S. (2 Marks) An alloy with an average grain diameter of 35 um has a yield...
The yield strength for an alloy that has an average grain
diameter of 5.7 × 10-2 mm is 140 MPa. At a
grain diameter of 7.3 × 10-3 mm, the yield
strength increases to 277 MPa. At what grain diameter, in mm, will
the yield strength be 228 MPa?
d =
mm
We were unable to transcribe this imageThe yield strength for an alloy that has an average grain diameter of 5.7 x 10-2 mm is 140 MPa. At a...
The yield strength for an alloy that was an average grain diameter of 5.4 x 102 mm is 133 MPa. At a grain diameter of 7.4 x 10 mm, the yield strength increases to 250 MPa. At wh grain diameter, in mm, will the yield strength be 203 MPa? mm the tolerance is +/-6% Click if you would like to Show Work for this question: Open Show Work
Problem 4 The yield point of a steel that has an average grain diameter of 21.3 um is 202 MPa. At a grain diameter of 7.4 um, the yield point increases to 286 MPa. At what grain diameter will the yield point be 315 MPa?
An uncold-worked brass specimen of average grain size 0.008 mm has a yield strength of 163 MPa. Estimate the yield strength of this alloy (in MPa) after it has been heated to 600°C for 1500 s, if it is known that the value of ky is 12.7 MPa-mm 1/2. The Animated Figure 7.25 may be helpful. MPa [The tolerance is +/- 10%.]
Question 3 10 pts The lower yield point for an iron that has an average grain diameter of 40um is 100 MPa. At a grain diameter of 6.4μm, the yield point increases to 160MPa At what grain diameter (in um)will the lower yield point be 128.8 MPa? (round to two decimal places)
An uncold-worked brass specimen of average grain size 0.008 mm has a yield strength of 151 MPa. Estimate the yield strength of this alloy (in MPa) after it has been heated to 600°C for 1220 s, if it is known that the value of ky is 11.5 MPa-mm 1/2. The Animated Figure 7.25 may be helpful. MPa (The tolerance is +/- 10%.) Click if you would like to Show Work for this question: Open Show Work
2. A 1-meter long cylindrical rod made of near-perfect metal has an elastic modulus of 50 GPa and yield strength of 50 MPa. The rod is anticipated to sustain up to a tensile force of 1 x 10°N in an engineering application. (a) If only 1 mm of elongation is allowed, what is the minimum diameter for the rod? [15 points) (b) The yield strength of the rod is too small for certain applications. Smaller grains need to be created...
10. Write a one-page summary of the attached paper? INTRODUCTION Many problems can develop in activated sludge operation that adversely affect effluent quality with origins in the engineering, hydraulic and microbiological components of the process. The real "heart" of the activated sludge system is the development and maintenance of a mixed microbial culture (activated sludge) that treats wastewater and which can be managed. One definition of a wastewater treatment plant operator is a "bug farmer", one who controls the aeration...