Homework Answers
Add Answer to:
A 30 hp, 240 V, 1150 rpm de shunt motor operating at rated conditions has an efficiency of 88.5%. The armature circuit resistance and field circuit resistance are 0.096 Ω and 936 Ω respectively. Calc...
3. A 25-kW, 230-V shunt motor has an armature resistance of 0.064 Ω and a field-circuit...
3. A 25-kW, 230-V shunt motor has an armature resistance of 0.064 Ω and a field-circuit resistance of 95 Ω. The motor delivers rated output power at rated voltage when its armature current is 122 A. When the motor is operating at rated voltage, the speed is observed to be 1150 r/min when the machine is loaded such that the armature current is 69.5 A a. Calculate the rated-load speed of this motor In order to protect both the motor...
1. A 300 V compound motor has armature resistance 0.18 Ω, series field resistance 0.3 Ω...
1. A 300 V compound motor has armature resistance 0.18 Ω, series field resistance 0.3 Ω and shunt field resistance 100 Ω. The rotational losses are 200 W. On full load the line current is 25 A and the motor runs at 1800 rpm. Determine: (i) the developed mechanical power (ii) the output power (iii) the output torque (iv) the efficiency at full load 2. A 120 V series motor has 0.2 Ω field resistance. On full load, the line...
A d.c shunt motor has armature and field resistance of 0.2 Ω and 110 Ω respectively....
A d.c shunt motor has armature and field resistance of 0.2 Ω and 110 Ω respectively. The motor is running at 1200 rpm and drawing 15 A from 110 V supply. If the field resistance is decreased by 10%, calculate the new steady state armature current and speed of the motor. Assume the load torque to be constant
A d.c shunt motor has armature and field resistance of 0.2 Ω and 110 Ω respectively....
A d.c shunt motor has armature and field resistance of 0.2 Ω and 110 Ω respectively. The motor is running at 1200 rpm and drawing 15 A from 110 V supply. If the field resistance is decreased by 10%, calculate the new steady state armature current and speed of the motor. Assume the load torque to be constant.
A 208 V shunt motor is rated at 5 HP and 1000 rpm. At rated output...
A 208 V shunt motor is rated at 5 HP and 1000 rpm. At rated output it draws 28 A of line current. The total armature circuit resistance is 0.5 12. The field resistance is 102 12. Find the armature current.
A 220 V DC shunt motor has an armature resistance, Re-0.1 S2, a field resistance, Ry=100...
A 220 V DC shunt motor has an armature resistance, Re-0.1 S2, a field resistance, Ry=100 12, and negligible rotational losses. Under certain load conditions, the shunt motor runs at 1600 rpm while drawing a total current, I = 100 A. Determine: a. the output power of the motor; b. the output torque in N-m; and, c. the efficiency Without making any changes to the applied voltage or the field, the motor operates with a new M mechanical load that...
A 230 V, 1000 rpm, 30 A separately excited motor has armature resistance and inductance of...
A 230 V, 1000 rpm, 30 A separately excited motor has armature resistance and inductance of 0.7 Ω and 50 mH respectively. Motor is controlled in regenerative braking by a chopper operating at 800 Hz from a dc source of 230 V. Assuming continuous conduction a) Calculate duty ratio of chopper for rated torque and the speed of 800 rpm. b) What will be the motor speed for duty ratio of 0.6 and rated motor torque? c) What will be...
P4-17) A 240 V separately exited dc motor has an armature resistance of Ra = 006...
P4-17) A 240 V separately exited dc motor has an armature resistance of Ra = 006 Ω, when it is connected to a 240 V supply, it draws 90 A from the supply and rotates at 1200 rpm. Find the torque developed by the motor at this operating condition. If the torque developed is 280 Nm for the same excitation and same supply voltage, then find the speed and armature current. a) b)
Problem 3: DC machine A shunt DC motor rated at V,'. 300 V, with field resistance...
Problem 3: DC machine A shunt DC motor rated at V,'. 300 V, with field resistance of Rf 600 0, armature 0.2 , resistance of R, 30.5 A (total current) when rated-load at n, consumes 916.8 rpm. Armature rotational loss (consisting of fan, friction and core loss (consisting of field resistance, armature a) Find Prot (rotational load), Pshaft and efficiency at rated load. - Assume that the rotational loss is constant and P,aft is now 50% in the case of...
