A galvanometer has a coil with a resistance of 24.0 ?, and a current of 180 ?A causes it to deflect full scale. If this...
A galvanometer with a coil resistance of 16.3 is used with a shunt resistor to make a nondigital ammeter that has an equivalent resistance of 0.817 . The current in the shunt resistor is 3.97 mA when the galvanometer reads full scale. Find the full-scale current of the galvanometer.
A galvanometer of resistance 100 Ω gives full-scale deflection when its current is 1.0 mA. It is used to construct an ammeter whose full-scale reading is 100 A. If the shunt resistor consists of a piece of 10-gauge copper wire (diameter 2.59 mm), what should its length be
Y ou have available a galvanometer that gives a full-scale deflection for a 333-μA current and has a coil resistance of 33 Ω. (a) What shunt resistance is needed to convert this galvanometer to a 5.0-A ammeter? (b) What series resistance is needed to convert this galvanometer to a 5.0-V voltmeter?
A galvanometer has a coil resistance of Rgalv = 13.9 ?. It is to be made into a voltmeter with a full-scale voltage equal to V = 325.0 V. If the galvanometer deflects full scale for a current of Igalv = 245.5 mA, what size additional resistor should be used?
A galvanometer has a coil resistance of ?galv=27.4 Ω . It is to be made into a voltmeter with a full‑scale voltage equal to ?=225.0 V. If the galvanometer deflects full scale for a current of ?galv=255.5 mA, what size additional resistor should be used? additional resistor size: ople Window Help Jump to... ersity-PHYS 1010/1133-Winter19-MACKAY> Activities and Due Dates> D Assignment Score: s00/1700 Resources Hint Check Answer Question 14 of 17> eter has a coil resistance of R.-274 Ω. It...
2) For a galvonometer, the value of the current that gives a full scale deflection is 3 mA and the internal resistance of the coil in the galvanometer is 90 2. a) Find the shunt resistance Rs which allows this galvonometer to be used as a 5 A ammeter. b) Draw the circuit of the constructed 5 A ammeter and show the corresponding currents and resistance values in the circuit. c) When the scale shows 0.75 mA, what will be...
The coil of wire in a galvanometer has a resistance of RC = 75.0 Ω. The galvanometer exhibits a full-scale deflection when the current through it is 0.200 mA. A resistor is connected in series with this combination so as to produce a voltmeter. The voltmeter is to have a full-scale deflection when it measures a potential difference of 14.0 V. What is the resistance of this resistor?
Given that a certain galvanometer has an internal resistance of 254 Ω and can handle a maximum current of 250 μA, design an ammeter capable of reading at full-scale deflection (the maximum current without burning up the meter) 10 A and a voltmeter capable of reading at full-scale deflection 10 V. Assume that the space available in the meter for the shunt (for the ammeter) or limiting (for the voltmeter) resistor is no more than 5 mm in length and...
1. Given that a certain galvanometer has an internal resistance of 254 N and can handle a maximum current of 250 A, design an ammeter capable of reading at full- scale deflection (the maximum current without burning up the meter) 10 A and a voltmeter capable of reading at full-scale deflection 10 V. Assume that the space available in the meter for the shunt (for the ammeter) or limiting (for the voltmeter) resistor is no more than 5 mm in...
1. Given that a certain galvanometer has an internal resistance of 254 1 and can handle a maximum current of 250 HA, design an ammeter capable of reading at full- scale deflection (the maximum current without burning up the meter) 10 A and a voltmeter capable of reading at full-scale deflection 10 V. Assume that the space available in the meter for the shunt (for the ammeter) or limiting (for the voltmeter) resistor is no more than 5 mm in...