Design a pair of straight gears, specifying the module the number
of teeth, the pitch diameters, the distance between centers, the
face width and the material with which the gears should be
manufactured, if they will be used as part of a transmission to
move A mobile sand sieve. The wheel should rotate at 450 rpm +/-
5%, having as an energy source an internal combustion engine that
rotates at 2500 rpm with 80 H.P. The distance between centers
should not be more than 200 mm. The transmission is expected to
work for 5 continuous years without maintenance stops, in 10 hours
/ day, with 99.9% reliability. Evaluate your design with the
criteria of resistance to bending and stinging. Specify sprocket
and wheel construction materials. JUSTIFY ALL DESIGN DECISIONS.
THIS ANSWER IS TO EVALUATE THE DESIGN WITH THE CRITERIA OF
RESISTANCE TO BENDING AND STINGING.
Design a pair of straight gears, specifying the module the number of teeth, the pitch diameters,...
mechanical engineering design
Problem #2: A pair of helical gears have a module in the normal plane of 5 mm, a normal pressure angle of 20, and a helix angle of 35. The gears mesh with parallel shafts and have 32 and 52 teeth. Determine the transverse module, the pitch diameters, the center distance, and the minimum face width.
a pair of involute tooth gears of 20 ° to full depth transmit 18kw, from a turning pinion to 1200 r.p.m. even an output shaft that must rotate at 320 r.p.m + \ - 5%. These elements are part of the transmission of a milling machine. Design the gear and the wheel having as design criteria the effort to flex and bite, if you must guarantee the operation during 5 years of continuous work. The design must have a reliability...
The accessory drive unit of a large aircraft engine involves an identical pair of 200 full-depth spur gears. The gears have 70 teeth and rotate together at 8000 rpm. The diametral pitch is 12 and the face width 1.0 in. The gears are made of alloy steel, case-hardened to 62RC (680 Bhn). Although the case extends throughout the fillet, it is conservatively decided to use the core hardness of 500 Bhn for calculating fatigue strengths. The tooth profiles are finished...
power = 3 kW
if need any more information please ask !!!
You are the designer and you have been asked to design a speed reducer (gearbox) that will take power from the shaft of an electric motor rotating at 1500 rpm and deliver it to a machine that is to operate at approximately at 200 rpm Assume that you have decided to use spur gears to transmit the power [A power equal to the last one digits of your...