Homework Answers
Add Answer to:
10. Water flows through 5 meter lonq section of concrete pipe with a diameter of 10.5...
11. Water at 11 kPa flows through a horizontal 2 meter diameter pipe at a velocity...
11. Water at 11 kPa flows through a horizontal 2 meter diameter pipe at a velocity of 2 m/s and an elevation of 6 meters. If the density of water is 1000 kg/mA3 and the specific weight is 9.8 KN/mA3, what is the total pressure? Round to the nearest kPa.
The required water flow rate in the 6 cm diameter 30-meter long circular pipe in the...
The required water flow rate in the 6 cm diameter 30-meter long circular pipe in the diagram below is 12 liters per second. The water temperature is 4 °C and the flow discharges into the atmosphere at a pressure of PB = 100 kPa. The flow is fully developed turbulent flow and there is no elevation change. The surface of the wall has become degraded due to pitting and deposits such that there is a surface roughness with a height...
Water flows through a pipe at a velocity of 1 m/s. The pipe has a relative roughness of 0.001 and...
Water flows through a pipe at a velocity of 1 m/s. The pipe has a relative roughness of 0.001 and has a diameter of 100 mm 1. Using the information provided above and in the Moody diagram, drag and drop circle 1 (located below the graph) where the corresponding Reynolds number and relative roughness intersect 2. Drag and drop circle 2 to the point on the y axis at which you would measure the friction factor () v 10-6 m2/s...
4. Water flows through the pipe as shown with Bolts 80 mm the coefficient of friction...
4. Water flows through the pipe as shown with Bolts 80 mm the coefficient of friction between the wheels and the surface is μ = 0.3 . If the weight of the 20m horizontal pipe (roughness = 0.15 mm) is 200N with a diameter of 80mm (Neglect Minor Losses): 3.0 m Galvanized iron What is the velocity in the horizontal pipe and friction factor? 1. What is the fluid pressure at the location of the Bolts? 2. 3. Draw a...
Doe: 4pm, August 27,2018 Question 1 will be marked in detail For Question 1, use the...
Doe: 4pm, August 27,2018 Question 1 will be marked in detail For Question 1, use the problem-solving protocol and show all working, Questions 2, 3,4 and 5 will be marked for quality and complctcnecss only and can be trcated as extensions of Question 1. Solutions will be provided aftert the marking is compickt 1. Water flows through a very loag 50 mam ID Onternal Diameter) galvanised iroa pipe. The pipe is horizontal and has an internal roughness height af ε...
Water flows from left reservoir to right reservoir in a 5 cm diameter pipe system as...
Water flows from left reservoir to right reservoir in a 5 cm diameter pipe system as shown in the figure. The pipe is made out of cast iron which has a sand roughness of 0.26 mm Discharge in the pipe system is given as 0.006 m/s. Dynamic viscosity of water is 1.3 x 103 kg/ms. Density of water is 1000 kg/m2 Determine the friction factor? water 9 m 4 m 80 m 0.011 0.021 0.031 0.041
5 points Water flows from left reservoir to right reservoir in a 5 cm diameter pipe...
5 points Water flows from left reservoir to right reservoir in a 5 cm diameter pipe system as shown in the figure. The pipe is made out of cast iron which has a sand roughness of 0.26 mm. Discharge in the pipe system is given as 0.006 m/s. Dynamic viscosity of water is 1.3 x 103 kg/m.s. Density of water is 1000 kg/m Determine the friction factor? water 9 m 4 m 80 m 0.011 0.021 O 0.031 0.041
1. For water at 20 C flowing through a straight smooth pipe at 0.06 m/h, the...
1. For water at 20 C flowing through a straight smooth pipe at 0.06 m/h, the pipe diameter for which transition to turbulence will occur is approximately a. 1.0 cm b. 1.5 cm c.2.0 cm d. 2.5 cm e. 3.0 cm 2. Find the Reynold number, the roughness parameter, the friction factor f and the pressure drop for flow of water at 20 C through a 5 cm diameter pipe of roughness height E=0.5 mm if the flow rate is...
Water flows through a cast iron pipe at a velocity of 4.2 m/s. The pipe is...
Water flows through a cast iron pipe at a velocity of 4.2 m/s. The pipe is 400 m long and has a diameter of 150 mm. The friction factor is 0.00593. Determine the Reynolds number and head loss due to friction.
A fluid of density 1300 kg/m3 flows out through a 3 meter diameter pipe without friction at a rat...
A fluid of density 1300 kg/m3 flows out through a 3 meter diameter pipe without friction at a rate of 1500 L/s. Find the velocity of the fluid as it flows out of the 3 meter diameter pipe. Note that the 'speed' sensor does not give enough significant figures... use the sensor, to prove your calculations (and not the opposite!) Submit Answer Tries 0/99 Calculate the velocity of the fluid if the pipe constricts to a diameter of 1 meter....
