Given:
Pi = 130 kPa
Ti = 25.0 oC
= (25.0+273) K
= 298 K
Tf = -183.0 oC
= (-183.0+273) K
= 90 K
use:
Pi/Ti = Pf/Tf
130 kPa / 298.0 K = Pf / 90.0 K
Pf = 39.2617 kPa
Answer: 39.3 kPa
7. An oxygen tank reads 130 kPa with a temperature of 25 °C. What will the...
14. An automobile tire is inflated to a gauge pressure of 207 kPa (30 lb/in.2) at a time when the surrounding pressure is 1 atm (101.3 kPa) and the temperature is 25°C After the car is driven, the temperature of the air in the tire increases to 40°C. Assuming the volume changes only slightly, what will be the new gauge pressure in the tire? d) An oxygen tank with an internal volume of 20 liters is filled with oxygen under...
A nurse that is preparing oxygen therapy for a patient reads the pressure on the tank as 2.00atm. The chart for calculating the time of the treatment requires oxygen pressure to be reported in kPa. What value would the nurse use for the chart?
2b) (10 points) If the pressure gauge at the bottom of the tank reads 100 kPa, what is the pressure in the Air at the top of the tank if the liquid temperature is 35°C? Give answer in psi and KPa. You must show your work to get full credit. ir 3 m 2m Oil (S 0.8) 3 m Water kPa
A rigid tank that contains 2.4 kg of N2 at 25°C and 550 kPa is connected to another rigid tank that contains 4.4 kg of O2 at 25°C and 150 kPa. The valve connecting the two tanks is opened, and the two gases are allowed to mix. If the final mixture temperature is 25°C, determine the volume of each tank and the final mixture pressure. The gas constants of N2 and O2 are 0.2968 and 0.2598 kPa.m3/kg.K, respectively. The universal...
12) A scuba tank contains an air at 300 kPa and 600 K. Half of the air is withdrawn from the tank leaving the tank at a pressure of 100 kPa. Assuming no heat transfer, what is the temperature of the gas when the process is complete? (a) 100 K (b) 200 K (c) 300 K (d) 400 K (e) 500 K 13) A 0.6875 cubic meter rigid tank contains 0.5 kg of steam at 0.4 Mpa. The steam is...
12) A scuba tank contains an air at 300 kPa and 600 K. Half of the air is withdrawn from the tank leaving the tank at a pressure of 100 kPa. Assuming no heat transfer, what is the temperature of the gas when the process is complete? (a) 100 K (b) 200 K (c) 300 K (d) 400 K (e) 500 K 13) A 0.6875 cubic meter rigid tank contains 0.5 kg of steam at 0.4 Mpa. The steam is...
4) Volume 2.5 m^3 air in a rigid tank with initial pressure 100 kPa and temperature 25°C There. It is applied to the tank feed line by a valve. Pressure of air flowing through the supply line 600 kPa and temperature is 25°C. By opening the valve, the pressure of the air in the tank is air entering the tank until it is equal to the pressure of the air It is closed. A thermometer placed in the tank lasts...
1. (10 pts) A 10 m® rigid storage tank contains oxygen gas (R = 0.2598 kJ/kg.K, Cp = 0.918 kJ/kg.K, cv = 0.658 kJ/kg.K). The tank is initially 200 kPa and 600° It is cooled to 25°C in 35 minutes. Determine: 1. (3 pts) The mass of oxygen in the tank, in kg. 2. (3 pts) The final pressure in the tank, in kPa. 3. (4 pts) The rate of heat transfer from the oxygen, in kW.
A 25-L tank contains 64 gm of oxygen at 27°C. What is the number of moles of oxygen and what is the pressure in the tank?
16.3 L N2 at 25 °C and 125 kPa and 35.9 L O2 at 25 °C and 125 kPa were transferred to a tank with a volume of 6.50 L. What is the total pressure at 53 °C