pls post correct answer Calculate the steady state mass transfer coefficient for diffusion from the wall...
A differential nitrogen pressure exists across a 2-mm-thick steel furnace wall. After some time, steady-state diffusion of the nitrogen is established across the wall. Given that the nitrogen concentration on the high-pressure surface of the wall is 5 kg/m3kg/m3 and on the low-pressure surface is 0.3 kg/m3 , calculate the flow of nitrogen through the wall (in kg/m2.h) if the diffusion coefficient for nitrogen in this steel is 1.0 ×10−10m2/s at the furnace operating temperature. Express your answer to three...
A) Determine the convection heat transfer coefficient for the flow of air. [W/m2·°C] B) Determine the convection heat transfer coefficient for water. [W/m2·°C] The velocity of the fluid is 9 m/s in an 8-cm diameter and 7-m-long tube when the tube is subjected to uniform heat flux from all surfaces. Use fluid properties at 25°C. Water or Air D 8 cm L=7 m Given: The properties of air at 25°C are: k 0.02551 W/m."C v 1.562 10-5 m2/s Pr =...
An artificial kidney uses porous hollow fibers to purify blood. Blood containing urea flows through the fibers and urea diffuses out, through the porous fiber wall. Tens of thousands of such fibers were used in an artificial kidney. We would like to determing the fraction of the urea removed as blood flows through one such fiber. The fiber has a radius of R = 100 µm and length L = 10 cm. The flow rate of blood (viscosity 0.03 g/cm/s...