=1.8m/s), the fourth pipe is (diameter=28Cm and velocity=2.2m/s), while the fifth pipe is (diameter=25Cm and velocity=2m/s). Find the velocity in the second pipe. Density of water=1000kg/m3. Select one: O a. 1.982 m/s Ob. 1.883 m/s O c. 2.014 m/s O d. 2.121 m/s O e. 2.231 m/s
Two reservoirs are joined by three pipes in series; Pipe 1 is 300 mm in diameter...
Two reservoirs are joined by three pipes in series; Pipe 1 is 300 mm in diameter and 300 m long and has λ = 0.019; Pipe 2 is 200 mm in diameter, 150 m long and has λ = 0.021; and Pipe 3 is 250 mm in diameter and 250 m long and has λ = 0.020. They are conveying water at 15oC. If the height difference between the top water levels is 10 m, find the flow rate ignoring...
Water flows through the pipe in the figure below and exits to the atmosphere at the...
Water flows through the pipe in the figure below and exits to the atmosphere at the right end of section C. The diameter of the pipe is 2.12 cm at A, 4.24 cm at B, and 0.880 cm at C. The gauge pressure in the pipe at the center of section A is 1.25 atm and the flow rate is 0.856 L/s. The vertical pipes are open to the air. Find the level (above the flow midline as shown) of...
Problem The relation between pressure drop and flow rate of laminar flows in a pipe is given by l...
Problem The relation between pressure drop and flow rate of laminar flows in a pipe is given by l bar 50 m 20° 128u dz PS Flow rate Q is the product of the average velocity and the cross-sectional area of the pipe What is the pressure needed to drive a viscous oil flow upslope through a 12 cm diameter pipe? The length of the pipe is 50 meters. The slope is 20°. At the end of the pipe, the...
Find the flow rate Q when the flow velocity distribution u (m / s) in the...
Find the flow rate Q when the flow velocity distribution u (m /
s) in the pipeline with radius R (m) as shown in the figure below
is expressed by the following equation as a function of the
distance y (m) from the inner wall surface. However, U is the
maximum flow velocity (m / s) in the central axis of the pipeline,
and the flow velocity distribution u is symmetrical with respect to
the central axis of the pipeline,...
A pipe network is given below (Figure 2). All pipes are 1 km long, and 500...
A pipe network is given below (Figure 2). All pipes are 1 km long, and 500 mm in diameter, with friction factor of 0 018 Determine the following. a) The value of Q (3) b) The correct flows in each pipe (using the Hardy-cross method) after the (17) first iteration [Hint: Assume Qo for pipe AB 105 L/s] c) The pressure heads at each node if the pressure head at reservoir A is 80 m. The elevation of each node...
Hydraulics problem Problem w2: 130 points) The system in the following figure consists of three reservoirs...
Hydraulics problem
Problem w2: 130 points) The system in the following figure consists of three reservoirs A, B, and C and the reservoirs are connected by pipes AJ, BJ, and C at junction J. The data for the reservoirs and pipes are given as FE 20 E 200 1800001504 o 2000 024 400 1000 012 ,tsu に (a) Find the Area A. K value for each of the pipes where, K - (6 points) (b) Find the elevation of reservoir...
fluid mechanics ASAP please Problem 4 (50 points) Water is discharged from a reservoir at a rate of 18.103 m3/s using two horizontal cast iron pipes connected in series and a pump between them. T...
fluid mechanics
ASAP please
Problem 4 (50 points) Water is discharged from a reservoir at a rate of 18.103 m3/s using two horizontal cast iron pipes connected in series and a pump between them. The first pipe is 20 m long and has a 6-cm diameter, while the second pipe is 35 m long and has a 4-cm diameter. The water level in the reservoir is 30 m above the centerline of the pipe. The pipe entrance is sharp-edged. Losses...
Problem 4 (50 points) water is discharged from a reservoir at a rate of 18.103 m2/s using two horizontal cast iron pipes nected in series and a pump between them. The first pipe is 20 m long and...
Problem 4 (50 points) water is discharged from a reservoir at a rate of 18.103 m2/s using two horizontal cast iron pipes nected in series and a pump between them. The first pipe is 20 m long and has a 6-cm diameter, while the second pipe is 35 m long and has a 4-cm diameter. The water level in the reservoir is 30 m above the centerline of the pipe. The pipe entrance is sharp-edged. Losses associated with the connection...
4. Figure 2 shows two reservoirs which are connected by three pipes of different diameters. The length and diameter of each pipe are given in Table 1. The flow rate in the pipeline is 55 Ls. The entrance and exit from the pipes are sharp and the change between the pipelines in the cross sections is sudden. Assume the friction factor, /for the pipes as 0.01. (a) Analyse all the head losses which occur, giving an expression for each. (7...
