Homework Answers
Add Answer to:
ans
02. A cylinder 80 mm diameter and 200mm roof is placed in a stream of...
A very long cylinder (diameter 1 mm) is placed perpendicular to a steady air stream whose velocit...
A very long cylinder (diameter 1 mm) is placed perpendicular to a steady air stream whose velocity is 10 m/sec. The cylinder is heated electrically; the power input is 100 watts per meter span. At what distance downstream is the rms temperature fluctuation in the wake of the cylinder reduced to 1 0C? Assume that the distribution of the mean temperature difference in the wake is similar to the distribution of the mean velocity defect. What is the mean temperature...
Member (1) is a solid 50 mm diameter cylinder made from magnesium. The modulus of elasticity...
Member (1) is a solid 50 mm diameter cylinder made from magnesium. The modulus of elasticity is 44.7 GPa and the thermal coefficient of expansion is 26 x 106/°C. The cylinder is placed in a clamp when the temperature is 20℃ Two stainless steel carriage bolts (2) hold the cylinder snug with negligible force against the rigid jaws of the clamp. Each bolt has a diameter of 10 mm, modulus of elasticity of 193 GPa, and a coefficient of thermal...
A circular pipe, with an outside diameter of 30 mm and a wall thickness of 4 mm, is held stationary in a stream of air...
A circular pipe, with an outside diameter of 30 mm and a wall thickness of 4 mm, is held stationary in a stream of air for which T-30°C, F-1 atm , and V-25 m/s . The pipe, which is made of PVC, experiences cross-flow conditions in the moving air 1) The temperature at the inner surface of the pipe is maintained at 90°C. The outer surface of the pipe is smooth. Also, assume that steady-state conditions exist. Since the outer...
A long horizontal cylinder with diameter of d-60 mm and length of L-1 m is at 27°C and is placed ...
A long horizontal cylinder with diameter of d-60 mm and length of L-1 m is at 27°C and is placed in a quiescent environment at 4°C. Find the cooling rate (q). End effects (heat transfer from the two ends of the cylinder) are negligible. The following relation (Churchill and Chu) for Nusselt number can be used. Air (T-288.5K): v=14.87x10° m2/s, k=0.0254 w/m-K, α=21.0x10-6 m2/s, Pr-0.71, B-3.47x1031/K. 1. Quiescent air 7,-4°C 0.06 m diameter T 27 C L=1m MUD 10.60 +...
Q3. A very long horizontal cylinder of Unobtainium, of diameter 100 mm, is initially at a...
Q3. A very long horizontal cylinder of Unobtainium, of diameter 100 mm, is initially at a uniform temperature of 500 K. The cylinder is cooled by a fan. The fan blow airs, with a temperature of 300 K, over the cylinder at a velocity of 6 m/s in a direction perpendicular to the axis of the cylinder. Calculate a) the average convective heat transfer coefficient at the beginning of the cooling process when the initial temperature of the cylinder is...
Experiment (7) Drag Force TASK DETAILS Students must use the following equation in order to calculate...
Experiment (7) Drag Force TASK DETAILS Students must use the following equation in order to calculate the drag force on a cylindrical sample placed inside a wind tunnel at varying velocities 1 For CopAV Where: Cp is the drag coefficient p is the density of the fluid through which the body is moving (Pair = 1.225 kg/m?) v is the velocity of the body relative to the fluid A is the projected cross-sectional area of the body perpendicular to the...
02: A bar of 60 mm diameter and length of 3 meter is used to produce 500 pieces on a center lathe having the follow...
02: A bar of 60 mm diameter and length of 3 meter is used to produce 500 pieces on a center lathe having the following characteristics: . Maximum rotational speed .Minimum rotational speed .Number of speeds Lathe overall efficiency The turning process is performed at 40 m/min cutting velocity. 0.5 mm/rev longitudinal feed, 0.25 mm/rev transverse feed and 2 mm depth of cut REQUIRED 1. Calculate the TWELVE rotational speeds in rpm. 2. What rotational speed would you choose? 3....
Qi. A flat plate of width 1 m and length 0.2m is maintained at a temperature of 32°C. Ambient fluid at 22"C fBlows across the top of the plate in parallel flow. Determine the average heat tr...
Qi. A flat plate of width 1 m and length 0.2m is maintained at a temperature of 32°C. Ambient fluid at 22"C fBlows across the top of the plate in parallel flow. Determine the average heat transfer coefficient, the convection heat transfer rate from the top of the plate, and the drag force on the plate for the following: (a) The Buid is water flowing at a velocity of 0.5 m/s. o) Water is flowing at a velocity of 2.5...
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C...
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C and leaves the tubes at 6 MPa and 450°C with a velocity of 80 m/s. Calculate the velocity of the water at the tube inlet and the inlet volume flow rate. [5-14] 2. Air enters a nozzle steadily at 50 psia, 140°F, and 150 ft/s and leaves at 14.7 psia and 900 ft/s. The heat loss from the nozzle is estimated to be 6.5...
Objective To determine the force generated by a jet of water striking on a surface Description...
Objective To determine the force generated by a jet of water striking on a surface Description of apparatus The supply is led to a vertical pipe terminating in a tapered nozzle. This produces a jet of water which impinges on the vane in the form of a Flat Plate, Hemispherical Cup, Conical Plate or 30° Angled Plate. The nozzle and vane are contained within a transparent cylinder; at the base of the cylinder there is an outlet by which the...