11. Water at 11 kPa flows through a horizontal 2 meter diameter pipe at a velocity of 2 m/s and an elevation of 6 meters. If the density of water is 1000 kg/mA3 and the specific weight is 9.8 KN/mA3, what is the total pressure? Round to the nearest kPa.
Water flows through a pipe at a velocity of 1 m/s. The pipe has a relative roughness of 0.001 and has a diameter of 100 mm 1. Using the information provided above and in the Moody diagram, drag and drop circle 1 (located below the graph) where the corresponding Reynolds number and relative roughness intersect 2. Drag and drop circle 2 to the point on the y axis at which you would measure the friction factor () v 10-6 m2/s...
4. Water flows through the pipe as shown with Bolts 80 mm the coefficient of friction between the wheels and the surface is μ = 0.3 . If the weight of the 20m horizontal pipe (roughness = 0.15 mm) is 200N with a diameter of 80mm (Neglect Minor Losses): 3.0 m Galvanized iron What is the velocity in the horizontal pipe and friction factor? 1. What is the fluid pressure at the location of the Bolts? 2. 3. Draw a...
Doe: 4pm, August 27,2018 Question 1 will be marked in detail For Question 1, use the problem-solving protocol and show all working, Questions 2, 3,4 and 5 will be marked for quality and complctcnecss only and can be trcated as extensions of Question 1. Solutions will be provided aftert the marking is compickt 1. Water flows through a very loag 50 mam ID Onternal Diameter) galvanised iroa pipe. The pipe is horizontal and has an internal roughness height af ε...
Water flows from left reservoir to right reservoir in a 5 cm diameter pipe system as shown in the figure. The pipe is made out of cast iron which has a sand roughness of 0.26 mm Discharge in the pipe system is given as 0.006 m/s. Dynamic viscosity of water is 1.3 x 103 kg/ms. Density of water is 1000 kg/m2 Determine the friction factor? water 9 m 4 m 80 m 0.011 0.021 0.031 0.041
5 points Water flows from left reservoir to right reservoir in a 5 cm diameter pipe system as shown in the figure. The pipe is made out of cast iron which has a sand roughness of 0.26 mm. Discharge in the pipe system is given as 0.006 m/s. Dynamic viscosity of water is 1.3 x 103 kg/m.s. Density of water is 1000 kg/m Determine the friction factor? water 9 m 4 m 80 m 0.011 0.021 O 0.031 0.041
1. For water at 20 C flowing through a straight smooth pipe at 0.06 m/h, the pipe diameter for which transition to turbulence will occur is approximately a. 1.0 cm b. 1.5 cm c.2.0 cm d. 2.5 cm e. 3.0 cm 2. Find the Reynold number, the roughness parameter, the friction factor f and the pressure drop for flow of water at 20 C through a 5 cm diameter pipe of roughness height E=0.5 mm if the flow rate is...
A fluid of density 1300 kg/m3 flows out through a 3 meter diameter pipe without friction at a rate of 1500 L/s. Find the velocity of the fluid as it flows out of the 3 meter diameter pipe. Note that the 'speed' sensor does not give enough significant figures... use the sensor, to prove your calculations (and not the opposite!) Submit Answer Tries 0/99 Calculate the velocity of the fluid if the pipe constricts to a diameter of 1 meter....
Most questions answered within 3 hours.
-
A 50g ice cube is taken out of a freezer at 0 degrees Celsius
and put...
asked 1 hour ago -
How do ratios help you determine trends? What specific
information do managers look at? Is there...
asked 1 hour ago -
A wavelength of 514 nm is used to find an unknown diffraction
grating. If the separation...
asked 1 hour ago -
Use the central limit theorem to find the mean and standard
error of the mean of...
asked 1 hour ago -
You will be given a file that will contain averages for classes
which are divided into...
asked 1 hour ago -
A Pew Research Center poll surveyed a random sample 850 voters
and asked them if they...
asked 1 hour ago -
Design a class named
NumDays, to
store a value that represents a number of hours and...
asked 1 hour ago -
(R)-2-chloro-(S)-3-bromobutane and
(S)-2-chloro-(S)-3-bromobutane are: A. enantiomers. B.
diastereomers. C. meso compounds. D. the same molecule.
asked 1 hour ago -
1_ What is the Frank-Starling law of the heart? And why the
heart cannot function on...
asked 2 hours ago -
The method of tree ring dating gave the following years A.D. for
an archaeological excavation site....
asked 2 hours ago -
Calculate (in N) the force a mother must exert to hold her 12.0
kg child in...
asked 2 hours ago -
A new lie-detector test has been devised and must be tested
before it is put into...
asked 2 hours ago