A 8250 w shunt DC motor has a terminal voltage of 300 V. A field resistance...
A 8250 w shunt DC motor has a terminal voltage of 300 V. A field resistance Rf of 40 Ω, and an armature resistance Ra of 250 mm2. The field winding has 1500 turns. An adjustable resistance Rad is connected in series to the field winding. Rad is set at 20 Ω, but it can vary from 0 to 80 Ω. The magnetization curve is shown in Figure.1 and it is taken at a speed of 1200 rpm. (Armature reaction...
3. A 25-kW, 230-V shunt motor has an armature resistance of 0.064 Ω and a field-circuit resistance of 95 Ω. The motor delivers rated output power at rated voltage when its armature current is 122 A. When the motor is operating at rated voltage, the speed is observed to be 1150 r/min when the machine is loaded such that the armature current is 69.5 A a. Calculate the rated-load speed of this motor In order to protect both the motor...
A 208 V shunt motor is rated at 5 HP and 1000 rpm. At rated output it draws 28 A of line current. The total armature circuit resistance is 0.5 12. The field resistance is 102 12. Find the armature current.
A 220 V DC shunt motor has an armature resistance, Re-0.1 S2, a field resistance, Ry=100 12, and negligible rotational losses. Under certain load conditions, the shunt motor runs at 1600 rpm while drawing a total current, I = 100 A. Determine: a. the output power of the motor; b. the output torque in N-m; and, c. the efficiency Without making any changes to the applied voltage or the field, the motor operates with a new M mechanical load that...
P4-17) A 240 V separately exited dc motor has an armature resistance of Ra = 006 Ω, when it is connected to a 240 V supply, it draws 90 A from the supply and rotates at 1200 rpm. Find the torque developed by the motor at this operating condition. If the torque developed is 280 Nm for the same excitation and same supply voltage, then find the speed and armature current. a) b)
Problem 3: DC machine A shunt DC motor rated at V,'. 300 V, with field resistance of Rf 600 0, armature 0.2 , resistance of R, 30.5 A (total current) when rated-load at n, consumes 916.8 rpm. Armature rotational loss (consisting of fan, friction and core loss (consisting of field resistance, armature a) Find Prot (rotational load), Pshaft and efficiency at rated load. - Assume that the rotational loss is constant and P,aft is now 50% in the case of...
A 8250 w shunt DC motor has a terminal voltage of 300 V. A field resistance Rf of 40 Ω, and an armature resistance Ra of 250 mm2. The field winding has 1500 turns. An adjustable resistance Rad is connected in series to the field winding. Rad is set at 20 Ω, but it can vary from 0 to 80 Ω. The magnetization curve is shown in Figure.1 and it is taken at a speed of 1200 rpm. (Armature reaction...
Most questions answered within 3 hours.
-
Explain Mertons concept of anomie is and what the
modes of adaptation to it are?
asked 25 minutes ago -
Jamie is doing a survey at her school about whether the students
feel the cafeteria food...
asked 1 hour ago -
How many liters of 0.669 M KOH will be needed to raise the pH of
0.339...
asked 4 hours ago -
A liquid of density 1270 kg/m 3 flows steadily through a pipe of
varying diameter and...
asked 4 hours ago -
Questions: What should the American executive do?
'A visiting American executive finds that a foreign subsidiary...
asked 4 hours ago -
Activity based costing was introduced as an alternative to
absorption costing.
1. Discuss using illustration the...
asked 4 hours ago -
1. You own shares of Crane DVD Company and are interested in
selling them. With so...
asked 4 hours ago -
How many grams of He are necessary to fill a balloon having a
volume of 4.5E3...
asked 4 hours ago -
The 2 patients, still in the hospital, were interviewed by a
MoH epidemiologist. The interviews revealed...
asked 4 hours ago -
An uncharged capacitor and a resistor are connected in series to
a source of emf. If...
asked 4 hours ago -
If assets are $540,000 and liabilities are $236,000 what is the
amount of owner’s equity?
asked 4 hours ago -
MATH 3421 Maple Assignment 1 Due February 13, 2019 Maple is a
Computer Algebra System that...
asked 4 hours ago