Homework Answers
Add Answer to:
NEC2103-Engineering Materials and Construction Example Mix Design Problems Question 2. Design a concrete mix using...
Design a concrete mix in accordance with the B.R.E. method and calculate the quantity of each...
Design a concrete mix in accordance with the B.R.E. method and
calculate the quantity of each constituent material for trial mix.
The specification of the concrete mix is:
1. Design a concrete mix in accordance with the B.R.E. method and calculate the quantity of each constituent material for trial mix. The specification of the concrete mix is: • Characteristic strength at 28 days: 40 N/mm² • Standard deviation : 8 N/mm • Proportion defective : 5% • Cement type :...
3. Design a concrete mix using BS 8328 for the following information: a. QC = Good...
3. Design a concrete mix using BS 8328 for the following information: a. QC = Good b. % defects = 5% c. Cement type = SRPC d. 28 days Fc = 33 MPa e. Slump = 75 mm f. Coarse aggregate = natural gravel g. NMS = 40 mm h. FM of sand = 2.5 i. Exposure condition = moderate j. Concrete cover = 35 mm k. Specific gravity of sand and gravel = 2.7
Question 1. A concrete mix is to be designed for use in a 250 mm thick road pavement. The desired properties are pr...
Question 1. A concrete mix is to be designed for use in a 250 mm thick road pavement. The desired properties are provided below. Use the ACI method to calculate the required amounts per unit volume (/1m) of water, cement, course aggregate and fine aggregate. Slump 25 mm Average 28-day flexural strength of at least 4.5 MPa Coarse aggregate: nominal maximum size = 37.5 mm, dry-rodded weight 1600 kg/m3, specific gravity 2.68, moisture content 1.0 percent, absorption 0.5 percent Fine...
The following requirements are specified for concrete construction of a reinforced concrete jetty exposed to sea...
The following requirements are specified for concrete construction of a reinforced concrete jetty exposed to sea water and moderate freeze and thaw environment Required Design Strength, fc Slump required Standard deviation Cement 35 MPa 25-75 mnm 4.8 MPa Ordinary portland cement with relative density 3.15 Fine Aggregate (Natural Sand) Oven-dry relative densitv SSD moisture content Moisture content of sample Fineness Modulus 2.3 0.2 % 4.3 % 2.63 Coarse aggregate (crushed stone) Nominal maximum aggregate size Oven-dry relative density SSD moisture...
please help with this concrete design mix problem (40 points) Design the concrete mix according to...
please help with this concrete design mix problem
(40 points) Design the concrete mix according to the following conditions. Perform the necessary computations to determine all ingredients in (kg) per unit volume of mix, and state resources and cite references used for each step. Summarize your design in the table at the bottom, and answer the questions beneath the table. Application Environment Area 52, airport location Idaho, (150m x 50m) runway test section Exposures: freeze-thaw, deicers Design Environment Concrete Requirements:...
Problem with different moisture conditions: 5. Calculate the quantities of cement, water, fine ag...
Problem with different moisture conditions: 5. Calculate the quantities of cement, water, fine aggregate, and coarse aggregate per trial mix of 1 m3 for the following specifications. Target mean compressive strength-30 MPa at 7 days; Cement strength class 42.5; Slump required 100 mm; Max. Aggregate size 20 mm; specific gravity of aggregates 2.65% Coarse aggregate UNCRUSHED (10, 20mm), fine aggregate CRUSHED (50% pass 600 micros); Maximum allowable free- water/cement ratio 0.40; Minimum allowable cement content 275 kg/m3; Absorption of fine...
Q1// Use the ACI method to design a concrete mix which is required to obtain f'c28=...
Q1// Use the ACI method to design a concrete mix which is required to obtain f'c28= 34.5MPa and a slump of 75mm. the fineness modulus of the aggregate is 3.0, the bulk density of coarse aggregate is 1600 kg/m' and the maximum size is 25. Both the specific gravity of fine and coarse aggregate are 2.68. neglect the absorption and total moisture content.
Compute the SSD mix proportions for the following mix design using the ACI method: Compressive Strength:...
Compute the SSD mix proportions for the following mix design using the ACI method: Compressive Strength: 3,000 psi Slump: 4 inches Non-Air Entrained Concrete The materials have the following properties: | Cement: Type I, specific gravity = 3.15 | Fine Aggregate: Bulk specific gravity = 2.68; fineness modulus = 2.40 Coarse Aggregate: Maximum size aggregate = 1 inch; bulk specific gravity = 2.68; Dry-rodded unit weight = 100 lbs/ft3
The question is as follows:- Q) Design the concrete mixture for the slab
The question is as follows:-
Q) Design the concrete mixture for the slab
2. A reinforced slab concrete foundation is to be poured for a building. The building is to be constructed near Edmonton. The slab will be in direct contact with the soil, and the soil typically has a sulphate content of 0.3 percent by mass. The minimum rebar spacing in the slab is 100 mm. The contractor is certain that his workers can place a concrete with a...
Admixture for Concrete
Please carry out a concrete mix design for an air-entrained concrete production based on the following data below;Characteristic strength: 69 N/mm2 28-day design strength concreteDefective rate (k): 5%PC strength class: 42,5Aggregate type: Coarse: CrushedFine : UncrushedSlump : S3 workability class under EN 206 (find out the range)Maximum aggregate size : 28 mm (2-digit)Maximum free w/c ratio: 0.48Minimum cement content: 385 kg/m3Relative density of aggregate : 2.69 (2 decimal places)Grading of fine aggregate passing 600 µm : 70%Standard deviation: 4 N/mm2Air content: 4%
Design a concrete mix in accordance with the B.R.E. method and
calculate the quantity of each constituent material for trial mix.