Member (1) is a solid 50 mm diameter cylinder made from magnesium. The modulus of elasticity is 44.7 GPa and the thermal coefficient of expansion is 26 x 106/°C. The cylinder is placed in a clamp when the temperature is 20℃ Two stainless steel carriage bolts (2) hold the cylinder snug with negligible force against the rigid jaws of the clamp. Each bolt has a diameter of 10 mm, modulus of elasticity of 193 GPa, and a coefficient of thermal...
A circular pipe, with an outside diameter of 30 mm and a wall thickness of 4 mm, is held stationary in a stream of air for which T-30°C, F-1 atm , and V-25 m/s . The pipe, which is made of PVC, experiences cross-flow conditions in the moving air 1) The temperature at the inner surface of the pipe is maintained at 90°C. The outer surface of the pipe is smooth. Also, assume that steady-state conditions exist. Since the outer...
A long horizontal cylinder with diameter of d-60 mm and length of L-1 m is at 27°C and is placed in a quiescent environment at 4°C. Find the cooling rate (q). End effects (heat transfer from the two ends of the cylinder) are negligible. The following relation (Churchill and Chu) for Nusselt number can be used. Air (T-288.5K): v=14.87x10° m2/s, k=0.0254 w/m-K, α=21.0x10-6 m2/s, Pr-0.71, B-3.47x1031/K. 1. Quiescent air 7,-4°C 0.06 m diameter T 27 C L=1m MUD 10.60 +...
Q3. A very long horizontal cylinder of Unobtainium, of diameter 100 mm, is initially at a uniform temperature of 500 K. The cylinder is cooled by a fan. The fan blow airs, with a temperature of 300 K, over the cylinder at a velocity of 6 m/s in a direction perpendicular to the axis of the cylinder. Calculate a) the average convective heat transfer coefficient at the beginning of the cooling process when the initial temperature of the cylinder is...
Experiment (7) Drag Force TASK DETAILS Students must use the following equation in order to calculate the drag force on a cylindrical sample placed inside a wind tunnel at varying velocities 1 For CopAV Where: Cp is the drag coefficient p is the density of the fluid through which the body is moving (Pair = 1.225 kg/m?) v is the velocity of the body relative to the fluid A is the projected cross-sectional area of the body perpendicular to the...
02: A bar of 60 mm diameter and length of 3 meter is used to produce 500 pieces on a center lathe having the following characteristics: . Maximum rotational speed .Minimum rotational speed .Number of speeds Lathe overall efficiency The turning process is performed at 40 m/min cutting velocity. 0.5 mm/rev longitudinal feed, 0.25 mm/rev transverse feed and 2 mm depth of cut REQUIRED 1. Calculate the TWELVE rotational speeds in rpm. 2. What rotational speed would you choose? 3....
Qi. A flat plate of width 1 m and length 0.2m is maintained at a temperature of 32°C. Ambient fluid at 22"C fBlows across the top of the plate in parallel flow. Determine the average heat transfer coefficient, the convection heat transfer rate from the top of the plate, and the drag force on the plate for the following: (a) The Buid is water flowing at a velocity of 0.5 m/s. o) Water is flowing at a velocity of 2.5...
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C and leaves the tubes at 6 MPa and 450°C with a velocity of 80 m/s. Calculate the velocity of the water at the tube inlet and the inlet volume flow rate. [5-14] 2. Air enters a nozzle steadily at 50 psia, 140°F, and 150 ft/s and leaves at 14.7 psia and 900 ft/s. The heat loss from the nozzle is estimated to be 6.5...
Objective To determine the force generated by a jet of water striking on a surface Description of apparatus The supply is led to a vertical pipe terminating in a tapered nozzle. This produces a jet of water which impinges on the vane in the form of a Flat Plate, Hemispherical Cup, Conical Plate or 30° Angled Plate. The nozzle and vane are contained within a transparent cylinder; at the base of the cylinder there is an outlet by which the...
Most questions answered within 3 hours.
-
A 24-cm diameter piston sits atop a 54000 cm3 canister of 1 mol
of nitrogen at...
asked 3 minutes ago -
B1: orders for clothing from flowers manufacturing for
this year’s National days season must be placed...
asked 14 minutes ago -
Target ROI is 16%
Invested Capital is $343171
Full Cost per unit $1779
Expected sales volume...
asked 10 minutes ago -
Suppose that Guru and Premier produce only beats and
rhymes. Guru can produce at most 400...
asked 13 minutes ago -
What is the unit for mu? Does it matter if we use kg for mass or...
asked 31 minutes ago -
Develop a complete parser that executes with the scanner. You
must show the execution of this...
asked 33 minutes ago -
Which of the following is false regarding osmosis and diffusion?
a) A single glycogen molecule will...
asked 50 minutes ago -
20.
A diamond mine is expected to produce regular annual cash flows
of $1 million for...
asked 52 minutes ago -
Within the client’s IT system, supplier information is contained
in a supplier master file (SMF). Each...
asked 51 minutes ago -
Explain why sound travels faster in warm air than in cool air.
Suppose the room temperature...
asked 57 minutes ago -
The measured glucose level one hour after having a sugary drink
varies according to the normal...
asked 1 hour ago -
Mic2 is a gene present on both the X and Y chromosome
of humans. Suppose a...
asked 1 hour ago