A pipe caring water with volumetric flow rate 0.6 m3/s branches into five pipes. The first pipe is (diameter=33Cm and velocity=1.3m/s), the second pipe is (diameter=32Cm), the third pipe is (diameter=26Cm and velocity=1.8m/s), the fourth pipe is (diameter=28Cm and velocity=2.2m/s), while the fifth pipe is (diameter=25Cm and velocity=2m/s). Find the velocity in the second pipe. Density of water=1000kg/m3. Select one: O a. 1.982 m/s Ob. 1.883 m/s O c. 2.014 m/s O d. 2.121 m/s O e. 2.231 m/s
Water flows through the pipe in the figure below and exits to the atmosphere at the right end of section C. The diameter of the pipe is 2.12 cm at A, 4.24 cm at B, and 0.880 cm at C. The gauge pressure in the pipe at the center of section A is 1.25 atm and the flow rate is 0.856 L/s. The vertical pipes are open to the air. Find the level (above the flow midline as shown) of...
Problem The relation between pressure drop and flow rate of laminar flows in a pipe is given by l bar 50 m 20° 128u dz PS Flow rate Q is the product of the average velocity and the cross-sectional area of the pipe What is the pressure needed to drive a viscous oil flow upslope through a 12 cm diameter pipe? The length of the pipe is 50 meters. The slope is 20°. At the end of the pipe, the...
Find the flow rate Q when the flow velocity distribution u (m /
s) in the pipeline with radius R (m) as shown in the figure below
is expressed by the following equation as a function of the
distance y (m) from the inner wall surface. However, U is the
maximum flow velocity (m / s) in the central axis of the pipeline,
and the flow velocity distribution u is symmetrical with respect to
the central axis of the pipeline,...
A pipe network is given below (Figure 2). All pipes are 1 km long, and 500 mm in diameter, with friction factor of 0 018 Determine the following. a) The value of Q (3) b) The correct flows in each pipe (using the Hardy-cross method) after the (17) first iteration [Hint: Assume Qo for pipe AB 105 L/s] c) The pressure heads at each node if the pressure head at reservoir A is 80 m. The elevation of each node...
Hydraulics problem
Problem w2: 130 points) The system in the following figure consists of three reservoirs A, B, and C and the reservoirs are connected by pipes AJ, BJ, and C at junction J. The data for the reservoirs and pipes are given as FE 20 E 200 1800001504 o 2000 024 400 1000 012 ,tsu に (a) Find the Area A. K value for each of the pipes where, K - (6 points) (b) Find the elevation of reservoir...
fluid mechanics
ASAP please
Problem 4 (50 points) Water is discharged from a reservoir at a rate of 18.103 m3/s using two horizontal cast iron pipes connected in series and a pump between them. The first pipe is 20 m long and has a 6-cm diameter, while the second pipe is 35 m long and has a 4-cm diameter. The water level in the reservoir is 30 m above the centerline of the pipe. The pipe entrance is sharp-edged. Losses...
Problem 4 (50 points) water is discharged from a reservoir at a rate of 18.103 m2/s using two horizontal cast iron pipes nected in series and a pump between them. The first pipe is 20 m long and has a 6-cm diameter, while the second pipe is 35 m long and has a 4-cm diameter. The water level in the reservoir is 30 m above the centerline of the pipe. The pipe entrance is sharp-edged. Losses associated with the connection...
Most questions answered within 3 hours.
-
A college student is employed as a door-to-door newspaper
salesman. Historical data suggests that the student...
asked 51 minutes ago -
MATLAB HW 11 problem using Switch Case and Input commands
Write a script file that calculates...
asked 36 minutes ago -
Considering gravitational time dilation, calculate the time that
passes in Earth’s surface while 1 hour passes...
asked 1 hour ago -
Minitab Problem: Take the Lake Hume June rainfall data and find
use the processes outlined in...
asked 2 hours ago -
X Company is trying to decide whether to continue using old
equipment to make Product A...
asked 2 hours ago -
IN PYTHON ONLY !! Program 2: Re-work
program #5 (WeeklyHours) from the previous assignment such that...
asked 2 hours ago -
The average length of time between arrivals at a turnpike
toll-booth is 26 seconds. What is...
asked 4 hours ago -
(a) A piston at 6.1 atm contains a gas that occupies a volume of
3.5 L....
asked 5 hours ago -
Please answer true or false. Words
cannot be changed or added in to make it true...
asked 5 hours ago -
An empty test tube weighs 15.923 grams. Then,
MgCl2•6H2O is added into the test tube. After...
asked 5 hours ago -
Assume memory access is 10 units of time and disk access is
10000 units of time....
asked 5 hours ago -
1. Are all good samples random?
2. Magazines often report surveys giving statistics such as “63%...
asked 6 hours ago