4) A brass bushing with an inner diameter of 40mm and an outer diameter of 60mm is press fit into a steel tube of outer diameter 100mm. Determine the maximum stress in both materials. Assume the f...
2 A hollow steel shaft ACB of outer diameter 60mm and inner diameter 40mm is under a torgue generated by two opposite forces of magnitude P a) Express the reaction torques at A and B in terms of P. (pretend that you know p) b) The allowaible shear stress in the shaft is 60MPa. Determine the allowable P 200 mm 200 mm 600 mm 400 mm
A press fit is used with an inner aluminum solid disc of radius 1.25" and an outer steel hollow annulus of inner radius 1.25" and outer radius 2". If the steel has a yield stress in tension of 36 ksi and the aluminum is 18 ksi, determine the maximum radial interference before yielding will occur. Assume plane stress conditions. Use the MSS theory. A press fit is used with an inner aluminum solid disc of radius 1.25" and an outer...
of a brass core (diameter d, -8 mm) surrounded by a steel shell (inner diameter d2 8.75 mm, outer diameter d -10 mm), topped by a rigid cap. A load P compresses the core and shell, which have length L 120 mm. The moduli of elasticity of the brass and steel are Eb- 101 GPa and E 200 GPa, respectively. a) What load P will compress the assembly by 0.104 mm? b) If the compressive yield stress of the brass...
Mechanics and Materials Help Question 1. (a) A steel tube having inner and outer dimeters of 1.5 in. and 2 in., respectively, is tuming at 45 rev/min. If the allowable shear stress (Tallow) of the tube material is 10 ksi, determine the horse power (hp) transmitted by the tube. (20 points) (b) The A-36 solid steel shaft is 3.5 m long and has a diameter of 60 mm. The shaft is used to transmit a torque of T = 524...
Both parts please Question 1. (a) A steel tube having inner and outer dimeters of 1.5 in and 2 in., respectively, is turning at 45 rev/min. If the allowable shear stress (Tallow) of the tube material is 10 ksi, determine the horse power (hp) transmitted by the tube. (20 points) (b) The A-36 solid steel shaft is 3.5 m long and has a diameter of 60 mm. The shaft is used to transmit a torque of T-524 N-m from the...