The specification of the concrete mix is:
1. Design a concrete mix in accordance with the B.R.E. method and calculate the quantity of each constituent material for trial mix. The specification of the concrete mix is: • Characteristic strength at 28 days: 40 N/mm² • Standard deviation : 8 N/mm • Proportion defective : 5% • Cement type :...
3. Design a concrete mix using BS 8328 for the following information: a. QC = Good b. % defects = 5% c. Cement type = SRPC d. 28 days Fc = 33 MPa e. Slump = 75 mm f. Coarse aggregate = natural gravel g. NMS = 40 mm h. FM of sand = 2.5 i. Exposure condition = moderate j. Concrete cover = 35 mm k. Specific gravity of sand and gravel = 2.7
Question 1. A concrete mix is to be designed for use in a 250 mm thick road pavement. The desired properties are provided below. Use the ACI method to calculate the required amounts per unit volume (/1m) of water, cement, course aggregate and fine aggregate. Slump 25 mm Average 28-day flexural strength of at least 4.5 MPa Coarse aggregate: nominal maximum size = 37.5 mm, dry-rodded weight 1600 kg/m3, specific gravity 2.68, moisture content 1.0 percent, absorption 0.5 percent Fine...
The following requirements are specified for concrete construction of a reinforced concrete jetty exposed to sea water and moderate freeze and thaw environment Required Design Strength, fc Slump required Standard deviation Cement 35 MPa 25-75 mnm 4.8 MPa Ordinary portland cement with relative density 3.15 Fine Aggregate (Natural Sand) Oven-dry relative densitv SSD moisture content Moisture content of sample Fineness Modulus 2.3 0.2 % 4.3 % 2.63 Coarse aggregate (crushed stone) Nominal maximum aggregate size Oven-dry relative density SSD moisture...
please help with this concrete design mix problem
(40 points) Design the concrete mix according to the following conditions. Perform the necessary computations to determine all ingredients in (kg) per unit volume of mix, and state resources and cite references used for each step. Summarize your design in the table at the bottom, and answer the questions beneath the table. Application Environment Area 52, airport location Idaho, (150m x 50m) runway test section Exposures: freeze-thaw, deicers Design Environment Concrete Requirements:...
Problem with different moisture conditions: 5. Calculate the quantities of cement, water, fine aggregate, and coarse aggregate per trial mix of 1 m3 for the following specifications. Target mean compressive strength-30 MPa at 7 days; Cement strength class 42.5; Slump required 100 mm; Max. Aggregate size 20 mm; specific gravity of aggregates 2.65% Coarse aggregate UNCRUSHED (10, 20mm), fine aggregate CRUSHED (50% pass 600 micros); Maximum allowable free- water/cement ratio 0.40; Minimum allowable cement content 275 kg/m3; Absorption of fine...
Q1// Use the ACI method to design a concrete mix which is required to obtain f'c28= 34.5MPa and a slump of 75mm. the fineness modulus of the aggregate is 3.0, the bulk density of coarse aggregate is 1600 kg/m' and the maximum size is 25. Both the specific gravity of fine and coarse aggregate are 2.68. neglect the absorption and total moisture content.
Compute the SSD mix proportions for the following mix design using the ACI method: Compressive Strength: 3,000 psi Slump: 4 inches Non-Air Entrained Concrete The materials have the following properties: | Cement: Type I, specific gravity = 3.15 | Fine Aggregate: Bulk specific gravity = 2.68; fineness modulus = 2.40 Coarse Aggregate: Maximum size aggregate = 1 inch; bulk specific gravity = 2.68; Dry-rodded unit weight = 100 lbs/ft3
The question is as follows:-
Q) Design the concrete mixture for the slab
2. A reinforced slab concrete foundation is to be poured for a building. The building is to be constructed near Edmonton. The slab will be in direct contact with the soil, and the soil typically has a sulphate content of 0.3 percent by mass. The minimum rebar spacing in the slab is 100 mm. The contractor is certain that his workers can place a concrete with a...
Most questions answered within 3 hours.
-
4. Without doing any calculations, predict whether the observed
∆T would increase, decrease or remain the...
asked 48 minutes ago -
Based on the range, which of the following sets of scores has
the greatest variability? 3,...
asked 1 hour ago -
Ripples in a pond travel at a velocity of 3 m/s with one peak
passing a...
asked 1 hour ago -
A man stands on the roof of a building of height 13.0 mm and
throws a...
asked 1 hour ago -
The extent to which assets are financed by borrowed funds and
other liabilities is indicated by:...
asked 2 hours ago -
Explain in detail
Germany is the fifth largest economy
explain what goods and services Germany specializes...
asked 3 hours ago -
The density of platinum is 21.45 g/mL. If a cube of platinum
with a mass of...
asked 3 hours ago -
Accounts Receivable
Sales
A/R Posting
Extended Sales Invoice
Packing Slip
Compare invoice to packing slip 2...
asked 3 hours ago -
Michaella, age 23, is a full-time law student and is claimed by
her parents as a...
asked 3 hours ago -
Why are polymers not typically casted into products?
asked 3 hours ago -
When rolling a die 129 times, what is the probability of rolling
a 6 no more...
asked 3 hours ago -
4. A call option currently sells for $7.75. It has a strike
price of $85 and...
asked 3 hours ago