Thornhill-Craver Equation The modified Thornhill-Craver Equation is used to calculate the gas flow rate through gas...
Consider the flow through a rocket engine nozzle. In the combustion chamber, the gas which results from the combustion of the rocket fuel and oxidizer is at a pressure and temperature of 15 atm and 2500K, respectively; the molecular weight and specific heat at constant pressure of the combustion gas are 12 kg/kmol and 4157 J/kg · K, respectively. Assume that the gas flow through the nozzle is an isentropic expansion of calorically perfect gas, with a temperature of 1350K...
Air flows through a converging-diverging nozzle/diffuser. Assuming isentropic flow, air as an ideal gas, and constant specific heats determine the state at several locations in the system. Solve using equations rather than with the tables. Note: The specific heat ratio and gas constant for air are given as k=1.4 and R-0287 kJ/kg-K respectively --Given Values-- Inlet Temperature: TI (K) 349 Inlet pressure: Pl (kPa) 460 Inlet Velocity: V1 (m/s) 73 Area at nozzle inlet: Al (cmA2) 8.19 Throat area: A...
How does combustion tenper e te extent ol Teattiny Problem #2 A 4.0 Liter six-cylinder four-stroke SI square engine (bore and stroke 9.47 cm) with a direct injection system with one injector per cylinder is designed to have a maximum speed of 7000 RPM at wide open throttle with a stoichiometric air-fuel ratio of 14.6. The injector nozzle diameter is 0.2 mm. There is one intake valve per cylinder and the valve lift equals one fourth the valve diameter. The...
Air flows through a converging-diverging nozzle/diffuser. Assuming isentropic flow, air as an ideal gas, and constant specific heats determine the state at several locations in the system. Note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg-K respectively. --Given Values-- Inlet Temperature: T1 (K) = 360 Inlet pressure: P1 (kPa) = 583 Inlet Velocity: V1 (m/s) = 105 Area at inlet (cm^2) = 8.2 Mach number at the exit = 1.86 a) Determine...
Air flows through a converging-diverging nozzle/diffuser. Assuming isentropic flow, air as an ideal gas, and constant specific heats determine the state at several locations the system. Solve using equations rather than with the tables. Note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg-K respectively. --Given Values-- Inlet Temperature: T1 (K) = 353 Inlet pressure: Pl (kPa) = 546 Inlet Velocity: V1 (m/s) = 61 Area at nozzle inlet: A1 (cm^2) = 7.24...
a) Check the correctness of the following equation using the principle of dimensional homogeneity. (2 Marks) I=c(Vv/t) - dva + a3 (I=Impulse, t= time, v=velocity, a=acceleration, c=dimensionless constant, d=distance) b) Find the Dimensional Formula of n in the following equation. (2 Marks) V=2Van + atr3 (V= Volume, t= time, r=radius, a=area) c) Pressure of a specific gas in a container is directly proportaional to square of its Volume. Find the Dimensional Formula of the proportionality constant. (3 Marks)
Air flows through a converging-diverging nozzle/diffuser. Assuming isentropic flow, air as an ideal gas, and constant specific heats determine the state at several locations in the system. Solve using equations rather than with the tables. Note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg-K respectively. --Given Values-- Inlet Temperature: T1 (K) = 321 Inlet pressure: P1 (kPa) = 588 Inlet Velocity: V1 (m/s) = 97 Area at nozzle inlet: A1 (cm^2) =...
Air flows through a converging-diverging nozzle/diffuser. Assuming isentropic flow, air as an ideal gas, and constant specific heats determine the state at several locations in the system. Solve using equations rather than with the tables. Note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg-K respectively. --Given Values-- Inlet Temperature: T1 (K) 370 Inlet pressure: P1 (kPa) = 576 Inlet Velocity: V1 (m/s) - 106 Area at nozzle inlet: A1 (cm^2) = 8.32...
Air flows through a converging-diverging nozzle/diffuser. Assuming isentropic flow, air as an ideal gas, and constant specific heats determine the state at several locations in the system. Solve using equations rather than with the tables. Note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg-K respectively. --Given Values-- Inlet Temperature: T1 (K) = 348 Inlet pressure: P1 (kPa) = 544 Inlet Velocity: V1 (m/s) = 122 Area at nozzle inlet: A1 (cm^2) =...
Air flows through a converging-diverging nozzle/diffuser. Assuming isentropic flow, air as an ideal gas, and constant specific heats determine the state at several locations in the system. Note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg-K respectively. --Given Values-- Inlet Temperature: T1 (K) = 338 Inlet pressure: P1 (kPa) = 555 Inlet Velocity: V1 (m/s) = 121 Area at inlet (cm^2) = 9 Mach number at the exit = 1.56 a) Determine...